Oil and Gas

Course catalogue

hits
86

Forklift with practical training - Module 1.1, 2.2, 3.2, 4.2 and practical ...

Course code: KOL-009
Course type: Classroom course
Duration: 42 hours
Language: Norwegian
Price: Not set

Hensikten med opplæringen er å gi truckførere allsidig praktisk opplæring og øvelse i sikker bruk av truck, slik at ulykker i forbindelse med bruken unngås. Opplæringen skal gi fører så gode kjøreferdigheter at vedkommende selvstendig på en sikker måte skal kunne gjennomføre oppdrag med truck.

Truckfører må imidlertid gjennomføre typeopplæring på den trucken som til enhver tid benyttes i tillegg til sertifisert sikkerhetsopplæring. Opplæringen avsluttes med en praktisk prøve som innbefatter kontroll og bruk av aktuelle trucker.

Bestått praktisk prøve på aktuelle trucker vil være grunnlag for utstedelse av kompetansebevis for fører av truck

Modul 1.1 (8 timer) Arbeidsmiljø, ansvar og konsekvenser

Modul 2.2 (14 timer) Truck 

Modul 3.2 (6 timer) Praktisk bruk

Modul 4.2 Bedriftsoppl. - 20 timer Oppl.virksomhet-14 timer

 

The course is only available in Norwegian.

 

Course code: EXT-011
Course type: Classroom course
Duration: 1 day
Language: Norwegian
Price: From NOK 6000,-

This is a course for electrical installations in potentially explosive areas.

Our goal is to make sure that employees are motivated to work safely and securely.

 

Topics:

• Understand the general principles of type of specific protection and correct labeling of components approved in intrinsically safe facility (IS)

• Current Exi Standard

• Could choose to install the correct Exi equipment in hazardous areas accordance with IEC 60079-14 standards and 60079-25

• How to work safely with IS

• Requirements for competence to perform work on Exi installations

• How to verify and calculate an Exi circuit

 

Standards:

• NEK EN 60079-11

• NEK EN 60079-14

• NEK EN 60079-25

• IEC 60079-11

• IEC 60079-14

• IEC 60079-25

 

This course is only available in Norwegian.

Course code: VTK-005
Course type: Classroom course
Duration: 1 day
Language: Norwegian
Price: From NOK 3900,-

Only in Norwegian

Hovedformålet med kurset er å skape gode holdninger til bruk av riktig verneutstyr, og forhindre at liv og helse går tapt.


Etter kurset skal deltakerne kunne:
- Kjenne til virkemåte og oppbygningen til ulike typer pusteluftkompressorer og pusteluftsystem
- Kjenne til hvilke bestanddeler sikker pusteluft inneholder
- Bruke åndedrettsvern på en trygg og sikker måte
- Utføre daglig renhold/vedlikehold på hodesett og bæresele
- Kjennskap til forskrift 706, kap. 10 og standardene NS-EN-14593, NS-EN 14594 og EN 12021
- Kjenne til kvalitetssikring av pusteluft, målemetoder og utstyr
- Kjenne til hvilke flasker, seler og hodesett som brukes til pusteluft
- Kjenne til farer og utfordringer ved arbeid i miljøer uten sikker pusteluft, og vite hva han/hun selv kan gjøre for å ivareta egen sikkerhet

Kurset inneholder oppgaver og praktiske øvelser.

Course code: WEC-005
Course type: Classroom course
Duration: 16 hours
Language: Norwegian
Price: From NOK 4900,-

Hovedmålet med kurset er å gi deltakerne generelle kunnskaper og ferdigheter som «kompetent person» i periodisk kontroll av ass. fallsikringsutstyr.

Course code: WEC-012
Course type: Classroom course
Duration: 40 hours
Language: Norwegian
Price: From NOK 10910,-

Hovedmålet med kurset er at den som gis opplæring tilegner seg tilstrekkelige kunnskaper om sikker bruk av traverskraner, slik at ulykker ved bruk unngås.

Regelverksreferanse:

Modul 2.7 - 3.7 - 4.7

Course code: KOL-023
Course type: Classroom course
Duration: 1 day
Language: Norwegian
Price: From NOK 5200,-

Kurset gir en grunnleggende innføring i høytrykkslanger og kuplinger og er et naturlig grunnlag for drifts- og vedlikeholdspersonell som skal foreta inspeksjon og vedlikehold på høytrykksutstyr der slanger inngår som kritiske faktorer i systemet.

Kunne utføre forebyggende inspeksjoner og vedlikehold i henhold til etablerte prosedyrer og leverandørens bruksanvisninger, kunne registrere uregelmessigheter som f.eks høy temperatur, lekkasjer i slanger og kuplinger.

Hensikt:

Etter kurset skal deltagerne ha tilegnet seg kunnskap om høytrykkslanger og kuplinger for å kunne foreta visuell inspeksjon og kontroll for å ivareta sikkerheten, avdekke eventuelle lekkasjer slik at uønskede hendelser ikke oppstår.

Innhold:

Standarder og retningslinjer ( TR 1803 )

Merking og dokumentajon 

Sikkerhetskrav / HMS ved bruk av slanger og kuplinger 

Tabeller for slanger og kuplinger med oppbygning og forståelse 

Inspeksjon og kontroll av slanger

Definisjoner

Bruk av Hose, Dats Sheet

Vedlikeholdskonsept for slanger og kuplinger

Visuel inspeksjon. Gjenger, kuplinger og slanger

 Feil- og degraderingsmekanismer

 Slangelære inkl. Installasjonsgeometri

 Håndtering og oppbevaring av slanger


This course is only available in Norwegian.

Course code: ALT-008
Course type: Classroom course
Duration: 5 days
Language: Norwegian - Exam avail ...
Price: From NOK 17300,-

This course includes all subjects needed to prepare candidates for the rotary drilling well control exam, surface and subsea BOP stack on driller level (Level 3).

This course includes all subjects needed to prepare candidates for the rotary drilling well control exam, surface and subsea BOP stack at supervisor level (Level 4).

A printed course manual and exercise book is provided for all attendees. The IWCF exam is included in the course.

The course has been made on basis of the recommendations for enhancements to well control training, issued by the International Association of Oil & Gas Producers (OGP).

Course Content

- Kick prevention

- Shut in procedures

- Well control methods

- Kill sheet calculations

- Practical simulator training

- Circulation methods

- Practical simulator assessment

- IWCF written exam on the last day (Friday)

Please note! The course is in Norwegian, however you have the option to select the exam language to be English

Course code: STQ-014
Course type: Classroom course
Duration: 3 days
Language: Norwegian
Price: From NOK 7990,-

Objective: The purpose of the training is to provide the prospective winch operator with a good theoretical basic training in the safe use of winches with associated equipment.


The training gives participants good insight into the principles of electric, pneumatic and hydraulically driven winches' design, operation, use and maintenance, so that accidents in connection with winch operations are avoided.


Content:

• Introduction

• Construction and operation

• Name of components

• Certification, marking

• Coil devices, safety equipment

• General safety rules and emergency procedures

• Correct and incorrect use of winches

• Restrictions on use

• Inspection, maintenance and disposal rules for winches, wire ropes, blocks, etc.

• Theoretical exam

Course code: GWO-002
Course type: Classroom course
Duration: 16 hours
Language: Norwegian
Price: From NOK 7920,-

Upon completion of the Global Wind Organization (GWO) Basic Safety Training (BST), delegates will have awareness of the dangers that arise when working in the wind industry and how to control and reduce these dangers.

 

The course covers the requirements for training of personnel and refresher courses both onshore and offshore wind in accordance with:

 

- Global Wind Organization (GWO)

- Labor Inspection (Regulations)

 

Competence for "Working at heights" must be maintained in accordance with. guideline in the GWO standard. It shall be conducted refresher training every 2 years.

Course code: TK-001
Course type: Classroom course
Duration: 1 day
Language: Norwegian
Price: From NOK 3500,-

Section 3-5 of the Working Environment Act requires every organisation’s most senior manager to be able to document training in HSE work. This obligation is personal and may not be delegated, and the completed training must be documented in writing.
The HSE course for managers provides an introduction to the most important aspects of the HSE work, and is undertaken in accordance with the Norwegian Labour Inspection Authority’s guidelines for this type of training. A course certificate is issued upon completion of the course in order to fulfil the written documentation requirement.


The following topics are covered in the HSE course for managers:
– Introduction to the content and structure of the Working Environment Act
– Information about the Working Environment Act’s regulations
– Roles in the HSE work
– Working environment requirements
– Physical and psychosocial working environment
– How to establish, implement and maintain an HSE system at the workplace

Anleggsmaskin - Modul 1.1, 2.1 og 3.1

Course code: KOL-016
Course type: Classroom course
Duration: 40 hours
Language: Norwegian
Price: Not set

Kurset starter med fellesteori som er en grunnleggende innføring i aktuelle lover og forskrifter og en grunnleggende innføring i sikker bruk av arbeidsutstyr. Fagdelen vil gi eleven en god teoretisk grunnopplæring i sikker bruk av masseforflyttingsmaskiner samt en god innsikt i oppbygging, virkemåte, vedlikehold og bruk.

Eleven skal gjennomføre teorimodul 1.1 (8 timer), modul 2.1 (24 timer) og  3.1 (8 timer). Dette skal gi førerne en god generell grunnopplæring i sikker bruk og praktisk forståelse for prinsippene for masseforflytningsmaskiner.

Kurset gjennomføres over 5 dager, og avsluttes med en teoretisk prøve.

Etter bestått teoretisk prøve og gjennomført grunnleggende praktisk bruk modul 3.1 + praksiskjøring 32 timer, kan praktisk prøve gjennomføres. Bestått praktisk prøve vil være grunnlag for utstedelse av kompetansebevis for fører av masseforflyttingsmaskin i valgt klasse.

 

Kursinnhold

- Konstruksjon

- Oppbygging

- Betjening

- Bruksegenskaper

- Bruksområder

- Sikkerhetsutstyr

- Viktige kontrollpunkter

- Vedlikehold


This course in only available in Norwegian.

Course code: WEC-010
Course type: Classroom course
Duration: 40 hours
Language: Norwegian
Price: From NOK 12170,-

Hovedmålet med kurset er at den som gis opplæring tilegner seg tilstrekkelige kunnskaper om sikker bruk av personløftere, slik at ulykker ved bruk unngås.

Regelverksreferanse:

 

F-2699 Statoil rev.

Course code: HYT-003
Course type: Classroom course
Duration: 2 days
Language: Norwegian
Price: From NOK 5800,-

The course is in accordance with NS-EN 1591-4 and undergoes the same course content as an ordinary four-day course but without the use of hydraulic torque tool and tensioning tools.

The use of a mechanical torque wrench is the main focus but also a review of procedures, flanges, gaskets, practical tasks and more.

The course ends with a theoretical and practical exam. If passed, the approval is valid for 5 years.

Courses are conducted in Stavanger or Bergen
and is carried out on request.

Course price NOK 5300, - pr. participant.

Course code: GWO-007
Course type: Classroom course
Duration: 8 hours
Language: Norwegian
Price: From NOK 6990,-

Hensikt: Grunnleggende overlevelsestrening for offshore vindindustri. 

Ved gjennomføring av Global Wind Organization (GWO) Basic Safety Training (BST) vil delegatene ha en bevissthet om farene som oppstår når de arbeider i vind-industrien og hvordan man kontrollerer og reduserer disse farene.

Kursdeltakerne vil få (repetert) kunnskap og ferdigheter til å anerkjenne fordeler og begrensninger knyttet til livreddende utstyr og PVU samt korrekt bruk av dette i forbindelse med offshore vind. 

Hensikten med kurset er å gi deltakerne kunnskaper/oppfriskning om livreddende utstyr, GMDSS og SAR utstyr, hvordan en kollektivt kan øke sjansen til overlevelse i en nødsituasjon, hvordan entre og forlate vindturbiner, samt evakuering i nødsituasjoner. 

Kurset dekker krav til opplæring av personell og repetisjonskurs både land- og havvind iht:

- Global Wind Organization (GWO)

- Arbeidstilsynet (Forskrifter)


Kompetanse for «Sea Survival» skal vedlikeholdes iht. retningslinje i GWO standarden. Det skal gjennomføres repetisjonskurs hvert 2. år.


This course is only available in Norwegian.

Course code: STQ-012
Course type: Classroom course
Duration: 1 day
Language: Norwegian / English
Price: From NOK 1990,-

Objective: The purpose of the training is to provide users of work equipment mentioned in § 10-1 and 10-3 in «Regulations on the performance of work» (no. 1357), a good general basic training in the safe use of work equipment, so that accidents and accidents in connection with use is avoided.

The authorities set requirements for basic safety certification of persons who are to drive forklifts, mass transfer machines and cranes. The requirements include both theoretical and practical training. To complete the common theory, one must take and pass a theoretical exam.

Module 1.1 Working environment, responsibilities and consequences are common to machine, forklift and crane. If you can document that you have module 1.1 from before that is not older than 3 years, you can start right on module 2.3.

Content:

- Laws and regulations
- Working environment, responsibilities, and consequences
- Environmental
- Safety regulations
- Dangerous goods, marking and handling

 

Course code: STQ-015
Course type: Classroom course
Duration: 16 hours (2 days)
Language: Norwegian
Price: From NOK 7990,-

Hensikt:

Målsetting med opplæring er at den som gis opplæring tilegner seg tilstrekkelig kunnskap om metoder for å lede og veilede løfteoperasjoner slik at de blir forskriftmessig utført.

Opplæringen gir også kunnskap om farer forbundet med løfteoperasjoner samt bruk av risikokartlegging.

Kurset gir deltakere kunnskap til å kunne utøve overordnet operasjonell ledelse av løfteoperasjoner. Med det menes å kunne planlegge, risikokartlegge og evaluere, samt forebygge ulykker. Videre vil deltaker også tilegne seg kunnskaper om å gjøre rede for materialhåndteringsplan, oppbevaring og bruk av utstyr.


Målsetting med opplæring er at den som gis opplæring tilegner seg tilstrekkelig kunnskap om metoder for å lede og veilede løfteoperasjoner slik at de blir forskriftmessig utført.


Innhold:

• Krav og ansvar til rollen operasjonelt ansvarlig

• Lover, forskrifter, standarder og retningslinjer som gjelder vedr. bruk av løfteutstyr

• Overordnet operasjonell ledelse av løfteoperasjoner

• Helhetlig planlegging av løfteoperasjoner

• Risikokartlegging

• Identifisering av og etablering av barrierer. Gjennomføring og evaluering av en løfteoperasjon

• Informasjonsutveksling

• Krav for oppbevaring av løst løfteutstyr

• Krav for ulike typer løfteutstyr

• Krav til fadder, praksis og sensor

• Avsluttende prøve

Course code: STQ-006
Course type: Classroom course
Duration: 1 day
Language: Norwegian
Price: From NOK 3490,-

Objective: The aim of the training is that theoretical and practical knowledge about fall protection and the correct use of rescue equipment, rescue of free-hanging persons, rescue of personnel over open sea, tank, stretcher transport, descent and treatment of personnel after fall accident is refreshed and repeated.


The training is adapted for personnel who are part of fall protection / rescue teams on board an installation. Participants must gain expertise in risk assessment, rescue (equipment and methods) and first aid.

Covers repetition requirements every 2nd year in accordance with NOG 113 and SFS.


Content:

Introduction
Regulations
Review of accidents and incidents
The rescue service
Equipment
Routines when working at height
Risk assessment
Management, site of injury
Stress and stress management
Hanging trauma, CPR
Rescue drills
Evaluation

 

Course code: STQ-003
Course type: Classroom course
Duration: 3 days
Language: Norwegian
Price: From NOK 7900,-

Objective: The aim of the training is that those who are given training are given the opportunity to acquire theoretical and practical knowledge about fall protection and the correct use of rescue equipment, rescue of free-hanging persons, rescue of personnel over open sea, tank, stretcher transport, descent and treatment of personnel after fall accident.


The training is adapted for personnel who are part of fall protection / rescue teams on board an installation, but also for personnel who want a basic understanding of a rescue operation, evacuation equipment after a fall accident when using fall protection / rescue equipment.

The course runs over 3 days (24 hours)

Repetition 2 every year in accordance with NOG 113 and SFS.

 

Content:

- Introduction
- Regulations, guidelines
- Best practice
- Risk assessment
- Fall protection equipment
- Use of personal protective equipment
- Knowledge of different equipment and methods
- The equipment's limitations and possibilities
- Requirements for maintenance, storage and control
- Consequences of falls

Practical and theoretical review of rescue exercises

- Planning and risk assessment of rescue
- Basic first aid
- Rescue operation w / fresh air equipment
- Rescue of a hanging person
- Rescue from tanks / cramped spaces
- Rescue over open sea
- Descent / hoisting of person
- Stabilization of person
- Knowledge of hanging trauma

Course code: EXT-012
Course type: Classroom course
Duration: 2 days
Language: Norwegian
Price: From NOK 11200,-

This course is made for personell envolved in design, planning, projecting, installation and maintenance on electrical installations and equipment offshore. 

The purpose of the standard is to minimize the hazards to people and equipment, whilst optimizing dependability.

Objective: The purpose of the standard is to minimize the hazards to people and equipment, whilst optimizing dependability.


Content:

- An easy to understand overview and explanation of the committees/regulations/standards and how they are intertwined. 

- Presentation of the regulations and norms: PTIL 5 HMS, Nek 410 (IEC 60092), Nek 420 (IEC 60079), ATEX directives including standards and the Norsok series. 

- The structure and history of the IEC 61892 series, and the scope and application. 

- By using a fictive, illustrated installation, we will focus on the practical elements covered in the following standards: 

o IEC 61892-1 - General requirements and conditions 

o IEC 61892-2 - System Design 

o IEC 61892-3 – Equipment 

o IEC 61892-4 – Cables 

o IEC 61892-6 – Installation 

 

o IEC 61892-7 – Hazardous areas

 

This course is only available in Norwegian.

Course code: KOL-021
Course type: Classroom course
Duration: 6 hours
Language: Norwegian
Price: From NOK 2550,-

The Norwegian authorities require that employees who use lifts (personnel lifts) must be able to document practical and theoretical training in their use. The employer is responsible for ensuring that employees receive the necessary training. (“Regulations regarding the execution of work” no. 1357, section 10-2 Requirements regarding documented safety training in the use of work equipment.) The course provides a basic theoretical and practical introduction to the safe use of lifts (personnel lifts). A certificate of competence is issued to participants in order to fulfil the legislation’s documentation requirements.
Objective: To provide course participants with increased knowledge and awareness of safety measures in order to avoid injuries and accidents at the workplace. 


The following topics are covered:
– Assembly
– Operation
– User qualities
– Areas of use
– Maintenance and control
– Safe use and servicing
– Classes A, B and C
– Accidents
– Legislation and regulations

Hits per page