Oil and Gas

Course catalogue

hits
656
Course code: MUK-067
Course type: E-learning course
Duration: 20 minutes
Language: English
Price: NOK 500,-

Who is this course for?

Trainee Oil and Gas Operations Technicians

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

 

How will this course benefit me?

This course aims to provide an overview of fuel systems

 

How will this course benefit my company?

By ensuring you have an overview of fuel systems

 

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: PRO-006
Course type: E-learning course
Duration: 2-3 hours
Language: Norwegian
Price: NOK 950,-

Induction course in HSE is designed so that participants will have the first necessary expertise to ensure safety challenges in their daily work. This occurs in part through increased awareness of what is valuable and should be prioritized. The course also draws attention to the main framework governing the HSE The course is designed in order to create interest and motivation to work with HSE in the workplace.

 

Course contents

The course is divided into three topics:

-Care! - To take care of each other

-Terms and conditions - Laws, regulations and rules

-The challenging life - how to work without going wrong

 

Participants will

-Be motivated to work with safety in the workplace.

-Understand the relationship between a good safety work and preventing loss of important values such as life, health and nature in balance.

-Get an introduction to the main control elements of the HSE 

-Get advice on how they can work safely under time pressure and stress situations

 

Course provider: Proactima

Course code: MUK-144
Course type: E-learning course
Duration: 15 Minutes
Language: English
Price: NOK 500,-

Who is this course for?

Personnel requiring awareness or understanding of glycol regeneration.

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

 

How will this course benefit me?

This course aims to provide learners with an overview of the process of glycol regeneration

 

How will this course benefit my company?

By ensuring you have an overview of the process of glycol regeneration.

 

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: APP-008
Course type: E-learning course
Duration: 3 hours
Language: Polish
Price: NOK 650,-

Section 7 of the “Safety Regulations for Work and Operation of Electrical Equipment and Installations” (FSE) sets requirements for yearly FSE training for relevant personnel. This e-learning course takes you through the requirements of the regulations and gives you training and instruction in FSE. The course focuses on safety for work on low voltage installations.

 

Course code: MGM-041
Course type: E-learning course
Duration: 45 minutes
Language: English
Price: NOK 600,-

Who is this course for?

Maritime personnel who require an introduction to or awareness of maritime Protection and Indemnity insurance.

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course. 

 

How will this course benefit me?

This course aims to provide personnel with an awareness of the principles of maritime Protection and Indemnity Insurance.

 

How will this course benefit my company?

By ensuring you have an understanding of the maritime Protection and Indemnity Insurance. 

 

What standards are referred to in this course?

The Marine Insurance Act.

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Course code: NOG-OSC1141-REP
Course type: Classroom course
Duration: 2 days
Language: Norwegian
Price: From NOK 11500,-

The object of this course is to help participants maintain and develop their knowledge, skills and attitudes regarding their operational / emergency response function.

 

Course Content

Portions of this course will include group discussion and exchange of experiences, led by a helicopter pilot in active offshore service or with experience from offshore flying:

- Experiences from helideck service

- Improvement potential

 

Participants should also be able to: 

- Learn from the experience and incidents of other helideck personnel.

- Transfer their own experience as heliguards/HLO to other helideck crews.

 

This course is valid for 24 months.

Course code: MTP-085
Course type: E-learning course
Duration: 45 minutes
Language: English
Price: NOK 600,-

Who is the course for?

This course is aimed at individuals working in industrial sectors whose activities can impact the environment.

Is previous experience required?

You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role.

How will the course benefit me?

This course will give you a basic understanding of environmental ‘aspects’ and ‘impacts’ and explain the purpose of an Environmental Management System (EMS).

The knowledge gained in this course will help you to stay in compliance with legislative requirements. It will also explain how you can play your part in improving environmental performance.

How will the course benefit my company?

By ensuring you are fully aware of the role of ISO 14001 in environmental management, you contribute to continual improvement in environmental performance, as well as ensuring that you operate in compliance with relevant regulations and legislation.

What standards are referenced in the course?

ISO 14001

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: PRO-016
Course type: E-learning course
Duration: 4-6 hours
Language: English
Price: NOK 1900,-

COURSE DESCRIPTION

In a risk assessment,  potential events and consequences are considered. In this course, we focus on unwanted events such as failures and accidents. This could be, for example, a gas leak or afire at an oil platform, that equipment stops working during an operation in a hospital, or that an accident occurs during the execution of a work task. The risk analysis process consists of three phases:

1) Planning

2) Risk assessment

3) Risk management

This course shows how these phases can be planned and implemented in practice. There are many guidelines and standards on how a risk assessmentcan be carried out, and many are adapted to particular industries and professional areas. This course presents a general approach that can be used in most industries.



COURSE CONTENT

•Introduction:What is risk? What is the purpose of a risk assessments?

•Risk assessment and risk management:Description of the steps in a risk assessment, what is important to look out for in the various steps, and how the risk assessment can be applied in risk management.

•Risk analysis methods:There are numerous risk assessment methods that are suitable for looking at different issues. An introduction is given to some of these; Hazid/ course risk analysis, SJA, HAZOP, FMEA and QRA. It’s crucial to choose a method that is well adapted to the problem you are looking at.



STANDARDS REFERRED TO IN THIS COURSE

- ISO 31000:2018 Risk Management



HOW WILL THIS COURSE BENEFIT ME, AND MY COMPANY?

After completing the course, participants should be able to understand what a risk assessment is and have knowledge of the relevant steps. Participants will also have basic knowledge of:

•Different risk analysis methods.

•Choice of risk analysis methods within the three main categories; simplified risk assessment, standard risk assessment and model-based risk assessment.

•Typical pitfalls for planning and carrying out risk assessments.

•Understanding how risk assessments can contribute to decision support.



For more information and prices:

http://www.hseacademy.com

learning@proactima.com

Phone: + 47 4000 1933

Course code: MUK-085
Course type: E-learning course
Duration: 180 minutes
Language: English
Price: NOK 1500,-

Who is this course for?

All personnel who work with or on board Floating Production Storage and Offloading units (FPSOs).

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

This course aims to provide learners with an overview of industry best practice for FPSO vessel operations.

How will this course benefit my company?

The course will benefit companies by ensuring that all relevant personnel have an overview of industry best practice for FPSO vessel operations.

What standards are referred to in this course?

• International Convention for the Safety of Life at Sea (SOLAS)

• Port State Authority/Flag State

• International Maritime Organization (IMO)

• International Association of Classification Societies (IACS)

• American Bureau of Shipping (ABS)

• China Classification Society (CCS)

• Det Norske Veritas (DNV)

• Germanischer Lloyd (GL)

• Korean Register of Shipping (KR)

• Lloyd’s Register (LR)

• Nippon Kaiji Kyokai (ClassNK) (NK)

• Registro Italiano Navale (RINA)

Is there an assessment?

Once you have completed each section of the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the section and have a pass mark of 80%.

Course code: KOL-002
Course type: Classroom course
Duration: 16 hours
Language: Norwegian
Price: From NOK 8400,-

Hensikten med kurset er å gi blivende kranførere god teoretisk og praktisk grunnopplæring på fastmonterte hydrauliske kraner. Kurset gir elevene god innsikt i prinsippene for kranens konstruksjon og virkemåte. Etter endt kurs med bestått teoretisk prøve vil denne sammen med bestått praktisk kjøreprøve være grunnlaget for utstedelse av kranførerbevis G20 Fastmontert hydrauliske kraner.

Opplæringen dekker kompetansekrav i NORSOK standard R003N for Kranfører G20. 

Kursinnhold
- Innledning
- Konstruksjon
- Hydraulikk
- Mekanikk
- Lover / forskrifter / standarder
- Ståltau / vinsj / blokker
- Dokumentasjon
- Sikkerhetsbestemmelser
- Løfteredskap
- Øvingsoppgaver
- Eksamen

This course is only available in Norwegian.

Course code: MUK-228
Course type: E-learning course
Duration: 130 minutes
Language: English
Price: NOK 1350,-

Who is this course for?

Personnel requiring an awareness or understanding of asset stability.

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

 

How will this course benefit me?

This course aims to provide learners with a basic understanding of the principles of asset stability.

 

This course consists of following sections:

Section One: ‘An Introduction to Asset Stability’

Section Two: ‘Understanding the Curve of Statical Stability (GZ Curve)’

Section Three: ‘Free Surface Effect’

Section Four: ‘Stability Criteria and Regulations’

Section Five: ‘Structural Strength’

 

How will this course benefit my company?

By ensuring you have a basic understanding of the principles of asset stability.

 

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: NS-1591
Course type: Classroom course
Duration: 4 days
Language: Norwegian
Price: From NOK 14000,-

An important part of Hytorc Norway's overall concept is courses and training in working on flanges and bolted connections. We have been involved in the development of courses since OLF started its Gas Leakage Project in 2003 and up to today's requirements which are in accordance with NS-EN 1591-4.


The industry's requirements for training have yielded results in the form of a significant reduction in the number of leaks both on and offshore. Executing operators gain better understanding and increased competence, which also provides a safer everyday life in this important work.

Basic courses in flange work run over four days of theoretical and practical training. Examination is carried out for both parts and upon passing, this gives an approval that is valid for five years.

Within the expiration date, a one-day refresher course must be completed, which, upon passing, gives a new five-year validity.

In Stavanger and Bergen, courses are conducted in new adapted premises. In addition, we have the opportunity to hold complete courses at the customers.

The main goal of the course is to provide the necessary and required training to be able to perform independent work on flanges and bolted connections.

The timetable covers the following tables in
NS EN 1591-4: 2013: 1, 2, 3, 6, 7 and 8.


Course code: MUK-157
Course type: E-learning course
Duration: 15 Minutes
Language: English
Price: NOK 500,-

Who is this course for?

Personnel requiring an awareness or understanding of the management of hydrocarbon releases.

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

 

How will this course benefit me?

This course aims to provide an overview of managing hydrocarbon releases

 

How will this course benefit my company?

By ensuring you have an overview of managing hydrocarbon releases

 

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: MUK-151
Course type: E-learning course
Duration: 15 minutes
Language: English
Price: NOK 500,-

Who is this course for?

Personnel requiring an awarneess or understanding of hydraulic systems.

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

 

How will this course benefit me?

This course aims to introduce learners to the different types of hydraulic systems.

 

How will this course benefit my company?

To ensure a minimum company understanding of different types of hydraulic systems found in the Oil and Gas Industry.

 

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%. 

Course code: MUK-172
Course type: E-learning course
Duration: 90 minutes
Language: English
Price: NOK 500,-

Who is this course for?
All well intervention personnel working with tools where explosives are an integrated part of the operation

Is previous experience required?
You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

How will this course benefit me?
This course aims to give learners an introduction to explosives used in well intervention operations

How will this course benefit my company?
By ensuring you have an introduction to explosives used in well intervention operations

What standards are referred to in this course?
N/A

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: MUK-089
Course type: E-learning course
Duration: 3 hours
Language: English
Price: NOK 1500,-

Who is this course for?

Personnel requiring awareness and understanding of Natural Gas & LNG and associated HSE considerations.

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

 

How will this course benefit me?

This course aims to improve your knowledge of Natural Gas Liquid and LNG including transport and HSE considerations.

 

This course contains nine modules:

Module 1: An Overview of Gas Liquids

Module 2: Chemical and Physical Properties of Gas Liquids

Module 3: Liquefied Petroleum Gas

Module 4: Natural Gas Liquids (NGL) Recovery

Module 5: Removal of Natural Gas Impurities

Module 6: Liquefaction of Natural Gas

Module 7: Shore-Based Storage of Gas Liquids

Module 8: Transportation of Liquefied Natural Gas

Module 9: Health, Safety and Environmental (HSE) Issues of Gas Liquids

 

How will this course benefit my company?

To ensure you have an understanding of NLG, LNG, transportation and HSE considerations.

 

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice. 

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: IMIST-002
Course type: E-learning course
Duration: 300 minutes
Language: Brazilian Portuguese
Price: USD 99,-

Who is the course for?

This eLearning course is aimed at individuals who work offshore, in any role, anywhere in the world.

 

Is previous experience required?

The course is designed for existing workers in the oil and gas industry. Completion of this course awards an IMIST certificate valid for four years, after which you will need to sit the course again to refresh your knowledge and earn a new certificate.

 

How will the course benefit me?

The offshore working environment is home to many hazards, which means that it is vital for everyone who goes offshore to have the same baseline level of safety knowledge. This course has been created with OPITO to set a global safety standard by applying a consistent level of safety awareness across nine safety critical areas and is applicable.

The knowledge gained in this course will help you to stay safe in your day-to-day activities offshore. It will also outline some of the systems and procedures in place to manage everyday operations offshore.

 

How will the course benefit my company?

By ensuring that your safety knowledge is at or above the baseline level, your company can rest assured that you are able to work offshore safety and in compliance with regulations and company procedures. Increased safety knowledge helps to prevent incidents and makes your working environment a safer place.

 

What standards are referenced in the course?

This course is written based on the OPITO standard International Minimum Industry Safety Training Standard (IMIST) (5312). As a global standard, the course is not written to meet any specific regional legislation but references industry best practices and standard operating procedures throughout.

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 100%. 

The course starts with an optional pre-assessment that checks your existing knowledge of the course topics. The course will restructure so that it only contains the content needed to address the gaps in your knowledge.


Please find pre-course information and learning outcomes here: 

https://mintra.com/implementing-maintaining-opito-standards-policy

Course code: NOV-002
Course type: Classroom course
Duration: 24 hours
Language: Norsk
Price: From NOK 22500,-

Dette kurset tilfredsstiller krav i Norsok R-003 tillegg B.8 og B.9 vedlikehold og verifikasjon av kompetanse. Simulator trening bør gjennomføres minst hvert tredje år for kranoperatører G5 offshorekran, dekksoperatører kan delta for å øke risikoforståelse, holde seg oppdatert på regelverk.

Målsetningen med kurset er at kranoperatør skal tilegne seg tilstrekkelig kunnskap om sikker bruk av G5 offshorekraner til å håndtere last internt på innretning, til og fra fartøy mellom faste eller flytende innretninger og undervannsløft på en sikker måte. Risikoforståelse, riktig adferd, teknisk systemforståelse og krav i NORSOK R-003 er hovedfokus under gjennomføring.


Kursinnhold: 
- Kartlegging av kompetanse
- Kjennskap til ulykker innen kran- og løfteoperasjoner
- Lover, forskrifter, standarder og brukermanual
- NORSOK R-003 sikker bruk av løfteutstyr
- Løfteinnretningens tekniske oppbygning og virkemåte
- Løfteinnretningens sikkerhetssystemer
- Vedlikehold og sakkyndig kontroll
- Planlegging av løfteoperasjoner
- Simulatortrening: kritiske løfteoperasjoner, personalløft med MOB-båt/personalbasket og løft under marginale værforhold
- Simulatortrening: Bruk av sikkerhetssystemer, AOPS, MOPS, nødlåring og nødkjøring
- Simulatortrening: fokus på personlig faktor og reaksjonsmøter
- Evaluering etter hver øvelse i simulator
- Teoretisk eksamen


Påmelding

- Påmeldingsskjema skal fylles ut og returneres sammen med en PO eller akseptert betalingsmetode.
- PO eller akseptert betalingsmetode kan sendes til RA-NOR-AMAdminSupport@nov.com. 
- Ordrebekreftelse og Joining Instruction vil bli sendt så snart deltakeren har fått plass.


Kansellering

- Hvis kjøper kansellerer mindre enn tretti (30) dager før oppstartsdato, vil kjøper bli belastet 100% av beløpet for opplæringen.
- Selger forbeholder seg retten til å kansellere og / eller planlegge ny dato på kurs med lav påmelding opptil to (2) uker før startdato for kurset.


No show

Ved manglende oppmøte, forbeholder selger seg retten til å fakturere kjøper for "no show" 100 % av beløpet for opplæringen.

 

NATIONAL OILWELL VARCO, L.P. OG DETS AFFILIATER VILKÅR OG BETINGELSER gjelder for alle kurs. 

Course code: NOG-143-1
Course type: Classroom course
Duration: 4 days
Language: Norwegian
Price: From NOK 19500,-

The course is in accordance with the Norwegian oil and gas training curricula - courses in valve technology.  The course is a combination of theory and practical application and concludes with a web-based exam, which takes about 2 hours to complete.


This training will help participants make their daily work with valves simpler and safer.
 
Course Content
- Operate different valve types optimally
- See the difference between the different types of valves
- See if valves are functioning properly
- Test valves
- Perform 1st line maintenance
- Ensure that valves are and remain atmospherically sealed
- Dismantle and install valves on the line

Course code: KOL-001
Course type: Classroom course
Duration: 24 hours
Language: Norwegian
Price: From NOK 8000,-

Hovedmål med kurset er å gi personer som skal utøve rollene som signalgiver, anhuker, dekksoperatør, boredekksarbeider, rigger og operatør av løfteinnretning opplæring i vurdering og forståelse av farer samt sikker bruk, vedlikehold, daglig kontroll og kasseringsregler for ulike typer løfteredskap. Anhuker og signalgiver skal samhandle og kommunisere med operatør av løfteinnretning i enhver løfteoperasjon på en slik måte at uønskede hendelser unngås.

 

Kursinnhold
- Innledning
- Lover, forskrifter og standarder
- Personlig verneutstyr og farlig gods
- Krav til signaldgiver og anhuker
- Planlegge, gjennomføre og evaluere
- Oppbevaring, bruk og kontroll av løfteredskaper
- Sikkerhet for personell
- Kritiske løfteoperasjoner
- Løftetabeller
- Praktisk bruk løfteredskaper
- Evaluering og avsluttende prøve

 

Modul 1.1 (8 timer) Arbeidsmiljø, ansvar og konsekvenser 

Modul 2.3 (16 timer) G11- Løfteredskap 



This course is only available in Norwegian.

Hits per page
| 1 ... 14 ... |