Oil and Gas

Course catalogue

Category

Reset

Course type

Course provider

Reset
  • Mintra Trainingportal
hits
6
Course code: MTP-010
Course type: E-learning course
Duration: 1 hour
Language: Norwegian
Price: NOK 1150,-

This course provides a basic review and update of knowledge of rigging operations in accordance with applicable standards and regulations.

All rigging operations shall be performed according to applicable safety regulations. These specifications are stipulated in the NORSOK R-003 standard and in the Regulations for using work equipment.

Only personnel who have documented rigger training may perform rigging operations. This course provides a basic review and update of knowledge of rigging operations in accordance with applicable standards and regulations.

 

Course Content

-Introduction
-Rigging operations in general
-Fastening
-Handling loads
-Using beam clips
-Clamps and travelling clamps

Course code: MTP-011
Course type: E-learning course
Duration: 2,5 hours
Language: Norwegian
Price: NOK 1150,-

All usage, storage, and inspections of lifting equipment shall be in accordance with the producer’s instructions and requirements stipulated in the NORSOK R-003 standard.  Lifting equipment shall be used only by personnel who have and can document competence in lifting operations.

 

This course provides a basic review and update of knowledge of lifting equipment in accordance with applicable standards.

The course requires completed modules 0-1.1 in the basic slinger course, fall safety, and simple lifting equipment modules 0-2.2.  In addition, practical experience slinging loads is required.

 

Course Content

-General information about lifting and lifting equipment
-Information about marking and tagging, material properties, correct usage and scrapping criteria for the following lifting equipment: fibre straps and big bags, chain slings, steel straps, shackles, eyebolts and eye nuts, lifting caps and turnbuckles, load bearers
-Using lifting equipment, fall safety and specific lifting equipment.

Course code: MTP-009
Course type: E-learning course
Duration: 2,5 hours
Language: Norwegian
Price: NOK 1150,-

The NORSOK R-003 standard, Safe Use of Lifting Equipment is the industry standard for operating lifting equipment on the Norwegian continental shelf.


The course, “Safe Use of Offshore Cranes”, builds on NORSOK R-003 and is an important means for satisfying governmental regulations for maintaining and verifying competence in the safe use of lifting equipment.


The course focuses ongood work practices, as well as good attitudes and understanding of safety for crane operations, in accordance with the NORSOK R-003 standard.


Course Content:
-Introduction
-Rolls and responsibilities
-Planning and supervising
-Communication
-Supply vessels
-Load bearers
-Chemicals
-Lifting to and from the rig floor
-Using guy wires
-Lifting drilling pipes and casings
-Assembly and disassembly lifts
-Lifting scaffolding material and planks
-Operating blind
-Personnel lifts

Course code: MTP-010
Course type: E-learning course
Duration: 1 hour
Language: English
Price: NOK 1150,-

This course provides a basic review and update of knowledge of rigging operations in accordance with applicable standards and regulations.

All rigging operations shall be performed according to applicable safety regulations. These specifications are stipulated in the NORSOK R-003 standard and in the Regulations for using work equipment.

Only personnel who have documented rigger training may perform rigging operations. This course provides a basic review and update of knowledge of rigging operations in accordance with applicable standards and regulations.


Course Content 
-Introduction
-Rigging operations in general
-Fastening
-Handling loads
-Using beam clips
-Clamps and travelling clamps

Course code: MTP-011
Course type: E-learning course
Duration: 2,5 hours
Language: English
Price: NOK 1150,-

All usage, storage, and inspections of lifting equipment shall be in accordance with the producer’s instructions and requirements stipulated in the NORSOK R-003 standard.  Lifting equipment shall be used only by personnel who have and can document competence in lifting operations.

 

This course provides a basic review and update of knowledge of lifting equipment in accordance with applicable standards.

The course requires completed modules 0-1.1 in the basic slinger course, fall safety, and simple lifting equipment modules 0-2.2.  In addition, practical experience slinging loads is required.

 

Course Content

-General information about lifting and lifting equipment 
-Information about marking and tagging, material properties, correct usage and scrapping criteria for the following lifting equipment: fibre straps and big bags, chain slings, steel straps, shackles, eyebolts and eye nuts, lifting caps and turnbuckles, load bearers 
-Using lifting equipment, fall safety and specific lifting equipment.

Course code: MTP-009
Course type: E-learning course
Duration: 2,5 hours
Language: English
Price: NOK 1150,-

The NORSOK R-003 standard, Safe Use of Lifting Equipment is the industry standard for operating lifting equipment on the Norwegian continental shelf.


The course, “Safe Use of Offshore Cranes”, builds on NORSOK R-003 and is an important means for satisfying governmental regulations for maintaining and verifying competence in the safe use of lifting equipment.


The course focuses ongood work practices, as well as good attitudes and understanding of safety for crane operations, in accordance with the NORSOK R-003 standard.


Course Content:
-Introduction
-Rolls and responsibilities
-Planning and supervising
-Communication
-Supply vessels
-Load bearers
-Chemicals
-Lifting to and from the rig floor
-Using guy wires
-Lifting drilling pipes and casings
-Assembly and disassembly lifts
-Lifting scaffolding material and planks
-Operating blind
-Personnel lifts

Hits per page