Other

Course catalogue

hits
136
Course code: MUK-216
Course type: E-learning course
Duration: 30 minutes
Language: English (US)
Price: GBP 40,-

Course Goal: 

This course aims to provide an awareness of US best practice in relation to working with Naturally Occurring Radioactive Material (NORM).

 

Learning Objectives:

LO1 Define what is meant by NORM and where it is found

LO2 Explain what is meant by ‘radioactive material’ and the difference between alpha particles, beta particles and gamma rays

LO3 Describe the hazards associated with NORM

LO4 Identify the pathways for exposure to NORM

LO5 Identify the radiation protection principles

LO6 Explain the importance of radiation monitoring

LO7 Identify control measures that can be used to minimize the risk posed by NORM

LO8 Describe the PPE that should be used when working with NORM

LO9 Explain how to limit decontamination and correctly dispose of NORM

Course code: MUK-204
Course type: E-learning course
Duration: 30 minutes
Language: English (US)
Price: GBP 40,-

Who is this course for?

Personnel requiring an awareness or understanding of US scaffolding safety.

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

 

How will this course benefit me?

This course aims to ensure that relevant personnel in the US have a common and consistent understanding of scaffolding safety.

 

How will this course benefit my company?

By ensuring you have a common and consistent approach to company and industry best practice in relation to US scaffolding safety.

 

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: MUK-210-FT
Course type: E-learning course
Duration: 35 minutes
Language: English (US)
Price: GBP 40,-

Course Goal: 

This course provides learners with an awareness of US best practice in relation to working at height and fall protection.

 

Learning Objectives:

 

LO1 Identify when fall protection is required

LO2 Identify the legislative and regulatory requirements for fall protection that help to control work at height

LO3 Explain the duties that are placed on employers and employees

LO4 Describe the hazards involved in working at height

LO5 Explain the importance of planning and risk assessment

LO6 Describe the hierarchy of control for managing and selecting fall protection equipment 

LO7 Identify the factors that should be considered when assessing fall protection methods

LO8 Describe the main methods of access for working at height and give examples of the different types of fall protection equipment

LO9 Describe the rules for working with ladders

LO10 Describe the rules for working with scaffolds

LO11 Explain the importance of inspecting equipment

LO12 Explain how to correctly use a safety harness

Course code: MUK-223
Course type: E-learning course
Duration: 45 minutes
Language: English (US)
Price: GBP 40,-

Who is this course for?

All personnel involved in forklift activities.

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

 

How will this course benefit me?

This course aims to provide an overview of the hazards specific to forklift activities. 

 

How will this course benefit my company?

By ensuring you have an overview of the hazards specific to forklift activities. 

 

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: MUK-218
Course type: E-learning course
Duration: 30 minutes
Language: English (US)
Price: GBP 40,-

Course Goal:

This course aims to  provide learners with an overview of US best practice in relation to working with hand and power tools.

This course aims to provide an understanding of the potential hazards associated with the use of hand tools and power tools, as well as the safety precautions required to prevent those hazards from occurring.

 

Learning Objectives:

LO1 Identify the general hazards and control measures associated with hand and power tools

LO2 Identify specific hazards associated with hand tools

LO3 Give an overview of general power tool safety precautions

LO4 Explain how guards provide protection to operators

LO5 Give examples of tools that must be equipped with a momentary switch

LO6 Identify specific hazards and control measures related to the use of electric tools

LO7 Identify the proper procedures to follow when using a grinder

LO8 Identify specific hazards and control measures related to the use of pneumatic tools

LO9 Identify specific hazards and control measures related to the use of powder-actuated tools

LO10 Identify specific hazards and control measures related to the use of hydraulic jacks

 

Course code: MUK-252
Course type: E-learning course
Duration: 20 minutes
Language: English
Price: NOK 250,-

Who is this course for?
All personnel.

Is previous experience required?
You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

How will this course benefit me?
This course aims to provide personnel with a guide on the preventative and protective measures that may be put in place at workplaces following personnel return

How will this course benefit my company?
By ensuring you have an overview of the preventative and protective measures that may be put in place at workplaces following personnel return

What standards are referred to in this course?
N/A

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: MUK-208
Course type: E-learning course
Duration: 20 minutes
Language: English (US)
Price: GBP 40,-

Who is this course for?

Personnel requiring an awareness or understanding of US respiritory protection and RPE.

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

 

How will this course benefit me?

This course aims to ensure that relevant personnel in the US have a common and consistent understanding of RPE.

 

How will this course benefit my company?

By ensuring you have a common and consistent approach to company and industry best practice in relation to US RPE.

 

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: EBA-004
Course type: E-learning course
Duration: 1 hour 40 minutes
Language: Norwegian, English, Po ...
Price: NOK 650,-

The course provides knowledge about the structure, operation, applications and usage, maintenance and monitoring of the appropriate tool. The training provides knowledge about the requirements for safe use and operation stipulated in regulations and instructions.

Along with a practical review of the tools, the course meets the requirements for documented training in hazardous work equipment in Regulations concerning the Performance of Work.

The course covers the following subjects:

- Introduction to general HSE
- Angle grinder
- Hammer drills, jackhammers and combihammers
- Powder actuated gun
- Nail gun
- Saws with blade (includes table saw, crosscut and miter Saw, circular saw, jigsaw and reciprocating saw)
- Chain saw

 

Course code: APP-010
Course type: E-learning course
Duration: 3 hours
Language: Polish
Price: NOK 650,-

Section 7 of the “Safety Regulations for Work and Operation of Electrical Equipment and Installations” (FSE) sets requirements for yearly FSE training for relevant personnel. This e-learning course takes you through the requirements of the regulations and gives you training and instruction in FSE. The course focuses on safety for work on low voltage installations offshore.

 

The course also provides first-aid instruction and training. CPR training must be completed separately.

 

In accordance with section 7 of FSE, FSE and and first-aid training must be completed at least once a year. In order to meet the requirement for being able to provide first aid in the event of electrical accidents, you also need to complete yearly practical training in CPR (mouth-to-mouth and heart compressions).

 

This course addresses a variety of issues and covers how to prevent electrical accidents, routines in the event of accidents, and theoretical first aid, and aims to help prevent harm to people, equipment, and installations.

Course code: MTP-056
Course type: E-learning course
Duration: 20 minutes
Language: Norwegian / English
Price: NOK 600,-

Who is this course for?

All employees at all levels of the organisation who require an awareness of steps to take in the event of armed attack.

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

 

How will this course benefit me?

The main idea behind the course is that knowledge about and reflection on what to do makes us feel more confident and able to make informed choices.  In a public area or at work, are you aware of what the premises look like, and how you can evacuate if a situation should occur? In order of priority you should act in this way; Run, Hide, Fight!

 

The course describes these guidelines in more details and also allows the user to reflect upon various aspects of an armed attack.

 

How will this course benefit my company?

By ensuring you are aware of the priorities should an armed attack occur.

 

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

 

Is there an assessment?

There is no exam upon completion of this course.

Course code: TK-023
Course type: E-learning course
Duration: 1 hour 30 minutes
Language: Norwegian
Price: NOK 490,-

Norske myndigheter pålegger arbeidsgiver å sikre at alle arbeidstakere har fått dokumentert opplæring i betjening av alt arbeidsutstyr som anses som farlig, eller krever særlig forsiktighet ved bruk. («Forskrift om utførelse av arbeid» nr. 1357, § 10-2 Krav om dokumentert sikkerhetsopplæring ved bruk av arbeidsutstyr.) Kurset gir en grunnleggende innføring i sikker bruk av farlig småverktøy som eksempelvis: vinkelslipere, kappsag, boltepistol og spikerpistol. Når kurset er bestått kan man laste ned kursbevis umiddelbart.


Hensikt:

Gi kursdeltakerne økt kunnskap og bevisstgjøring av sikkerhetstiltak, for å unngå personskader og ulykker på arbeidsplassen.


Innhold:

Følgende emner blir bl.a. gjennomgått:

– Oppbygging

– Betjening

– Brukeregenskaper

– Bruksområder

– Vedlikehold

– Sikker bruk og sikkerhetsregler

– Holdninger og motivasjon

– Lover og forskrifter

 

Hver leksjon inneholder en video.

 

This course is only available in Norwegian.

Course code: MUK-205
Course type: E-learning course
Duration: 30 minutes
Language: English (US)
Price: GBP 40,-

Course goal:

This course aims to provide learners with an awareness of US best practice in relation to manual handling activities.

To increase learners’ awareness of the importance of safe manual handling operations and the risks involved with manual handling. The course also aims to give an overview of the OSHA requirements for the correct handling techniques for safe lifting, and for the pushing and pulling of loads.

 

Learning Objectives

 LO1 Define the term ‘manual handling’ and explain the importance of safe manual handling operations 

LO2 Identify the types of injuries that may result from improper manual handling operations 

LO3 Identify safe work practices in relation to manual handling operations

LO4 Describe the duties that are placed on employers and individual personnel in relation to manual handling operations

LO5 Explain the importance of risk assessing manual handling operations 

LO6 Identify the factors to consider when assessing manual handling operations and identify ways of reducing the risks of injury 

LO7 Describe good handling techniques for safe lifting

LO8 Describe good handling techniques for pushing and pulling loads

LO9 Explain the training requirements associated with manual handling operations

 

Course code: MUK-221
Course type: E-learning course
Duration: 45 minutes
Language: English (US)
Price: GBP 40,-

Who is this course for?

All personnel involved in warehouse safety operations in the workplace.

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

 

How will this course benefit me?

This course aims to identify the hazards specific to warehousing and provide advice on how to avoid these hazards.

 

How will this course benefit my company?

By ensuring you are able to identify the hazards specific to warehousing and provide advice on how to avoid these hazards.

 

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: EXT-005
Course type: E-learning course
Duration: 5-hour e-learning
Language: English, Norwegian
Price: NOK 6200,-

The course gives you a basic understanding of the principles of intrinsically safe loops (IS) in potentially explosive areas.

After completing the course, the candidate will have acquired the necessary knowledge about the design of intrinsically safe (IS), choice of equipment, inspection and maintenance in potentially explosive areas.

Our aim is to ensure that the employees are motivated to work safely and securely.

The course lasts 5 hours and the course certificate is valid for 5 years

The e-learning course can also be used as a refresher after 5 years


Themes:

• Understand the general principles for the type of specific protection and correct marking of components approved in intrinsically safe systems (IS)

• Current standard for Exi

• Construction and assessment of intrinsically safe equipment

• Assessment and concrete use of “simple apparatus app”

• Be able to choose and install the correct Exi equipment in hazardous areas according to the standards IEC 60079-14 and 60079-25

• How to work safely with IS

• Competence requirements for performing work on Exi installations

• How to verify and calculate an Exi circuit

 

• Know where to find and how to read relevant standards, data sheets, product sheets and other relevant literature

Course code: MTP-065-FT
Course type: E-learning course
Duration: 2 hours
Language: English, Norwegian
Price: NOK 700,-

Who is this course for?

Everyone working on high voltage installations.

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

 

How will this course benefit me?

The course meets the requirements set in § 7 of the ""Safety Regulations for Work and Operation of Electrical Equipment and Installations- FSE"", that relevant personnel shall be given annual training and instruction in FSE. The course also provides the necessary training and instruction in first aid, focusing on electrical injuries, with the exception of the mandatory practical training in cardio-pulmonary resuscitation (CPR).

The regulations of various authorities make FSE applicable to all those working with electricity, whether on board ship, on platforms or on land. This course is suitable for all, regardless of which industry you work in. 

 

The authorities require that training in FSE and first aid in the event of electrical accidents is undertaken at least once a year. No more than 12 months shall elapse between training courses.

 

How will this course benefit my company?

By ensuring you have the knowledge and competence to be working on high voltage installations.

 

What standards are referred to in this course?

 § 7 of the ""Safety Regulations for Work and Operation of Electrical Equipment and Installations- FSE""

 

Is there an assessment?

The fast track version of the FSE course starts with a pre-test which checks the participant's knowledge of FSE. Depending on the answers given, the participant will get a course that is tailored to the level of knowledge revealed in the pre-test. The fast track version of the course is suitable for all but is particularly practical for those undertaking refresher training in FSE. 

 

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

 

Course code: TK-008-NO
Course type: E-learning course
Duration: 2 hours
Language: Norwegian
Price: NOK 990,-

Norwegian authorities demand that employees who need to use fall protection equipment in their line of work have been given sufficient training in the use of this equipment. It is the employer’s responsibility to ensure the employees have received this training. The course provides basic theoretical knowledge of fall protection measures and equipment.

Objective:
The course gives insights into fall theory and common fall protection methods and equipment. It raises safety awareness and helps prevent accidents and injuries at the workplace.

Themes discussed:
- Why falling accidents happen
- Laws and regulations
- Risk assessment
- Safe job analysis
- Equipment choices
- Rescue plan

 

Every lesson contains a video presentation

Course code: SAR-001
Course type: E-learning course
Duration: 15 minutes
Language: Norwegian
Price: NOK 600,-

The course is designed for people who already know how to declare on paper and who want to learn how it is done electronically.

Course code: NI-029
Course type: E-learning course
Duration: 1 hour
Language: Norwegian
Price: NOK 500,-

E-lærings kurset er ment å gi en så enkel som mulig veiledning for bruk av åndedrettsvern som de fleste norske virksomheter der støv er en utfordring, kan forholde seg til.

Hensikt:

Helseeffektene av støveksponering får stadig mer oppmerksomhet. Alt støv i store konsentrasjoner representerer en belastning på lungene. Støv i arbeidsatmosfæren må reduseres i mange bransjer. Selv om de yrkeshygieniske forhold bedres, vil det alltid være behov for bruk av åndedrettsvern ved arbeidsoperasjoner der eksponeringen er høy.

Effekten av bruken av åndedrettsvern avhenger av en rekke faktorer, og det er i dag mye flott utstyr å velge mellom, og det er mye kunnskap på området. Men for de fleste er det en utfordring å tilegne seg dette. Fagfeltet oppleves som en jungel, der man ikke helt vet hvor man skal lete.

 

Kurset gir bedriften et grunnlag for å vurdere utfordringer og tiltak.

Innhold:

• Hva er støv?
• Støv og helseeffekter
• Valg av støvmaske
• Valg av støvfilter
• Tilpassing av maska
• Vedlikehold av maska

 

This course is only available in Norwegian.

Course code: APP-008
Course type: E-learning course
Duration: 3 hours
Language: Polish
Price: NOK 650,-

Section 7 of the “Safety Regulations for Work and Operation of Electrical Equipment and Installations” (FSE) sets requirements for yearly FSE training for relevant personnel. This e-learning course takes you through the requirements of the regulations and gives you training and instruction in FSE. The course focuses on safety for work on low voltage installations.

 

Course code: OMH-002
Course type: E-learning course
Duration: 1,5 hours
Language: Norwegian
Price: NOK 1600,-

Course for updating relevant knowledge regarding “Brannforebyggende elkontroll bolig – NEK 405-2».

The course can be used as exam preparation.

Electrical systems and electrical equipment shall be safe in use and the conditions for it is that all the safety measures required by the legislation is in place. However, the electrical systems are influenced during use, physical damage and aging. This affects the need for maintenance, replacements and upgrades. A control of the electrical systems according to NEK 405-2 will reveal the state of the electrical system and give the owner a basis for action.

The course deals with:
- Information on certification and qualification
- Fire theory and statistics
- Legislation, regulations and reference level
- Time Typical Structures
- Current regulations
- Checkpoints, information points and procedure
- Fire Theory

Hits per page