Course catalogue

Course Goal: This course aims to provide an introduction to corrosion in the Oil and Gas Industry

Target Audience: All relevant personnel

Learning Objectives

LO1 Define what is meant by corrosion and explain why it poses a risk to the Oil and Gas Industry

LO2 Identify areas where corrosion is commonly found in oil and gas facilities

LO3 Identify the elements which are necessary for corrosion to occur

LO4 Identify the main corrodents found in oil and gas facilities and explain how these can cause corrosion

LO5 Identify different types of corrosion

LO6 Explain how corrosion can impact wells and flowlines

LO7 Explain how corrosion can impact plant and pipelines

LO8 Explain how corrosion can impact gas systems

LO9 Explain how corrosion can impact water systems

LO10 Explain how corrosion can impact deadleg areas

LO11 Identify areas where external corrosion is most prevalent

LO12 Describe corrosion control measures

LO13 Explain how to play your part in minimising corrosion

Who is this course for?

All personnel working with electricity in the Oil and Gas Industry.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

This course aims to provide all relevant personnel with a broad overview of common Electrical Safety Rules, and outlines best practice when working with electricity.

How will this course benefit my company?

By ensuring you have the knowledge of common Electrical Safety Rules, and the best practice when working with electricity, to reduce risk and injury at work.

What standards are referred to in this course?

• Health and Safety at Work Act

• Electricity at Work Regulations

• Management of Health and Safety at Work Regulations

• Electricity at Work Safe Working Practices

• Offshore Electricity and Noise Regulations

• Provision and Use of Work Equipment Regulations

• BS 7671: 2018 Requirements for Electrical Installations

• Offshore Installations (Safety Case) Regulations

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

Personnel who require knowledge or awareness of hydrates.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to provide awareness of how gas hydrates may be formed and the effects that they can have on pipeline flow assurance. The course examines what hydrates are, how they are formed and their molecular structure. It discusses flow assurance, details the risks of pipeline plugging by hydrates, and outlines the various methods of controlling hydrate formation.

How will this course benefit my company?

By ensuring you are aware of how gas hydrates may be formed and the effects that they can have on pipeline flow assurance.

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

All relevant personnel, including Work Party members, Performing Authorities and Area Authorities.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

This course will provide you with guidance and useful techniques to help you carry out effective Toolbox Talks.

How will this course benefit my company?

Communication is vital to workplace safety. This course aims to provide personnel with the knowledge and techniques required to carry out effective Toolbox Talks.

What standards are referred to in this course?

This course does not refer to specific legislation or standards.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is the course for?

All personnel who work in a role that may put them at risk of a hand or body injury.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

This course will provide learners with an introduction on how to prevent hand and body injuries in the workplace.

How will the course benefit my company?

This course to ensure personnel have the knowledge of how to protect their hands and body from injury in the workplace, by following safety measures and understanding procedures.

What standards are referenced in the course?

Reporting of Injuries, Diseases and Dangerous Occurrences Regulations (RIDDOR)

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

All personnel who work in a role within the Oil and Gas Industry that may have an impact on the environment.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

This course aims to provide an introduction to the issues involved with successful environmental management in the Oil and Gas Industry.

How will this course benefit my company?

The course will benefit companies by ensuring that all relevant personnel have an understanding of the issues involved with successful environmental management in the Oil and Gas Industry, which will help to protect the environment.

What standards are referred to in this course?

• Department of Energy and Climate Change (BEIS (formally DECC))

• The Scottish Environment Protection Agency (SEPA) in Scotland

• The Environment Agency (EA) in England, Wales and Northern Ireland

• ISO 14001 Environmental Management Systems (EMS)

• British Standard Institute's BS7750 - Specification for Environmental Management Systems (BS11994)

• Integrated Pollution Prevention and Control (IPPC) Directive

• Control of Major Accident Hazards (COMAH) Regulations

Is there an assessment?

No

Who is this course for?

Personnel requiring an awareness or understanding of the change management process.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to provide an overview of management of change. The course focuses on the steps of the management of change process, the roles and responsibilities of personnel, and the risks involved in change management and their associated control measures.

How will this course benefit my company?

By ensuring you have an overview of the management of change process.

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

Personnel who are required to work with Piping and Instrumentation Diagrams.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

This course will enable you to describe the information provided in a P&ID and explain why this information is useful.

How will this course benefit my company?

Personnel who are able read and understand the information provided in P&IDs are better able to troubleshoot system problems.

What standards are referred to in this course?

• Institute de Algerian Normalisation

• Standards Association of Zimbabwe

Is there an assessment?

Once you have completed each section of the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the section and have a pass mark of 80%.

Who is the course for?

Personnel requiring an awareness or understanding of typical flanges and gaskets and their functions.

Is previous experience required?

It is recommended you have operational experience prior to undertaking this course.

How will the course benefit me?

This course aims to provide learners with an overview of typical flanges and gaskets found in the Oil and Gas Industry.

How will the course benefit my company?

By ensuring you are introduced to the role of of typical flanges and gaskets in operations.

What standards are referenced in the course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course Goal:

This course aims to  provide learners with an overview of US best practice in relation to working with hand and power tools.

This course aims to provide an understanding of the potential hazards associated with the use of hand tools and power tools, as well as the safety precautions required to prevent those hazards from occurring.

Learning Objectives:

LO1 Identify the general hazards and control measures associated with hand and power tools

LO2 Identify specific hazards associated with hand tools

LO3 Give an overview of general power tool safety precautions

LO4 Explain how guards provide protection to operators

LO5 Give examples of tools that must be equipped with a momentary switch

LO6 Identify specific hazards and control measures related to the use of electric tools

LO7 Identify the proper procedures to follow when using a grinder

LO8 Identify specific hazards and control measures related to the use of pneumatic tools

LO9 Identify specific hazards and control measures related to the use of powder-actuated tools

LO10 Identify specific hazards and control measures related to the use of hydraulic jacks

Who is this course for?

Personnel requiring an awareness or understanding of common handling and storage methods for chemicals.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to provide an overview of the requirements for the handling and storage of hazardous substances

How will this course benefit my company?

By ensuring you have an overview of the requirements for the handling and storage of hazardous substances

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%. 

Who is this course for?

All personnel involved in forklift activities.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to provide an overview of the hazards specific to forklift activities. 

How will this course benefit my company?

By ensuring you have an overview of the hazards specific to forklift activities. 

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is the course for?

Personnel requiring an awareness or understanding of of typical pressure relief systems.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will the course benefit me?

This course aims to provide learners with an overview of typical pressure relief systems found in the Oil and Gas Industry.

How will the course benefit my company?

By ensuring you are introduced to the role of of typical pressure relief systems in operations.

What standards are referenced in the course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

Personnel requiring an awarneess or understanding of hydraulic systems.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to introduce learners to the different types of hydraulic systems.

How will this course benefit my company?

To ensure a minimum company understanding of different types of hydraulic systems found in the Oil and Gas Industry.

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%. 

Who is this course for?

Personnel requiring awareness or understanding of blinding, venting and pressure relief methods and associated safety measures.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to provide learners with an introduction to blinding, venting and pressure relief in oil and gas operations

How will this course benefit my company?

By ensuring you are introduced to blinding, venting and pressure relief in oil and gas operations

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?
All relevant personnel.

Is previous experience required?
You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

How will this course benefit me?
This course aims to provide personnel with an overview of how the Working Time Regulations impact on their working hours and the importance of effectively managing and assess the risks posed by fatigue in the workplace.

How will this course benefit my company?
By ensuring you have an overview of how the Working Time Regulations impact on their working hours and the importance of effectively managing and assess the risks posed by fatigue in the workplace.

What standards are referred to in this course?
N/A

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is the course for?

Personnel who require an overview of the steps involved in the process of disconnecting flowlines.

Is previous experience required?

You do not require previous experience to complete this course.

How will the course benefit me?

By providing you with an overview of the steps involved in the process and disconnecting flowlines and the associated safety controls.

How will the course benefit my company?

By ensuring personnel are aware of the hazards posed by disconnecting flowlines and the steps that should be followed to ensure that the work is carried out safely.

What standards are referenced in the course?

This course does not refer to specific legislation or standards.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.