Other

Course catalogue

hits
102
Course code: MGM-007
Course type: E-learning course
Duration: 40 minutes
Language: English, Norwegian
Price: NOK 700,-

Who is this course for?

This course is relevant for all personnel who may affect or be affected by cyber security.

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course. 

 

How will this course benefit me?

This course aims to provide learners with an introduction to cyber-security and cyber-risks, and how by improving personal awareness of cyber-risks can improve cyber-security overall.

 

How will this course benefit my company?

By ensuring you are aware of the cyper-risks. 

 

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: MTP-004
Course type: E-learning course
Duration: 90 minutes
Language: English, Norwegian
Price: GBP 120,-

Who is this course for?

This HSE Chemicals training course is for personnel who require an introduction to or awareness of working with chemicals in the oil and gas industry.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

The course is for all those who work with or can come in contact with chemicals. The course is also intended for those who work on a general basis with workplace environment issues, purchasing, or transportation. The course will give the target group fundamental knowledge of safe use of chemicals.

How will this course benefit my company?

By ensuring you have fundamental knowledge of the safe use of chemicals.

What standards are referred to in this course?

  • REACH
  • The Working Environment Act
  • The Product Control Act
  • The Pollution Control Act
  • The Chemical Labelling Regulations
  • Regulations relating to Organisation, Management and Participation
  • The Internal Control Regulations
  • Performance of Work Regulations
  • The Product Control Regulations

Is there an assessment?

Yes

Course code: MTP-063-FT
Course type: E-learning course
Duration: 2 hours
Language: English, Norwegian
Price: NOK 1200,-

Who is this course for?

Everyone working on low and high voltage installations.

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

 

How will this course benefit me?

The course meets the requirements set in § 7 of the ""Safety Regulations for Work and Operation of Electrical Equipment and Installations- FSE"", that relevant personnel shall be given annual training and instruction in FSE. The course also provides the necessary training and instruction in first aid, focusing on electrical injuries, with the exception of the mandatory practical training in cardio-pulmonary resuscitation (CPR).

The regulations of various authorities make FSE applicable to all those working with electricity, whether on board ship, on platforms or on land. This course is suitable for all, regardless of which industry you work in. 

 

The authorities require that training in FSE and first aid in the event of electrical accidents is undertaken at least once a year. No more than 12 months shall elapse between training courses.

 

How will this course benefit my company?

By ensuring you have the knowledge and competence to be working on low and high voltage installations.

 

What standards are referred to in this course?

 § 7 of the ""Safety Regulations for Work and Operation of Electrical Equipment and Installations- FSE""

 

Is there an assessment?

The fast track version of the FSE course starts with a pre-test which checks the participant's knowledge of FSE. Depending on the answers given, the participant will get a course that is tailored to the level of knowledge revealed in the pre-test. The fast track version of the course is suitable for all but is particularly practical for those undertaking refresher training in FSE. 

 

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

 

Course code: MTP-063
Course type: E-learning course
Duration: 150 minutes
Language: English, Norwegian
Price: GBP 100,-

Who is this course for?

This FSE High and Low Voltage Training course is suitable for everyone working on low and high voltage installations.

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course, but it is assumed that you are competent in your designated role.

How will this course benefit me?

The course meets the requirements set in Section 7 of the ‘Safety Regulations for Work and Operation of Electrical Equipment and Installations – FSE’ which is that all relevant personnel undertake annual training and instruction in FSE. The course also provides the necessary training and instruction in first aid, focusing on electrical injuries, with the exception of the mandatory practical training in cardiopulmonary resuscitation (CPR).

The regulations of various authorities make FSE applicable to all those working with electricity, whether on board ship, on platforms or on land. This course is suitable for all, regardless of which industry you work in.

The authorities require that training in FSE and first aid in the event of electrical accidents is undertaken at least once a year. No more than 12 months shall elapse between training courses.

 

How will this course benefit my company?

By ensuring you have the knowledge and competence to be working on low and high voltage installations.

 

What standards are referred to in this course?

• Section 7 of the ‘Safety Regulations for Work and Operation of Electrical Equipment and Installations – FSE’

• The European standard

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: MTP-016
Course type: E-learning course
Duration: 240 minutes
Language: English, Polish, Norwe ...
Price: GBP 110,-

The e-learning course, “Fire Prevention during Hot Work”, has been quality controlled by the Norwegian Fire Prevention Association and designed is to satisfy the requirements set by the insurance industry.

The course aims to reduce the number of fires caused by hot work and improve knowledge about the risk of fire during hot work.

 

Please Note! 

Before we can inform the Norwegian Fire Prevention Association that you have completed the course, we must receive within 3 months of completing the e-learning a confirmation that you have received fire extinguishing training during the last two years. Please send the proof of the practical training to: learningcentre@mintra.com.

Mintra requires proof of practical completion prior to issuing the Norwegian Fire Protection Association certificate.


Participants who pass the course will be issued a certificate from the Norwegian Fire Prevention Association. The certificate must be renewed every 5 years.

 

All certificates will by default be sent in a digital app to a mobile phone number, no longer a plastic card. The digital certificate is included in the course fee.
If a plastic card is required, an extra fee at NOK 450 will be added to the course fee to cover our cost.

 

You will be required to confirm your identity online before starting this course. In Trainingportal, we have implemented a fully automated process to make this a quick and painless experience.

 

Course Contents

The course focuses on duties and responsibilities during hot work and is divided into the following topics: 

- Hot work
- Regulations
- Fire theory
- Extinguishing fires
- Dangers of hot work
- Risk identification and preventive measures
- Documentation of safety
- If a fire starts

Course code: MUK-207
Course type: E-learning course
Duration: 30 minutes
Language: English (US)
Price: GBP 40,-

Who is this course for?

Personnel requiring an awareness or understanding of US CLP and GHS applications.

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

 

How will this course benefit me?

This course aims to ensure that relevant personnel in the US have a common and consistent understanding of GHS and CLP.

 

How will this course benefit my company?

By ensuring you have a common and consistent approach to company and industry best practice in relation to US GHS and CLP.

 

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: MUK-199
Course type: E-learning course
Duration: 30 minutes
Language: English
Price: GBP 40,-

Who is this course for?
All relevant personnel.

Is previous experience required?
You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

How will this course benefit me?
This course aims to provide you with an awareness of bloodborne pathogens, common modes of transmission, methods of prevention, and what to do if exposure occurs.

How will this course benefit my company?
By ensuring you are aware of the bloodborne pathogens, common modes of transmission, methods of prevention, and what to do if exposure occurs.

What standards are referred to in this course?
N/A

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: MTP-006
Course type: E-learning course
Duration: 120 minutes
Language: English, Norwegian
Price: GBP 120,-

Who is this course for?

This HSE Introduction course is for all personnel who require an introduction to or awareness of HSE roles, responsibilities and duties in Norway.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

Health, safety and environment (HSE) considerations are vital to every organisation. Moreover, HSE requirements in the workplace are laid down in a range of laws, regulations and guidelines.

The employer has the primary responsibility for providing a suitable, safe working environment – and for ensuring sufficient training. This course aims to provide you with the baseline knowledge to be able to manage HSE challenges in your daily work.

How will this course benefit my company?

By ensuring you have sufficient knowledge of relevant HSE requirements, laws, regulations, guidelines and best practice.

What standards are referred to in this course?

NA

Is there an assessment?

Yes

Course code: MTP-064-FT
Course type: E-learning course
Duration: 120 minutes
Language: English, Norwegian
Price: NOK 700,-

Who is this course for?

Everyone working on low voltage installations.

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

 

How will this course benefit me?

The course meets the requirements set in § 7 of the "Safety Regulations for Work and Operation of Electrical Equipment and Installations- FSE", that relevant personnel shall be given annual training and instruction in FSE. The course also provides the necessary training and instruction in first aid, focusing on electrical injuries, with the exception of the mandatory practical training in cardio-pulmonary resuscitation (CPR).

The regulations of various authorities make FSE applicable to all those working with electricity, whether on board ship, on platforms or on land. This course is suitable for all, regardless of which industry you work in.

The authorities require that training in FSE and first aid in the event of electrical accidents is undertaken at least once a year. No more than 12 months shall elapse between training courses.

 

How will this course benefit my company?

By ensuring you have the knowledge and competence to be working on low voltage installations.

 

What standards are referred to in this course?

§ 7 of the "Safety Regulations for Work and Operation of Electrical Equipment and Installations- FSE".

 

Is there an assessment?

The fast track version of the FSE course starts with a pre-test which checks the participant's knowledge of FSE. Depending on the answers given, the participant will get a course that is tailored to the level of knowledge revealed in the pre-test. The fast track version of the course is suitable for all but is particularly practical for those undertaking refresher training in FSE. 

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: MTP-055
Course type: E-learning course
Duration: 45 minutes
Language: English, Norwegian
Price: NOK 500,-

Who is this course for:
Primary target group are candidates for instructed person. Secondary target group are employees with HSE responsibilities.

Is previous experience required?
You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

How will this course benefit me?
The course covers the government requirements on theoretical training for personnel who may undertake simple operational and maintenance tasks on the electrical system.
The course focuses on preventing accidents and to be aware of the dangers of working with electricity.
The theoretical part of First Aid and instructions are covered, but it is necessary to undertake practical training both in First Aid and the work tasks covered by the instructions in relation to the electrical installation where you are to work.

How will this course benefit my company?
By ensuring you have the knowledge of the government requirements of theoretical training for personnel who may undertake simple operational and maintenance tasks on the electrical system.

What standards are referred to in this course?
Internkontrollforskriften
Forskrift om elektroforetak og kvalifikasjonskrav for arbeid knyttet til elektriske anlegg og elektrisk utstyr (FEK)

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: NI-001
Course type: E-learning course
Duration: 15 hours
Language: Norwegian / English
Price: NOK 5300,-

Obligatory working environment training for safety deputies and union officials, completed as e-learning combined with classroom training. 

The course provides basic working environment training in accordance with the main contract between The Norwegian Confederation of Trade Unions (LO) and The Confederation of Norwegian Enterprise (NHO).

 

Course Content

E-learning

Interactive exercise sequences, video clips, and animations are used to illustrate the topics.

The course provides insight into why HSE work is important, using The Working Environment Act as a tool.

Knowledge of roles and responsibilities in relation to the working environment.

Using systematic methods for improving the working environment and for solving working environment issues.

 

Classroom Training

This internal company gathering can be conducted and organised by the company itself, or in collaboration with Mintra/The Federation of Norwegian Industries. If you would like Mintra/The Federation of Norwegian Industries to conduct the training, a minimum of 10 people must be enrolled.

 

If your company would prefer to conduct the training, relating content to internal routines and conditions, Mintra will contribute with documentation and information that describe activities related to this training. 

Contact us to find a suitable implementation model!

Course code: NI-010
Course type: E-learning course
Duration: 5 hours
Language: Norwegian / English
Price: NOK 2900,-

The Working Environment Act, section 3-5, obligates employers and executives to complete HSE training. This course satisfies the requirements for HSE training for executives and managers.

The course contains the following modules: 

• A working life changing

• The Working Environment Act

• Risk Managament

• Healthy enough to work?

• Systematic HSE work

 

Course code: MTP-064
Course type: E-learning course
Duration: 120 minutes
Language: English, Norwegian
Price: GBP 60,-

Who is this course for?

This FSE High and Low Voltage Training course is suitable for everyone working on low and high voltage installations.

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course, but it is assumed that you are competent in your designated role.

 

How will this course benefit me?

The course meets the requirements set in Section 7 of the ‘Safety Regulations for Work and Operation of Electrical Equipment and Installations – FSE’ which is that all relevant personnel undertake annual training and instruction in FSE. The course also provides the necessary training and instruction in first aid, focusing on electrical injuries, with the exception of the mandatory practical training in cardiopulmonary resuscitation (CPR).

The regulations of various authorities make FSE applicable to all those working with electricity, whether on board ship, on platforms or on land. This course is suitable for all, regardless of which industry you work in.

The authorities require that training in FSE and first aid in the event of electrical accidents is undertaken at least once a year. No more than 12 months shall elapse between training courses.

 

How will this course benefit my company?

By ensuring you have the knowledge and competence to be working on low and high voltage installations.

 

What standards are referred to in this course?

• Section 7 of the ‘Safety Regulations for Work and Operation of Electrical Equipment and Installations – FSE’

• The European standard

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: MUK-160
Course type: E-learning course
Duration: 30 minutes
Language: English
Price: GBP 40,-

Who is this course for?

Personnel requiring an awareness or understanding of the change management process.

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

 

How will this course benefit me?

This course aims to provide an overview of management of change. The course focuses on the steps of the management of change process, the roles and responsibilities of personnel, and the risks involved in change management and their associated control measures.

 

How will this course benefit my company?

By ensuring you have an overview of the management of change process.

 

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: MGM-018
Course type: E-learning course
Duration: 40 minutes
Language: English
Price: NOK 600,-

Who is this course for?
All relevant personnel.

Is previous experience required?
You do not need prior knowledge or experience to complete this course.

How will this course benefit me?
This course provides drug and alcohol awareness, information on company policies, and the effects of alcohol abuse, illegal drug use, and the abuse of prescription drugs.

How will this course benefit my company?
By ensuring you have a basic understanding of the drug and alcohol awareness, information on company policies, and the effects of alcohol abuse, illegal drug use, and the abuse of prescription drugs.

What standards are referred to in this course?
N/A

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Course code: MUK-206
Course type: E-learning course
Duration: 45 minutes
Language: English (US)
Price: GBP 40,-

Who is this course for?

Personnel requiring an awareness or understanding of US best practice for protecting hearing from noise hazards.

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

 

How will this course benefit me?

This course aims to ensure that relevant personnel in the US have a common and consistent understanding of noise hazards and their effects on you.

 

How will this course benefit my company?

By ensuring you have a common and consistent approach to company and industry best practice in relation to US specific ways to protect from noise hazards.

 

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: MUK-219
Course type: E-learning course
Duration: 45 minutes
Language: English (US)
Price: GBP 40,-

Who is this course for?

Personnel requiring awareness or undertanding of LOTO in the US.

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

 

How will this course benefit me?

To ensure that relevant personnel have a common and consistent approach to industry best practice in relation to US LOTO controls.

 

How will this course benefit my company?

By ensuring you have an overview of industry best practice in relation to LOTO controls.

 

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: MUK-200
Course type: E-learning course
Duration: 45 minutes
Language: English (US)
Price: GBP 40,-

Who is this course for?

All personnel who could potentially be exposed to H2S in the workplace.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

This course aims to give offshore personnel the knowledge required to understand the hazards and controls associated with working in an environment where they could potentially be exposed to H2S.

How will this course benefit my company?

By ensuring you are aware of the hazards and controls associated with H2S exposure, which will in turn reduce incidents and accidents offshore.

What standards are referred to in this course?

Occupational Safety and Health Administration (OSHA)

US National Institute for Occupational Safety (NIOSH)

American Conference of Government Industrial Hygienists (ACGIH)

Is there an assessment?

Yes

Course code: MTP-038
Course type: E-learning course
Duration: 45 minutes
Language: English, Norwegian
Price: NOK 1100,-

Who is this course for?

All employees at all levels of the organisation.

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

 

How will this course benefit me?

Insufficient understanding of risk often leads to delayed projects, accidents and other unwanted incidents.

This course provides a basic understanding of what risk is, how it can be managed and how understanding risk helps us make better decisions.

 

How will this course benefit my company?

By ensuring you are aware and have a basic understanding of what risk is and how to manage risk. 

 

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

 

Is there an assessment?

There is no exam upon completion of this course.

Course code: MUK-210
Course type: E-learning course
Duration: 35 minutes
Language: English (US)
Price: GBP 40,-

Course Goal:

This course provides learners with an awareness of US best practice in relation to working at height and fall protection.

 

Learning Objectives:

LO1 Identify when fall protection is required

LO2 Identify the legislative and regulatory requirements for fall protection that help to control work at height

LO3 Explain the duties that are placed on employers and employees

LO4 Describe the hazards involved in working at height

LO5 Explain the importance of planning and risk assessment

LO6 Describe the hierarchy of control for managing and selecting fall protection equipment 

LO7 Identify the factors that should be considered when assessing fall protection methods

LO8 Describe the main methods of access for working at height and give examples of the different types of fall protection equipment

LO9 Describe the rules for working with ladders

LO10 Describe the rules for working with scaffolds

LO11 Explain the importance of inspecting equipment

LO12 Explain how to correctly use a safety harness

 

Hits per page