Course catalogue

This is a course for electrical installations in potentially explosive areas.

Our goal is to make sure that employees are motivated to work safely and securely.

Topics:

• Understand the general principles of type of specific protection and correct labeling of components approved in intrinsically safe facility (IS)

• Current Exi Standard

• Could choose to install the correct Exi equipment in hazardous areas accordance with IEC 60079-14 standards and 60079-25

• How to work safely with IS

• Requirements for competence to perform work on Exi installations

• How to verify and calculate an Exi circuit

Standards:

• NEK EN 60079-11

• NEK EN 60079-14

• NEK EN 60079-25

• IEC 60079-11

• IEC 60079-14

• IEC 60079-25

This course is only available in Norwegian.

Hovedmålet med kurset er å gi deltakerne generelle kunnskaper og ferdigheter som «kompetent person» i periodisk kontroll av ass. fallsikringsutstyr.

Hovedmålet med kurset er at den som gis opplæring tilegner seg tilstrekkelige kunnskaper om sikker bruk av traverskraner, slik at ulykker ved bruk unngås.

Regelverksreferanse:

Modul 2.7 - 3.7 - 4.7

Kurset gir en grunnleggende innføring i høytrykkslanger og kuplinger og er et naturlig grunnlag for drifts- og vedlikeholdspersonell som skal foreta inspeksjon og vedlikehold på høytrykksutstyr der slanger inngår som kritiske faktorer i systemet.

Kunne utføre forebyggende inspeksjoner og vedlikehold i henhold til etablerte prosedyrer og leverandørens bruksanvisninger, kunne registrere uregelmessigheter som f.eks høy temperatur, lekkasjer i slanger og kuplinger.

Hensikt:

Etter kurset skal deltagerne ha tilegnet seg kunnskap om høytrykkslanger og kuplinger for å kunne foreta visuell inspeksjon og kontroll for å ivareta sikkerheten, avdekke eventuelle lekkasjer slik at uønskede hendelser ikke oppstår.

Innhold:

Standarder og retningslinjer ( TR 1803 )

Merking og dokumentajon 

Sikkerhetskrav / HMS ved bruk av slanger og kuplinger 

Tabeller for slanger og kuplinger med oppbygning og forståelse 

Inspeksjon og kontroll av slanger

Definisjoner

Bruk av Hose, Dats Sheet

Vedlikeholdskonsept for slanger og kuplinger

Visuel inspeksjon. Gjenger, kuplinger og slanger

 Feil- og degraderingsmekanismer

 Slangelære inkl. Installasjonsgeometri

 Håndtering og oppbevaring av slanger

This course is only available in Norwegian.

The modern workplace is often thought of as a strictly professional, rational, logical environment. Cooperation is key--personal opinions and emotions must be put aside in the name of teamwork, which may be easier said than done! No one can expect to connect with fellow colleagues the way they do their own friends or family members. One crossed word or bad mood can damage corporate relations, sometimes irreparably. The uncertainty of the business environment of today, and resulting stress that follows only adds to the pressure workers feel in performing their level best. Feeling overworked and overwhelmed is natural in the workplace, especially when it comes to dealing with change.   The purpose of this course is to illustrate ways you can overcome the emotional barriers you may face in the workplace. This course will guide you through various exercises and give you tips to help you manage your emotions at work so you can perform to the best of your abilities.

This course in only available is Norwegian.

Norske myndigheter stiller krav til at arbeidstakere som skal jobbe i stolpe kan dokumentere praktisk og teoretisk opplæring. Kurset gir en grunnleggende teoretisk og praktisk innføring i hvordan man kan jobbe på en sikker måte i stolpe. Arbeidsgiver er ansvarlig for at arbeidstakerne har den nødvendige opplæring. («Forskrift om utførelse av arbeid»).

Hensikt:

Kurset skal gi deltakerne en grunnleggende teoretisk og praktisk innføring i hvordan man kan jobbe på en sikker måte i stolpe.

Innhold:

– Lover og forskrifter

– Kontroll, daglig og periodisk

– Oppbevaring og vedlikehold

– Bruk av stolpeslynge, støttestropp og stolpesko

– Evakuering med smartline

– Kameratredning med smartline

– Risikovurdering

– Egenkontroll/vurdering av stolpen

Provided in association with Astutis, approved centre 1857.

IOSH Managing Occupational Health and Wellbeing course will provide managers with the practical advice and tools to help create a healthy and productive workplace.

IOSH Managing Occupational Health and Wellbeing is targeted at line managers and offers them practical advice to manage health risks and understand their responsibilities for the health and wellbeing of staff.  It equips line managers with the basic tools and techniques to play their part in improving health and wellbeing across their organisation.

The course is split into 4 modules and covers:

• Importance of managing workplace health and wellbeing

• Health risk management

• Fitness for work and the need to manage changes in the health status of employees

• The business value of promoting a wellbeing programme

Upon completion of the Global Wind Organization (GWO) Basic Safety Training (BST), delegates will have awareness of the dangers that arise when working in the wind industry and how to control and reduce these dangers.

The course covers the requirements for training of personnel and refresher courses both onshore and offshore wind in accordance with:

- Global Wind Organization (GWO)

- Labor Inspection (Regulations)

Competence for "Working at heights" must be maintained in accordance with. guideline in the GWO standard. It shall be conducted refresher training every 2 years.

Section 3-5 of the Working Environment Act requires every organisation’s most senior manager to be able to document training in HSE work. This obligation is personal and may not be delegated, and the completed training must be documented in writing.
The HSE course for managers provides an introduction to the most important aspects of the HSE work, and is undertaken in accordance with the Norwegian Labour Inspection Authority’s guidelines for this type of training. A course certificate is issued upon completion of the course in order to fulfil the written documentation requirement.

The following topics are covered in the HSE course for managers:
– Introduction to the content and structure of the Working Environment Act
– Information about the Working Environment Act’s regulations
– Roles in the HSE work
– Working environment requirements
– Physical and psychosocial working environment
– How to establish, implement and maintain an HSE system at the workplace

Kurset starter med fellesteori som er en grunnleggende innføring i aktuelle lover og forskrifter og en grunnleggende innføring i sikker bruk av arbeidsutstyr. Fagdelen vil gi eleven en god teoretisk grunnopplæring i sikker bruk av masseforflyttingsmaskiner samt en god innsikt i oppbygging, virkemåte, vedlikehold og bruk.

Eleven skal gjennomføre teorimodul 1.1 (8 timer), modul 2.1 (24 timer) og  3.1 (8 timer). Dette skal gi førerne en god generell grunnopplæring i sikker bruk og praktisk forståelse for prinsippene for masseforflytningsmaskiner.

Kurset gjennomføres over 5 dager, og avsluttes med en teoretisk prøve.

Etter bestått teoretisk prøve og gjennomført grunnleggende praktisk bruk modul 3.1 + praksiskjøring 32 timer, kan praktisk prøve gjennomføres. Bestått praktisk prøve vil være grunnlag for utstedelse av kompetansebevis for fører av masseforflyttingsmaskin i valgt klasse.

Kursinnhold

- Konstruksjon

- Oppbygging

- Betjening

- Bruksegenskaper

- Bruksområder

- Sikkerhetsutstyr

- Viktige kontrollpunkter

- Vedlikehold


This course in only available in Norwegian.

Hovedmålet med kurset er at den som gis opplæring tilegner seg tilstrekkelige kunnskaper om sikker bruk av personløftere, slik at ulykker ved bruk unngås.

Regelverksreferanse:

F-2699 Statoil rev.

Hensikt: Grunnleggende overlevelsestrening for offshore vindindustri. 

Ved gjennomføring av Global Wind Organization (GWO) Basic Safety Training (BST) vil delegatene ha en bevissthet om farene som oppstår når de arbeider i vind-industrien og hvordan man kontrollerer og reduserer disse farene.

Kursdeltakerne vil få (repetert) kunnskap og ferdigheter til å anerkjenne fordeler og begrensninger knyttet til livreddende utstyr og PVU samt korrekt bruk av dette i forbindelse med offshore vind. 

Hensikten med kurset er å gi deltakerne kunnskaper/oppfriskning om livreddende utstyr, GMDSS og SAR utstyr, hvordan en kollektivt kan øke sjansen til overlevelse i en nødsituasjon, hvordan entre og forlate vindturbiner, samt evakuering i nødsituasjoner. 

Kurset dekker krav til opplæring av personell og repetisjonskurs både land- og havvind iht:

- Global Wind Organization (GWO)

- Arbeidstilsynet (Forskrifter)


Kompetanse for «Sea Survival» skal vedlikeholdes iht. retningslinje i GWO standarden. Det skal gjennomføres repetisjonskurs hvert 2. år.

This course is only available in Norwegian.

Norske myndigheter stiller krav til at arbeidstakere som skal jobbe i mast kan dokumentere praktisk og teoretisk opplæring. Kurset gir en grunnleggende teoretisk og praktisk innføring i hvordan man kan jobbe på en sikker måte i mast. Arbeidsgiver er ansvarlig for at arbeidstakerne har den nødvendige opplæring. («Forskrift om utførelse av arbeid»).

Hensikt:

Kurset skal gi deltakerne en grunnleggende teoretisk og praktisk innføring i hvordan man kan jobbe på en sikker måte i mast.

Innhold:

– Lover og forskrifter

– Kontroll, daglig og periodisk

– Oppbevaring og vedlikehold

– Evakuering med smartline

– Kameratredning med smartline

– Risikovurdering

This course is only available in Norwegian.

Norske myndigheter krever at alle bygg skal være forsvarlig brannsikret i henhold til byggeforskriftene. Kurset gjør deltakerne kjent med de aktuelle forskriftene som gjelder og hvordan og hvorfor man utfører branntetting. Innføring i brannceller, brannseksjoner, bygningstekniske forhold og grunnleggende kunnskap som er nødvendig for å gjennomføre branntetting på en sikker og forskriftsmessig måte. 

Hensikt:

Gi deltakerne økt kunnskap om brannceller, brannseksjoner, bygningstekniske forhold og grunnleggende kunnskap som er nødvendig for å gjennomføre branntetting på en sikker og forskriftsmessig måte.

Innhold:

– Lover og forskrifter

– Hvorfor branntetting

– Brannceller og brannseksjoner 

– Brannsikring av gjennomføringer i brannskillende konstruksjoner

– Løsninger for branntetting og brannfuging

– Dokumentasjon

Objective: The purpose of the training is to provide users of work equipment mentioned in § 10-1 and 10-3 in «Regulations on the performance of work» (no. 1357), a good general basic training in the safe use of work equipment, so that accidents and accidents in connection with use is avoided.

The authorities set requirements for basic safety certification of persons who are to drive forklifts, mass transfer machines and cranes. The requirements include both theoretical and practical training. To complete the common theory, one must take and pass a theoretical exam.

Module 1.1 Working environment, responsibilities and consequences are common to machine, forklift and crane. If you can document that you have module 1.1 from before that is not older than 3 years, you can start right on module 2.3.

Content:

- Laws and regulations
- Working environment, responsibilities, and consequences
- Environmental
- Safety regulations
- Dangerous goods, marking and handling

Provided in association with Astutis, NEBOSH Learning Partner 807.

The NEBOSH National Diploma in Occupational Health and Safety is an advanced health and safety qualification. Equivalent to an undergraduate degree in OHS. The NEBOSH Diploma is NEBOSH's flagship qualification. It is recognized by employers and professional bodies in over 180 countries around the world!

The qualification will develop competence in all areas of health and safety so you can reduce risk in dangerous environments and keep people safe. It is the ideal course if you want a successful, long-term career in health and safety.

Unit A: Managing Health and Safety

This unit provides an in-depth understanding of the key areas for managing health and safety, covering moral, economic, and societal drivers, health & safety law, and health & safety management systems. 

A1 - Principles of health & safety management

A2 - Principles of health & safety law

A3 - Criminal Law

A4 - Civil Law

A5 - Loss causation and incident investigation

A6 - Measuring and reviewing health and safety           

A7 - Identifying hazards, assessing and evaluating risk

A8 - Risk control

A9 - Organisational factors

A10 - Human factors

A11 - The role of health & safety practitioner

Unit B: Hazardous Agents in the Workplace

Unit B details all major aspects of managing chemical, biological, physical and physiological hazards in the workplace.

B1 - Managing Occupational Health

B2 - Identification, assessment & evaluation of hazardous substances

B3 - Control of hazardous substances

B4 - Monitoring and measuring

B5 - Biological agents

B6 - Physical agents - noise and vibration

B7 - Physical agents - radiation

B8 - Mental ill-health & dealing with violence & aggression at work

B9 - Musculoskeletal risks and controls

B10 - Work environment risks and controls

Unit C: Workplace and Work Equipment Safety

Unit C provides a thorough understanding of how to create and manage safe working environments, covering welfare, fire, dangerous substances, work equipment, electricity, construction, and transport. 

C1 - Workplace welfare requirements and specific workplace issues

C2 - Fire and explosion

C3 - Workplace fire risk assessment

C4 - Storage, handling, and processing of dangerous substances

C5 - Work equipment (general)

C6 - Work equipment (workplace machinery)

C7 - Mobile, lifting, access, and work at height equipment

C8 - Electrical safety 

C9 - Construction & works of a temporary nature - hazards and controls

C10 - Workplace transport and driving for work

The Norwegian authorities require that employees who use lifts (personnel lifts) must be able to document practical and theoretical training in their use. The employer is responsible for ensuring that employees receive the necessary training. (“Regulations regarding the execution of work” no. 1357, section 10-2 Requirements regarding documented safety training in the use of work equipment.) The course provides a basic theoretical and practical introduction to the safe use of lifts (personnel lifts). A certificate of competence is issued to participants in order to fulfil the legislation’s documentation requirements.
Objective: To provide course participants with increased knowledge and awareness of safety measures in order to avoid injuries and accidents at the workplace. 

The following topics are covered:
– Assembly
– Operation
– User qualities
– Areas of use
– Maintenance and control
– Safe use and servicing
– Classes A, B and C
– Accidents
– Legislation and regulations

This course is made for personell envolved in design, planning, projecting, installation and maintenance on electrical installations and equipment offshore. 

The purpose of the standard is to minimize the hazards to people and equipment, whilst optimizing dependability.

Objective: The purpose of the standard is to minimize the hazards to people and equipment, whilst optimizing dependability.

Content:

- An easy to understand overview and explanation of the committees/regulations/standards and how they are intertwined. 

- Presentation of the regulations and norms: PTIL 5 HMS, Nek 410 (IEC 60092), Nek 420 (IEC 60079), ATEX directives including standards and the Norsok series. 

- The structure and history of the IEC 61892 series, and the scope and application. 

- By using a fictive, illustrated installation, we will focus on the practical elements covered in the following standards: 

o IEC 61892-1 - General requirements and conditions 

o IEC 61892-2 - System Design 

o IEC 61892-3 – Equipment 

o IEC 61892-4 – Cables 

o IEC 61892-6 – Installation 

o IEC 61892-7 – Hazardous areas

This course is only available in Norwegian.

Objective: The aim of the training is that those who are given training are given the opportunity to acquire theoretical and practical knowledge about fall protection and the correct use of rescue equipment, rescue of free-hanging persons, rescue of personnel over open sea, tank, stretcher transport, descent and treatment of personnel after fall accident.

The training is adapted for personnel who are part of fall protection / rescue teams on board an installation, but also for personnel who want a basic understanding of a rescue operation, evacuation equipment after a fall accident when using fall protection / rescue equipment.

The course runs over 3 days (24 hours)

Repetition 2 every year in accordance with NOG 113 and SFS.

Content:

- Introduction
- Regulations, guidelines
- Best practice
- Risk assessment
- Fall protection equipment
- Use of personal protective equipment
- Knowledge of different equipment and methods
- The equipment's limitations and possibilities
- Requirements for maintenance, storage and control
- Consequences of falls

Practical and theoretical review of rescue exercises

- Planning and risk assessment of rescue
- Basic first aid
- Rescue operation w / fresh air equipment
- Rescue of a hanging person
- Rescue from tanks / cramped spaces
- Rescue over open sea
- Descent / hoisting of person
- Stabilization of person
- Knowledge of hanging trauma

Objective: The aim of the training is that theoretical and practical knowledge about fall protection and the correct use of rescue equipment, rescue of free-hanging persons, rescue of personnel over open sea, tank, stretcher transport, descent and treatment of personnel after fall accident is refreshed and repeated.

The training is adapted for personnel who are part of fall protection / rescue teams on board an installation. Participants must gain expertise in risk assessment, rescue (equipment and methods) and first aid.

Covers repetition requirements every 2nd year in accordance with NOG 113 and SFS.

Content:

Introduction
Regulations
Review of accidents and incidents
The rescue service
Equipment
Routines when working at height
Risk assessment
Management, site of injury
Stress and stress management
Hanging trauma, CPR
Rescue drills
Evaluation