Renewables

Course catalogue

hits
166
Course code: STQ-012
Course type: Classroom course
Duration: 1 day
Language: Norwegian / English
Price: From NOK 1990,-

Objective: The purpose of the training is to provide users of work equipment mentioned in § 10-1 and 10-3 in «Regulations on the performance of work» (no. 1357), a good general basic training in the safe use of work equipment, so that accidents and accidents in connection with use is avoided.

The authorities set requirements for basic safety certification of persons who are to drive forklifts, mass transfer machines and cranes. The requirements include both theoretical and practical training. To complete the common theory, one must take and pass a theoretical exam.

Module 1.1 Working environment, responsibilities and consequences are common to machine, forklift and crane. If you can document that you have module 1.1 from before that is not older than 3 years, you can start right on module 2.3.

Content:

- Laws and regulations
- Working environment, responsibilities, and consequences
- Environmental
- Safety regulations
- Dangerous goods, marking and handling

 

Course code: STQ-015
Course type: Classroom course
Duration: 16 hours (2 days)
Language: Norwegian
Price: From NOK 7990,-

Hensikt:

Målsetting med opplæring er at den som gis opplæring tilegner seg tilstrekkelig kunnskap om metoder for å lede og veilede løfteoperasjoner slik at de blir forskriftmessig utført.

Opplæringen gir også kunnskap om farer forbundet med løfteoperasjoner samt bruk av risikokartlegging.

Kurset gir deltakere kunnskap til å kunne utøve overordnet operasjonell ledelse av løfteoperasjoner. Med det menes å kunne planlegge, risikokartlegge og evaluere, samt forebygge ulykker. Videre vil deltaker også tilegne seg kunnskaper om å gjøre rede for materialhåndteringsplan, oppbevaring og bruk av utstyr.


Målsetting med opplæring er at den som gis opplæring tilegner seg tilstrekkelig kunnskap om metoder for å lede og veilede løfteoperasjoner slik at de blir forskriftmessig utført.


Innhold:

• Krav og ansvar til rollen operasjonelt ansvarlig

• Lover, forskrifter, standarder og retningslinjer som gjelder vedr. bruk av løfteutstyr

• Overordnet operasjonell ledelse av løfteoperasjoner

• Helhetlig planlegging av løfteoperasjoner

• Risikokartlegging

• Identifisering av og etablering av barrierer. Gjennomføring og evaluering av en løfteoperasjon

• Informasjonsutveksling

• Krav for oppbevaring av løst løfteutstyr

• Krav for ulike typer løfteutstyr

• Krav til fadder, praksis og sensor

• Avsluttende prøve

Course code: STQ-006
Course type: Classroom course
Duration: 1 day
Language: Norwegian
Price: From NOK 3490,-

Objective: The aim of the training is that theoretical and practical knowledge about fall protection and the correct use of rescue equipment, rescue of free-hanging persons, rescue of personnel over open sea, tank, stretcher transport, descent and treatment of personnel after fall accident is refreshed and repeated.


The training is adapted for personnel who are part of fall protection / rescue teams on board an installation. Participants must gain expertise in risk assessment, rescue (equipment and methods) and first aid.

Covers repetition requirements every 2nd year in accordance with NOG 113 and SFS.


Content:

Introduction
Regulations
Review of accidents and incidents
The rescue service
Equipment
Routines when working at height
Risk assessment
Management, site of injury
Stress and stress management
Hanging trauma, CPR
Rescue drills
Evaluation

 

Course code: AST-005
Course type: E-learning course
Duration: 500 hours
Language: English
Price: GBP 2628,-

Provided in association with Astutis, NEBOSH Learning Partner 807.


The NEBOSH National Diploma in Occupational Health and Safety is an advanced health and safety qualification. Equivalent to an undergraduate degree in OHS. The NEBOSH Diploma is NEBOSH's flagship qualification. It is recognized by employers and professional bodies in over 180 countries around the world!

The qualification will develop competence in all areas of health and safety so you can reduce risk in dangerous environments and keep people safe. It is the ideal course if you want a successful, long-term career in health and safety.

 

Unit A: Managing Health and Safety

This unit provides an in-depth understanding of the key areas for managing health and safety, covering moral, economic, and societal drivers, health & safety law, and health & safety management systems. 

 

A1 - Principles of health & safety management

A2 - Principles of health & safety law

A3 - Criminal Law

A4 - Civil Law

A5 - Loss causation and incident investigation

A6 - Measuring and reviewing health and safety           

A7 - Identifying hazards, assessing and evaluating risk

A8 - Risk control

A9 - Organisational factors

A10 - Human factors

A11 - The role of health & safety practitioner

 

Unit B: Hazardous Agents in the Workplace

Unit B details all major aspects of managing chemical, biological, physical and physiological hazards in the workplace.

 

B1 - Managing Occupational Health

B2 - Identification, assessment & evaluation of hazardous substances

B3 - Control of hazardous substances

B4 - Monitoring and measuring

B5 - Biological agents

B6 - Physical agents - noise and vibration

B7 - Physical agents - radiation

B8 - Mental ill-health & dealing with violence & aggression at work

B9 - Musculoskeletal risks and controls

B10 - Work environment risks and controls

 

Unit C: Workplace and Work Equipment Safety

Unit C provides a thorough understanding of how to create and manage safe working environments, covering welfare, fire, dangerous substances, work equipment, electricity, construction, and transport. 

 

C1 - Workplace welfare requirements and specific workplace issues

C2 - Fire and explosion

C3 - Workplace fire risk assessment

C4 - Storage, handling, and processing of dangerous substances

C5 - Work equipment (general)

C6 - Work equipment (workplace machinery)

C7 - Mobile, lifting, access, and work at height equipment

C8 - Electrical safety 

C9 - Construction & works of a temporary nature - hazards and controls

C10 - Workplace transport and driving for work

Course code: STQ-003
Course type: Classroom course
Duration: 3 days
Language: Norwegian
Price: From NOK 7900,-

Objective: The aim of the training is that those who are given training are given the opportunity to acquire theoretical and practical knowledge about fall protection and the correct use of rescue equipment, rescue of free-hanging persons, rescue of personnel over open sea, tank, stretcher transport, descent and treatment of personnel after fall accident.


The training is adapted for personnel who are part of fall protection / rescue teams on board an installation, but also for personnel who want a basic understanding of a rescue operation, evacuation equipment after a fall accident when using fall protection / rescue equipment.

The course runs over 3 days (24 hours)

Repetition 2 every year in accordance with NOG 113 and SFS.

 

Content:

- Introduction
- Regulations, guidelines
- Best practice
- Risk assessment
- Fall protection equipment
- Use of personal protective equipment
- Knowledge of different equipment and methods
- The equipment's limitations and possibilities
- Requirements for maintenance, storage and control
- Consequences of falls

Practical and theoretical review of rescue exercises

- Planning and risk assessment of rescue
- Basic first aid
- Rescue operation w / fresh air equipment
- Rescue of a hanging person
- Rescue from tanks / cramped spaces
- Rescue over open sea
- Descent / hoisting of person
- Stabilization of person
- Knowledge of hanging trauma

Course code: EXT-012
Course type: Classroom course
Duration: 2 days
Language: Norwegian
Price: From NOK 11200,-

This course is made for personell envolved in design, planning, projecting, installation and maintenance on electrical installations and equipment offshore. 

The purpose of the standard is to minimize the hazards to people and equipment, whilst optimizing dependability.

Objective: The purpose of the standard is to minimize the hazards to people and equipment, whilst optimizing dependability.


Content:

- An easy to understand overview and explanation of the committees/regulations/standards and how they are intertwined. 

- Presentation of the regulations and norms: PTIL 5 HMS, Nek 410 (IEC 60092), Nek 420 (IEC 60079), ATEX directives including standards and the Norsok series. 

- The structure and history of the IEC 61892 series, and the scope and application. 

- By using a fictive, illustrated installation, we will focus on the practical elements covered in the following standards: 

o IEC 61892-1 - General requirements and conditions 

o IEC 61892-2 - System Design 

o IEC 61892-3 – Equipment 

o IEC 61892-4 – Cables 

o IEC 61892-6 – Installation 

 

o IEC 61892-7 – Hazardous areas

 

This course is only available in Norwegian.

Course code: WBB-003-12
Course type: Course package
Duration: 10 hours
Language: English
Price: GBP 250,-

With COVID-19 meaning that home working is no longer an option but a necessity for many, what are the potential side effects on our health and work performance. Employers may need to provide additional training to ensure appropriate supervision and work behaviours. These include remote technology, communication skills development, time management and ergonomics.

 

Managing remote teams and business continuity are operational priorities for companies during the COVID-19 pandemic.  Remote working allows some operations to continue and facilitate flexible work schedules, which typically improves individual performance. However, greater flexibility and leading teams remotely puts a greater burden on managers and makes supervision more complex. 

 

The group of workers who experience most difficulty in handling ‘boundary-less’ working are actually managers.  This is mainly because they are connected longer in their ‘non-working time’.

 

The ‘Managing Remote Teams’ bundle includes 3 months access to 10 online courses and over 10 hours of eLearning. 

 

• Negativity in the Workplace

• Decision Making

• Supporting Change: 03-Your Path to Supporting Change

• Management 101: 02-Leading and Communicating as a Manager

• Smart Management: Managing a Geographically Distributed Workforce

• Health and Safety for Home Workers (Managers)

• Lone Working (Managers)

• An Effective Leader’s Guide to Time Management

• Team Building IV: Conflict Management

• Essential Skills of Leadership: 05-Lead Effective Meetings

Course code: GWO-005
Course type: Classroom course
Duration: 8 hours
Language: Norwegian
Price: From NOK 4800,-

Basic first aid for the wind industry.

Upon completion of the Global Wind Organization (GWO) Basic Safety Training (BST), delegates will have awareness of the dangers that arise when working in the wind industry and how to control and reduce these dangers.

The course covers the requirements for training of personnel and refresher courses both onshore and offshore wind in accordance with:

 

- Global Wind Organization (GWO)

 - Labor Inspection (Regulations)

 

Competence for "First Aid" must be maintained in accordance with. guideline in the GWO standard. It shall be conducted refresher training every 2 years.

 

Norwegian only

Course code: STQ-002
Course type: Classroom course
Duration: 3 days
Language: Norwegian / English
Price: From NOK 5990,-

Objective: The purpose of the course is to provide forklift drivers with a good theoretical basic training in the safe use of forklifts, so that accidents in connection with forklift driving are avoided.


Module 1.1 - Basic theoretical module
Module 2.2 -Forklift theory
Module 3.2 - Basic practice forklift.

The course is primarily aimed at future users of forklifts. But anyone who is involved with cargo handling and forklifts in risk analysis and work management can also benefit from the course.

The course is conducted with Norwegian-language teachers and teaching materials in accordance with legislation and regulations, as well as recognized curricula for module-based training.

The forklift driver training consists of four modules:

- Module 1.1 working environment, responsibilities and consequences. *
- Module 2.2 G4 bridge and overhead crane
- Module 3.2 Basic practical training forklift 
- Module 4.2 Practical driving training forklift
- Practical Final test in each forklift type T1-T4

* Module 1.1 is common to machine, forklift and crane. If you can document that you have module 1.1 from before that is not older than 3 years, let us know.

Module 4.2 can be completed in a company using a sponsorship arrangement. If you do not have the opportunity to do so, you can participate in one of STQ's practice courses.


Content:

- Safety training, laws, regulations
- Forklift types
- Electric forklift - construction
- Stability
- Daily inspection and maintenance
- Material and goods handling
- HMS
- Proper use of the forklift
- The theory course ends with a theoretical exam

Course code: STQ-004
Course type: Classroom course
Duration: 2 days
Language: Norwegian
Price: From NOK 7300,-

Objective: The training is intended to provide personnel with good theoretical and practical basic training in the use and maintenance of steel ropes.


The course provides a thorough introduction to knowledge about steel ropes, the correct use / choice of steel ropes and what requirements are set for those who use and control steel ropes.

Regulations on the performance of work, use of work equipment and associated technical requirements (regulations on the performance of work) §10-1. Requirement for documented safety training for work equipment that requires special care during use 

When an employer after a risk assessment finds that the work equipment requires special care during use, only employees who have documented safety training according to §10-2 §10-2 can be used. Requirements for documented safety training when using work equipment

Anyone who is to use work equipment as mentioned in §10-1 and §10-3, must have practical and theoretical training that provides knowledge of construction, operation, use properties and area of use, as well as maintenance and control.


Content:

- Basic theory of steel ropes
- Construction
- Properties
- End parties
- Cast blocks / Wire discs
- The right choice of wire rope
- Proper use of wire ropes
- Proper winding and running in of steel ropes
- Maintenance of steel ropes
- Lubrication of steel ropes
- Damage to steel ropes
- Disposal rules
- Checking of wire ropes in accordance with standard ISO-4309
- Exam

Course code: EXT-009
Course type: Classroom course
Duration: 1 day
Language: Norwegian
Price: From NOK 6000,-

This is a course for electrical installations in potentially explosive areas.

Our goal is to make sure that employees are motivated to work safely and securely.   


Topics:

• General principles for explosion protection

• Area classification and zone division

• Gas groups and the connection between area and equipment

• Temperature classes and the connection between area and equipment

• The general principles for type of protection and labeling

 

Standards:

• NEK 420

• IEC / NEK EN 60079-10-1

• IEC / NEK EN 60079-14

 

This course is only available in Norwegian.

Course code: APP-014
Course type: E-learning course
Duration: 90 Minutes
Language: English
Price: NOK 1390,-

The course is for performing personnel whose work may affect the safety of electrical installations through the use of possible ignition sources.

The course is in accordance with EN IEC 60079-14, NEK 420, the Petroleum Act, the ATEX Directive.

Course code: GWO-004
Course type: Classroom course
Duration: 4 hours
Language: Norwegian
Price: From NOK 3100,-

Basic Fire Awareness for the wind industry.

Upon completion of the Global Wind Organization (GWO) Basic Safety Training (BST), delegates will have awareness of the dangers that arise when working in the wind industry and how to control and reduce these dangers.

The course covers the requirements for training of personnel and refresher courses both onshore and offshore wind in accordance with:

 

- Global Wind Organization (GWO)

- Labor Inspection (Regulations)

 

Competence for "Fire Awareness" must be maintained in accordance with. guideline in the GWO standard. It shall be conducted refresher training every 2 years.

Norwegian only

Course code: LSI-002
Course type: E-learning course
Duration: 4 hours 30 minutes
Language: Polish
Price: NOK 1190,-

This course covers the theoretical part of the documented safety training required for slingers and signallers. The course is also suitable as a refresher for crane operators and other personnel who have previously completed training in lifting appliances and lifting gear. The course content deals with selection, control and safe use of the most common lifting gear used in construction, industry, shipping and offshore. Signalling, communication and controlling the load are key topics of the course.

In addition, the course requires that practical training is conducted on applicable work equipment.

 

The course contains 9 modules:

• Lifting equipment, expressions and acronyms

• Slinging, center of gravity, working angles and lifting tables

• Fibre slings

• Lifting gears of chain

• Wire rope slings

• Shackles

• Eye bolts, nuts and lifting lugs

• Signals and signs, and control of load

• Safety regulations for lifting operations

Course code: DP-2266
Course type: E-learning course
Duration: Not set
Language: Norsk
Price: NOK 450,-

E-læringskurset gir deg en opplevelsesrik og praktisk opplæring i e-postprogrammet Outlook 2016. En kombinasjon av videoer, teori, oppskrifter, oppgaver og tester gjør det enkelt å lære seg de nye funksjonene og verktøyene. E-læringskurset inneholder 46 opplæringsvideoer.

E-læringskurset er tilpasset Office 365.

Testene i e-læringskurset måler kunnskap før, under og etter opplæringen. Når ettertesten er bestått får du tilgang til et kursbevis i PDF-format som enkelt kan lagres eller skrives ut.

 

Innhold:

- Før du starter

- Sending av meldinger

- Behandling av meldinger

- Kalender

- Personer

- Oppgaver og notater

Course code: DP-2268
Course type: E-learning course
Duration: Not set
Language: Norsk
Price: NOK 450,-

E-læringskurset gir deg en opplevelsesrik og praktisk opplæring i operativsystemet Windows 10. En kombinasjon av videoer, teori, oppskrifter, oppgaver og tester gjør det enkelt å lære seg de nye funksjonene. E-læringskurset inneholder 35 opplæringsvideoer.

E-læringskurset viser bruk av både berøringsskjerm, mus og tastatur.

Testene i e-læringskurset måler kunnskap før, under og etter opplæringen. Når ettertesten er bestått får du tilgang til et kursbevis i PDF-format som enkelt kan lagres eller skrives ut.

 

Innhold:

- Bli kjent med Windows 10

- Skrivebordet

- Arbeide med apper

- Innstillinger

Course code: WBB-001
Course type: Course package
Duration: 9 hours
Language: English
Price: GBP 99,-

With COVID-19 meaning that home working is no longer an option but a necessity for many, what are the potential side effects on our health and work performance. Employers may need to provide additional training to ensure appropriate supervision and work behaviours. These include remote technology, communication skills development, time management and ergonomics. 

 

Maintaining health and well-being while working from home encompasses many areas, including ergonomics, preventing feelings of isolation and effectively managing stress. Studies have found that more than half of people working from home had not paid any attention to ergonomics, and 94% of them reported that neither had their employers. Almost half of remote workers have experienced work-related pains. One of the most problematic aspects of home working is the isolation and the lack of access to day-to-day informal interactions. While remote working enables greater autonomy, it also leads to higher levels of work intensity. The ‘24/7’ availability for work can result in family conflict and stress. Key areas to promote a positive work-family interface include the parental ability to cope with children and amicable resolutions of conflict about working hours, household work and personal time in the family.

 

The ‘Healthy Home Working’ bundle includes 3 month access to 12 online courses and over 9 hours of eLearning.

 

• Stress Awareness

• Working Time Limits and Fatigue Management

• Display Screen Equipment (DSE)

• Ergonomics

• Health and Safety for Home Workers (Employees)

• Medicine Awareness

• Smart Health: Sleeping – How to Ensure You Are Well-Rested & Energized

• Smart Mental Health: Managing Anger and Emotions

• Smart Mental Health: Keys to Successful Parenting

• Smart Health: Drinking Responsibly

• Smart Mental Health: Reducing Stress and Anxiety

• Smart Mental Health: Mastering Marriage

Course code: WBB-003
Course type: Course package
Duration: 10 hours
Language: English
Price: GBP 99,-

With COVID-19 meaning that home working is no longer an option but a necessity for many, what are the potential side effects on our health and work performance. Employers may need to provide additional training to ensure appropriate supervision and work behaviours. These include remote technology, communication skills development, time management and ergonomics.

 

Managing remote teams and business continuity are operational priorities for companies during the COVID-19 pandemic.  Remote working allows some operations to continue and facilitate flexible work schedules, which typically improves individual performance. However, greater flexibility and leading teams remotely puts a greater burden on managers and makes supervision more complex. 

 

The group of workers who experience most difficulty in handling ‘boundary-less’ working are actually managers.  This is mainly because they are connected longer in their ‘non-working time’.

 

The ‘Managing Remote Teams’ bundle includes 3 months access to 10 online courses and over 10 hours of eLearning. 

 

• Negativity in the Workplace

• Decision Making

• Supporting Change: 03-Your Path to Supporting Change

• Management 101: 02-Leading and Communicating as a Manager

• Smart Management: Managing a Geographically Distributed Workforce

• Health and Safety for Home Workers (Managers)

• Lone Working (Managers)

• An Effective Leader’s Guide to Time Management

• Team Building IV: Conflict Management

• Essential Skills of Leadership: 05-Lead Effective Meetings

Course code: EXT-010
Course type: Classroom course
Duration: 1 day
Language: Norwegian
Price: From NOK 6000,-

This is a course for electrical installations in potentially explosive areas.

Objective: Our goal is to make sure that employees are motivated to work safely and securely.

 

Topics:

• General principles of explosion protection 

• Site classification and zone section 

• Gas groups and the connection between site and equipment 

• Temperature classes and the connection between the site and equipment 

• General principles for the type of protection and tagging 

• Inspection and maintenance in explosive environment 

• How maintenance work is carried out in explosive environment

• What the participant can do itself, and what needs to be submitted to the authorized repair shop

 

Standards:

• NEK 420

• IEC / NEK EN 60079-10-1

• IEC / NEK EN 60079-14


This course is only available in Norwegian.

Course code: STQ-001
Course type: Classroom course
Duration: 3 days
Language: Norwegian / English
Price: From NOK 5990,-

Objective: To give the person who is to work with a traverse crane knowledge about safe use, daily control and maintenance as well as competence to avoid accidents and incidents.


The authorities set requirements for basic safety certification of persons who are to operate bridge and overhead cranes. The requirements include both theoretical and practical training

G4 Bridge and Traverse Crane Basic course consists of modules 2.7 and 3.7. To complete the course, you must take and pass a theoretical exam.

Proper use of overhead cranes is of great importance for the safety of crane operators and other personnel who participate in lifting operations. Incorrect assessments can have major consequences and lead to serious injuries to the crane driver, other personnel as well as equipment and surroundings. Positive attitudes towards safety are therefore important during training.

The crane driver training for G4 consists of five modules:

- Module 1.1 working environment, responsibilities and consequences. *
- Module 2.3 G11 Lifting gear (strap and sling).
- Module 2.7 G4 bridge and overhead crane
- Module 3.7 Basic practical training G4
- Module 4.7 Practical driving training G4
- Practical Final test G4

* Module 1.1 is common to machine, forklift and crane. If you can not document that you have module 1.1 from before that is not older than 3 years, this must be taken again.

Module 4.7 can be completed in a company using a sponsorship arrangement. If you do not have the opportunity to do so, you can participate in one of STQ's practice courses.


Content:

- Introduction with requirements for the driver
- Applications for overhead cranes
- Accidents with bridge and overhead cranes
- Construction of different types
- Electrical system on bridge and traverse cranes
- Safety switches
- Steel rope / block
- Certification / documentation
- Inspection and maintenance
- Main components
- Checkpoints
- Overload safety equipment
- Practical use of lifting equipment
- Driving technique

Hits per page
| 1 ... 8 |