Course catalogue

Who is this course for?

Personnel requiring an awareness or understanding of sealed sources of radiation in the US.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to ensure that relevant personnel in the US have a common and consistent understanding of sealed radiation sources.

How will this course benefit my company?

By ensuring you have a common and consistent approach to company and industry best practice in relation to US operations involving sealed radiation sources.

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for:
Anyone wanting to take the SRC/VHR-exam.

Is previous experience required?
You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

How will this course benefit me?
To use VHF you must have a VHF / SRC certificate. With this course you will learn the whole curriculum in a simple and easily understandable way.

How will this course benefit my company?
By ensuring you have the competence to use VHF.

What standards are referred to in this course?
Lovdata - www.lovdata.no
Petroleum Safety Authority - www.psa.no

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is the course for?

This eLearning course is aimed at individuals who work offshore, in any role, anywhere in the world.

Is previous experience required?

The course is designed for existing workers in the oil and gas industry. Completion of this course awards an IMIST certificate valid for four years, after which you will need to sit the course again to refresh your knowledge and earn a new certificate.

How will the course benefit me?

The offshore working environment is home to many hazards, which means that it is vital for everyone who goes offshore to have the same baseline level of safety knowledge. This course has been created with OPITO to set a global safety standard by applying a consistent level of safety awareness across nine safety critical areas and is applicable.

The knowledge gained in this course will help you to stay safe in your day-to-day activities offshore. It will also outline some of the systems and procedures in place to manage everyday operations offshore.

How will the course benefit my company?

By ensuring that your safety knowledge is at or above the baseline level, your company can rest assured that you are able to work offshore safety and in compliance with regulations and company procedures. Increased safety knowledge helps to prevent incidents and makes your working environment a safer place.

What standards are referenced in the course?

This course is written based on the OPITO standard International Minimum Industry Safety Training Standard (IMIST) (5312). As a global standard, the course is not written to meet any specific regional legislation but references industry best practices and standard operating procedures throughout.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 100%. 

The course starts with an optional pre-assessment that checks your existing knowledge of the course topics. The course will restructure so that it only contains the content needed to address the gaps in your knowledge.

Please find pre-course information and learning outcomes here: 

https://mintra.com/implementing-maintaining-opito-standards-policy

The NORSOK R-003 standard, Safe Use of Lifting Equipment is the industry standard for operating lifting equipment on the Norwegian continental shelf.

The course, “Safe Use of Offshore Cranes”, builds on NORSOK R-003 and is an important means for satisfying governmental regulations for maintaining and verifying competence in the safe use of lifting equipment.

The course focuses ongood work practices, as well as good attitudes and understanding of safety for crane operations, in accordance with the NORSOK R-003 standard.

This course gives an introduction to the new version of R-003 which was launched in 2017.

The course contains references to the 2004 version of R-003, but the course in its entirety will be updated when the new version of R-003 is launched with an updated Appendix B.

Course Content:

-Introduction

-Rolls and responsibilities

-Planning and supervising

-Communication

-Supply vessels

-Load bearers

-Chemicals

-Lifting to and from the rig floor

-Using guy wires

-Lifting drilling pipes and casings

-Assembly and disassembly lifts

-Lifting scaffolding material and planks

-Operating blind

-Personnel lifts

Who is this course for?

Personnel requiring an awareness or understanding of US fire extinguishers.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to ensure that relevant personnel in the US have a common and consistent understanding of portable fire extinguishers.

How will this course benefit my company?

By ensuring you have a common and consistent approach to company and industry best practice in relation to US portable fire extinguishers.

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

All personnel who are involved in offshore drilling.

Is previous experience required?

No previous experience is required to complete this course. 

How will this course benefit me?

This course aims to provide an overview of well control and the systems used in the process and is based upon the International Well Control Forum (IWCF) Level 1 Syllabus.

How will this course benefit my company?

This course will benefit companies by ensuring personnel have an understanding of well control and the relevant systems.

What standards are referred to in this course?

No standards or regulations are referenced in this course.

Is there an assessment?

Yes

Course goal: This course aims to increase learners’ awareness of the risks, and consequences, of slips, trips and falls in the workplace and the control measures and steps that can be taken to reduce the risk of slips, trips and falls, based on industry best practice.

Target Audience: All onshore and offshore personnel

Learning Objectives

LO1 Outline the extent of the problem of slips, trips and falls at work

LO2 Identify the causes of slips, trips and falls

LO3 Describe the importance of following regulatory requirements to help reduce the risk of slips, trips and falls occurring

LO4 Explain the duties of employers in preventing slips, trips and falls in the workplace

LO5 Explain the hierarchy of controls in preventing, and reducing, the risk of slips

LO6 Explain the actions that can be taken to prevent and reduce the risk of trips

LO7 Explain the responsibilities of employees in preventing slips, trips and falls

Who is this course for?
Offshore Marine Technicians

Is previous experience required?
You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

How will this course benefit me?
This course provides an introduction to radar systems and their use within the Oil and Gas Industry.

How will this course benefit my company?
By ensuring you are aware of the how phase behaviour and multiphase flow regimes can impact on hydrocarbon delivery.

What standards are referred to in this course?
N/A

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is the course for?

This course is aimed at individuals working in industrial sectors whose activities can impact the environment.

Is previous experience required?

You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role.

How will the course benefit me?

This course will give you a basic understanding of environmental ‘aspects’ and ‘impacts’ and explain the purpose of an Environmental Management System (EMS).

The knowledge gained in this course will help you to stay in compliance with legislative requirements. It will also explain how you can play your part in improving environmental performance.

How will the course benefit my company?

By ensuring you are fully aware of the role of ISO 14001 in environmental management, you contribute to continual improvement in environmental performance, as well as ensuring that you operate in compliance with relevant regulations and legislation.

What standards are referenced in the course?

ISO 14001

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Stress is our body's way of responding to physical, emotional, or mental demands. Although typically associated with negative circumstances, stress can be caused by both good and bad experiences. Our bodies react to stress by releasing chemicals into the blood to give us energy and strength to handle the situation. This evolutionary reaction can be a good thing when stress is caused by real physical danger; however, this survival response can wreak havoc if it builds up without a proper outlet. This interactive online course discusses signs and symptoms of stress, and explains the physical and emotional effects of built up stress, such as pain and anxiety. The course also describes stress management techniques, treatment options, and lifestyle changes to help alleviate stress.

Who is this course for?
All relevant personnel.

Is previous experience required?
You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

How will this course benefit me?
This course aims to provide personnel with an overview of how the Working Time Regulations impact on their working hours and the importance of effectively managing and assess the risks posed by fatigue in the workplace.

How will this course benefit my company?
By ensuring you have an overview of how the Working Time Regulations impact on their working hours and the importance of effectively managing and assess the risks posed by fatigue in the workplace.

What standards are referred to in this course?
N/A

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course Goal:  This course aims to increase learners’ awareness of the risks, and consequences, of slips, trips and falls in the workplace and the control measures and steps that can be taken to reduce the risk of slips, trips and falls, based on industry best practice.

Is there an assessment? 

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Learning Objectives

LO1 Outline the extent of the problem of slips, trips and falls at work

LO2 Identify the causes of slips, trips and falls

LO3 Describe the importance of following regulatory requirements to help reduce the risk of slips, trips and falls occurring

LO4 Explain the duties of employers in preventing slips, trips and falls in the workplace

LO5 Explain the hierarchy of controls in preventing, and reducing, the risk of slips

LO6 Explain the actions that can be taken to prevent and reduce the risk of trips

LO7 Explain the responsibilities of employees in preventing slips, trips and falls

Who is the course for?

All personnel who work in a role that may put them at risk of a hand or body injury.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

This course will provide learners with an introduction on how to prevent hand and body injuries in the workplace.

How will the course benefit my company?

This course to ensure personnel have the knowledge of how to protect their hands and body from injury in the workplace, by following safety measures and understanding procedures.

What standards are referenced in the course?

Reporting of Injuries, Diseases and Dangerous Occurrences Regulations (RIDDOR)

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?
All managers.

Is previous experience required?
You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

How will this course benefit me?
This course aims to provide managers with a guide on how to safely return their teams to the workplace

How will this course benefit my company?
By ensuring you have a guide on how to safely return their teams to the workplace

What standards are referred to in this course?
N/A

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

It has become increasingly clear that social media is not just a fad. It is instead, not only a massive change in the way we socialize with others in a personal setting, but also the biggest shift in how we conduct business since the arrival of the Internet. Social media is quickly altering every aspect of corporate operations, such as hiring practices, training, marketing, and even risk management.   The purpose of this course is to introduce you to social media, explore how we use social media personally vs. social media use in a business setting, how its use continues to evolve in the workplace, the benefits of social media, and of course the risks it can present to you personally and to companies.

Review of the two pages from where one can register hours in OCS Self Service – Hours per week and Timesheet. Manual registration, hour generation, project pinning and approving hours. Manager’s approval of hours for employees. 

Who is this course for?

All personnel involved in trenching and excavation activities.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to provide an overview of the hazards specific to trenching and excavation activities. 

How will this course benefit my company?

By ensuring you have an overview of the hazards specific to trenching and excavation activities. 

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

All personnel involved in welding operations in the workplace in the US.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to provide an overview of OSHA safe working practices in relation to welding operations.

How will this course benefit my company?

By ensuring you have an overview of OSHA safe working practices in relation to welding operations.

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course Goal: This course aims to provide an overview of management of change. The course focuses on the steps of the management of change process, the roles and responsibilities of personnel, and the risks involved in change management and their associated control measures.

Learning Objectives:

LO1 Explain why the effective management of change is an essential part of operations in the Oil and Gas Industry

LO2 Define ‘change’

LO3 Describe the key stages in the management of change process 

LO4 Identify the key roles and responsibilities involved in effective management of change 

LO5 Identify the risks associated with management of change

LO6 Explain how the risks associated with management of change can be managed

Course Goal: This course is designed to enable all personnel to have a common and consistent approach to both company and industry best practice in relation to managing produced water.

This course contains 7 sections:

Section 1: Introduction to the Oilfield Water Cycle 

Section 2: Production Streams and Disposal Management 

Section 3: Produced Water Discharges - Environmental and Regulatory Requirements

Section 4: Produced Water Treatment Principles

Section 5: Produced Water Treatment Equipment

Section 6: Produced Water Chemical Management 

Section 7: Oilfield Water Cycle Summary