Course catalogue

Who is the course for?

All personnel involved in the transportation or supporting of a load by hand or bodily force.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

The aim of this course is to increase learners’ awareness of the importance of safe manual handling operations and the risks involved with manual handling. The course also aims to outline best practices for the correct handling techniques for safe lifting; and for the pushing and pulling of loads.

How will the course benefit my company?

This course will benefit your company by reducing manual handling accidents.

What standards are referenced in the course?

• The Manual Handling Operations Regulations

• The Management of Health and Safety at Work Regulations

• Health and Safety at Work Act

• Health and Safety Executive (HSE)

Is there an assessment?

Yes

Learning objectives

- Recall what is meant by the term ‘manual handling’

- Identify the types of injuries that may result from manual handling operations

- Identify the legislation that is in place to regulate manual handling operations

- Identify the duties that are placed on employers and employees by the Manual Handling Operations Regulations

- Recognise the types of risk assessment which are relevant to manual handling operations

- Identify factors to consider when assessing manual handling operations to reduce the potential risks of injury

- Identify good handling techniques for the safe lifting of loads

- Identify good handling techniques for pushing and pulling loads

Accreditation:

This course is approved by the Institution of Occupational Safety and Health (IOSH).

IOSH is the world’s Chartered body for safety and health professionals. 

What that means:

• We are the largest membership body for health and safety professionals.

• We champion occupational safety and health causes and advocate for change.

• We advise governments, NGOs and policymakers.

• We facilitate safety and health awareness training in around 130 countries through IOSH Services Ltd, our wholly-owned trading arm.

• We commission research and set national and international standards.

• We shape the future of the profession.

Who is the course for?

All personnel who require an awareness of the hazards involved in working at height.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

By increasing your awareness of the potential hazards of working at height and the steps that can be taken to reduce your risk of injury.

How will the course benefit my company?

This course is aligned to industry best practice and aims to make personnel aware of the potential hazards of working at height and the controls that can be implemented to reduce risk.

What standards are referenced in the course?

Work at Height Regulations

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Accredidation:

- CPD IOSH

- This course is approved by the Institution of Occupational Safety and Health (IOSH).

- IOSH is the world’s Chartered body for safety and health professionals. 

What that means:

• We are the largest membership body for health and safety professionals.

• We champion occupational safety and health causes and advocate for change.

• We advise governments, NGOs and policymakers.

• We facilitate safety and health awareness training in around 130 countries through IOSH Services Ltd, our wholly-owned trading arm.

• We commission research and set national and international standards.

• We shape the future of the profession.

Who is the course for?

All personnel who may be exposed to asbestos at, or above, the permissible exposure levels, and personnel who perform housekeeping or maintenance operations in areas that have asbestos-containing materials and potential asbestos-containing materials.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

This course aims to provide learners with an understanding of the hazards associated with exposure to asbestos. It will also identify where asbestos may be found, how it can potentially affect your health, and what you need to do to protect yourself.

How will the course benefit my company?

This course will benefit a company by ensuring learners have the knowledge to protect themselves from exposure to asbestos.

Assessment Details

End of course assessment with a pass mark of 80% and 2 attempts.

Who is this course for?

This course is aimed at personnel working in the energy and maritime sectors.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

Dropped objects can cause serious injuries as well as damage to assets and equipment. This course will give you a basic understanding of the common causes of dropped objects, their potential consequences and how they can be prevented.

How will this course benefit my company?

By ensuring that personnel are aware of the risk dropped objects present, their common causes and how they can be prevented.

Is there an assessment?

Yes

Accreditation:

CPD, IOSH 

- This course is approved by the Institution of Occupational Safety and Health (IOSH).

- IOSH is the world’s Chartered body for safety and health professionals. 

What that means:

• We are the largest membership body for health and safety professionals.

• We champion occupational safety and health causes and advocate for change.

• We advise governments, NGOs and policymakers.

• We facilitate safety and health awareness training in around 130 countries through IOSH Services Ltd, our wholly-owned trading arm.

• We commission research and set national and international standards.

• We shape the future of the profession.

Who is this course for?

All personnel who could potentially be exposed to noise in the workplace. 

Is previous experience required?

No previous knowledge or experience is required to complete this course.

How will this course benefit me?

This course aims to provide personnel with the knowledge required to understand the hazards and controls associated with noise in the workplace.

How will this course benefit my company?

By ensuring personnel are aware of the hazards posed by noise in the workplace and the controls that should be put in place to minimise their exposure and reduce the risk of hearing loss.

What standards are referred to in this course?

Control of Noise at Work Regulations

Is there an assessment?

Yes

Accreditation:

This course is approved by the Institution of Occupational Safety and Health (IOSH).

IOSH is the world’s Chartered body for safety and health professionals. 

What that means:

We are the largest membership body for health and safety professionals.

We champion occupational safety and health causes and advocate for change.

We advise governments, NGOs and policymakers.

We facilitate safety and health awareness training in around 130 countries through IOSH Services Ltd, our wholly-owned trading arm.

We commission research and set national and international standards.

We shape the future of the profession.

Who is the course for? 

Personnel who are required to work with, or near to, substances hazardous to health.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

Many substances can cause harm to health if the appropriate precautions are not taken, including some substances that are not hazardous in themselves. This course will give you a basic overview of the COSHH regulations and how they help to protect workers. 

How will the course benefit my company? 

Ensuring personnel are familiar with the requirements of the COSHH Regulations will help to reduce the risk of accidents, incidents and injuries in the workplace.

What standards are referenced in the course?

The Control of Substances Hazardous to Health Regulations (COSHH).

Is there an assessment? 

Yes - This course has an assessment with a 80% pass mark and two attempts

Learning Objectives:

• Recognise why COSHH is important for protecting workers’ health

• Identify considerations for COSHH risk assessments

• Recognise control measures for mitigating risks from hazardous substances

Who is this course for?

All personnel across an organisation to set a benchmark of knowledge and awareness of risk assessment.

Is previous experience required?

No previous experience is required to complete this course. 

How will this course benefit me?

This course aims to introduce, develop and increase learners’ knowledge and awareness of the importance of Risk Assessment and how it can reduce the likelihood of accidents in the workplace.

How will this course benefit my company?

By ensuring you have the required knowledge and awareness of the importance of Risk Assessment and how it can reduce the likelihood of accidents in the workplace.

What standards are referred to in this course?

No standards or regulations are referenced in this course.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Accreditation:

This course is approved by the Institution of Occupational Safety and Health (IOSH).

IOSH is the world’s Chartered body for safety and health professionals.

What that means:

We are the largest membership body for health and safety professionals.

We champion occupational safety and health causes and advocate for change.

We advise governments, NGOs and policymakers.

We facilitate safety and health awareness training in around 130 countries through IOSH Services Ltd, our wholly-owned trading arm.

We commission research and set national and international standards.

We shape the future of the profession.

Who is the course for?

All personnel who are at risk from slips, trips and falls.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

This course aims to increase learners’ awareness of the risks, and consequences, of slips, trips and falls in the workplace and the control measures and steps that can be taken to reduce the risk of slips, trips and falls, based on industry best practice.

How will the course benefit my company?

This course will benefit companies' by reducing slip, trip and fall injuries among personnel.

What standards are referenced in the course?

• Health and Safety at Work Act

• Management of Health and Safety at Work Regulations 

• Workplace (Health, Safety and Welfare) Regulations 

• Health and Safety Executive (HSE)

Is there an assessment?

Course assessment with a 80% pass mark and two attempts.

Accreditation

This course is approved by the Institution of Occupational Safety and Health (IOSH).

IOSH is the world’s Chartered body for safety and health professionals. 

What that means:

• We are the largest membership body for health and safety professionals.

• We champion occupational safety and health causes and advocate for change.

• We advise governments, NGOs and policymakers.

• We facilitate safety and health awareness training in around 130 countries through IOSH Services Ltd, our wholly-owned trading arm.

• We commission research and set national and international standards.

• We shape the future of the profession.

Who is the course for?

This course is aimed at all personnel involved in lifting operations in the Oil and Gas Industry.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

This course provides learners with an awareness of the Lifting Operations and Lifting Equipment Regulations (LOLER) and gives an overview of industry best practice in relation to working with lifting equipment.

How will the course benefit my company?

This course will provide personnel with an overview of rigging and lifting operations.

What standards are referenced in the course?

• Lifting Operations and Lifting Equipment Regulations (LOLER) 

• Health and Safety at Work Act 

• Management of Health and Safety at Work Regulations 

• Provision and Use of Work Equipment Regulations (PUWER)

Is there an assessment?

Yes

Accreditation

This course is approved by the Institution of Occupational Safety and Health (IOSH).

IOSH is the world’s Chartered body for safety and health professionals.

What that means:

We are the largest membership body for health and safety professionals.

We champion occupational safety and health causes and advocate for change.

We advise governments, NGOs and policymakers.

We facilitate safety and health awareness training in around 130 countries through IOSH Services Ltd, our wholly-owned trading arm.

We commission research and set national and international standards.

We shape the future of the profession.

Who is the course for?

All personnel who may be exposed to naturally occurring radioactive material (NORM) in the workplace.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

This course aims to provide an awareness of NORM and provide best practices for managing NORM in oil and gas producing facilities.

How will the course benefit my company?

The course will benefit companies by ensuring that all members of personnel have an awareness of NORM and how it should be managed, which will help to reduce workplace accidents.

What standards are referenced in the course?

There are no standards or regulations referenced in this course.

Is there an assessment? 

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80% with 2 attempts.

Accreditation:

CPD, IOSH. 

This course is approved by the Institution of Occupational Safety and Health (IOSH).

IOSH is the world’s Chartered body for safety and health professionals. 

What that means:

• We are the largest membership body for health and safety professionals.

• We champion occupational safety and health causes and advocate for change.

• We advise governments, NGOs and policymakers.

• We facilitate safety and health awareness training in around 130 countries through IOSH Services Ltd, our wholly-owned trading arm.

• We commission research and set national and international standards.

• We shape the future of the profession.

Who is this course for?

All personnel who works in a role within the Oil and Gas Industry that may have a direct impact on the environment.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

This course aims to increase learners’ awareness of the environmental aspects and impacts related to the Oil and Gas Industry and the actions that can be taken to minimise environmental damage.

How will this course benefit my company?

This course will benefit a company by helping personnel become aware of actions that can be taken to reduce environmental damage.

What standards are referred to in this course?

BEIS (formally DECC))

Oil Spill Prevention and Response Advisory Group

Health and Safety Executive (HSE) 

ISO 14001 Environmental Management Systems

Is there an assessment?

Yes

Accreditation:

This course is approved by the Institution of Occupational Safety and Health (IOSH).

IOSH is the world’s Chartered body for safety and health professionals.

What that means:

We are the largest membership body for health and safety professionals.

We champion occupational safety and health causes and advocate for change.

We advise governments, NGOs and policymakers.

We facilitate safety and health awareness training in around 130 countries through IOSH Services Ltd, our wholly-owned trading arm.

We commission research and set national and international standards.

We shape the future of the profession.

Who is this course for?

Personnel who are involved in work processes that can result in hand-arm vibration exposure.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

This course will benefit learners by making them aware of the risks of hand-arm vibration and the effects that it can cause.

How will this course benefit my company?

This course will benefit companies by ensuring that personnel have an understanding of the risks of hand-arm vibration and in turn will reduce the number of injuries that result from this.

Is there an assessment? 

Yes

Who is this course for?

All personnel within the Oil and Gas Industry.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

This course aims to increase learners’ awareness of the importance of Personal Protective Equipment (PPE), and outline the legal duties and responsibilities of employers and employees in relation to PPE.

How will this course benefit my company?

The course will benefit companies by reducing PPE related incidents and injuries. 

What standards are referred to in this course?

Control of Lead at Work Regulations 

Ionising Radiations Regulations 

Control of Asbestos at Work Regulations 

Control of Substances Hazardous to Health Regulations 

Control of Noise at Work Regulations

Personal Protective Equipment at Work Regulations

Is there an assessment?

Yes.

Accreditation:

This course is approved by the Institution of Occupational Safety and Health (IOSH). 

IOSH is the world’s Chartered body for safety and health professionals.

What that means:

We are the largest membership body for health and safety professionals.

We champion occupational safety and health causes and advocate for change.

We advise governments, NGOs and policymakers.

We facilitate safety and health awareness training in around 130 countries through IOSH Services Ltd, our wholly-owned trading arm.

We commission research and set national and international standards.

We shape the future of the profession.

Who is this course for?

All personnel who work with chemicals in the Oil and Gas Industry.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

This course provides learners with an in depth few on the use, management and control of chemicals in the Oil and Gas Industry and how to react in an emergency situation that has resulted from a chemical hazard.

How will this course benefit my company?

The course will benefit companies by ensuring that all personnel have an in depth view of industry best practice for working with chemicals, which will in turn, help keep those working with chemicals safe.

What standards are referred to in this course?

• Offshore Petroleum (Oil Pollution Prevention and Control) Regulations

• The Control of Substances Hazardous to Health (COSHH)

• Regulation, Evaluation, Authorisation and Restriction of Chemicals (REACH)

• United Nations Globally Harmonized System of Classification and Labelling of Chemicals (GHS)

• EU Classification, Labelling and Packaging (CLP) Regulation

• The GB CLP Regulation

• The Norwegian CLP Regulation, or

• The Hazard Communication Standard (HCS 2012)

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?
Production operators.

Is previous experience required?
No previous experience is required to complete this course.

How will this course benefit me?
This course aims to provide appropriate knowledge of the techniques required for carrying out pressure testing and leak testing in the workplace.

How will this course benefit my company?

By ensuring you have appropriate knowledge of the techniques required for carrying out pressure testing and leak testing in the workplace.

What standards are referred to in this course?
This course does not refer to specific legislation or standards.

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Accreditation:

This course is approved by the Institution of Occupational Safety and Health (IOSH).

IOSH is the world’s Chartered body for safety and health professionals.

What that means:

We are the largest membership body for health and safety professionals.

We champion occupational safety and health causes and advocate for change.

We advise governments, NGOs and policymakers.

We facilitate safety and health awareness training in around 130 countries through IOSH Services Ltd, our wholly-owned trading arm.

We commission research and set national and international standards.

We shape the future of the profession.

Who is the course for?

All personnel who may be exposed to nitrogen in the workplace.

Is previous experience required?

No previous experience is required to complete this course. 

How will the course benefit me?

This course aims to provide learners with an awareness of nitrogen and provide best practice for work involving nitrogen in oil and gas producing facilities.

How will the course benefit my company?

The course will benefit companies by ensuring that all relevant personnel understand the best practice when working with nitrogen in oil and gas producing facilities.

What standards are referenced in the course?

Control of Substances Hazardous to Health (COSHH) Regulations 

Health and Safety Executive (Health and Safety Executive (HSE)

The Occupational Safety and Health Administration (OSHA)

Is there an assessment?

Yes

Accreditation:

This course is approved by the Institution of Occupational Safety and Health (IOSH).

IOSH is the world’s Chartered body for safety and health professionals.

What that means:

We are the largest membership body for health and safety professionals.

We champion occupational safety and health causes and advocate for change.

We advise governments, NGOs and policymakers.

We facilitate safety and health awareness training in around 130 countries through IOSH Services Ltd, our wholly-owned trading arm.

We commission research and set national and international standards.

We shape the future of the profession.

Who is the course for?

All personnel who work with machinery, tools and appliances.

Is previous experience required?

No previous experience is required to complete this course. 

How will the course benefit me?

This course aims to provide learners with an awareness of the requirements of the Provision and Use of Work Equipment Regulations (PUWER) and how they apply in the workplace.

How will the course benefit my company?

This course will benefit companies’ by providing personnel with an awareness of PUWER. 

What standards are referenced in the course?

Provision and Use of Work Equipment Regulations (PUWER)

Health and Safety at Work Act

Management of Health and Safety at Work Regulations

Is there an assessment?

Yes

Accreditation

This course is approved by the Institution of Occupational Safety and Health (IOSH).

IOSH is the world’s Chartered body for safety and health professionals.

What that means:

• We are the largest membership body for health and safety professionals.

• We champion occupational safety and health causes and advocate for change.

• We advise governments, NGOs and policymakers.

• We facilitate safety and health awareness training in around 130 countries through IOSH Services Ltd, our wholly-owned trading arm.

• We commission research and set national and international standards.

• We shape the future of the profession.

Who is this course for?
This course is aimed at all personnel involved in mechanical isolations.

Is previous experience required?
No previous experience is required to complete this course.

How will this course benefit me?
This course aims to provide all relevant personnel with an overview of best practices in mechanical isolations.

How will this course benefit my company?

The course will benefit companies by ensuring that all relevant personnel have an understanding of mechanical isolation best practices, which will reduce accidents and injuries at work.

What standards are referred to in this course?
The United Kingdom’s UK’s Health and Safety Executive’s Regulation 253 ‘The safe isolation of plant and equipment’.

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

Personnel throughout an organisation which operates within major accident hazard sectors.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to provide learners with an introduction to major accident hazards.

How will this course benefit my company?

By ensuring you have had an introduction to major accident hazards.

What standards are referred to in this course?

The Offshore Installations (Safety Case) Regulations

The Offshore Installation and Pipeline Works (Management and Administration) Regulations (MAR)

The Offshore Installations (Prevention of Fire andf Explosion and Emergency Response) Regulations (PFEER)

The Offshore Installations and Wells (Design and Contruction) Regulations (DCR)

The Control of Major Accident Hazards Regulations (COMAH)

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

This course is aimed towards all personnel who use abrasive wheels in the workplace.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

This course aims to provide all relevant personnel with the knowledge required to understand the hazards and controls associated with the use of abrasive wheels.

How will this course benefit my company?

The course will benefit companies by providing personnel with knowledge of how to avoid risks and hazards when using abrasive wheels, subsequently reducing accidents and injuries in the workplace.

What standards are referred to in this course? 

• Provision and Use of Work Equipment Regulations (PUWER) 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course Goal: This course aims to provide an introduction to corrosion in the Oil and Gas Industry

Target Audience: All relevant personnel

Learning Objectives

LO1 Define what is meant by corrosion and explain why it poses a risk to the Oil and Gas Industry

LO2 Identify areas where corrosion is commonly found in oil and gas facilities

LO3 Identify the elements which are necessary for corrosion to occur

LO4 Identify the main corrodents found in oil and gas facilities and explain how these can cause corrosion

LO5 Identify different types of corrosion

LO6 Explain how corrosion can impact wells and flowlines

LO7 Explain how corrosion can impact plant and pipelines

LO8 Explain how corrosion can impact gas systems

LO9 Explain how corrosion can impact water systems

LO10 Explain how corrosion can impact deadleg areas

LO11 Identify areas where external corrosion is most prevalent

LO12 Describe corrosion control measures

LO13 Explain how to play your part in minimising corrosion

Who is this course for?

All personnel working with electricity in the Oil and Gas Industry.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

This course aims to provide all relevant personnel with a broad overview of common Electrical Safety Rules, and outlines best practice when working with electricity.

How will this course benefit my company?

By ensuring you have the knowledge of common Electrical Safety Rules, and the best practice when working with electricity, to reduce risk and injury at work.

What standards are referred to in this course?

• Health and Safety at Work Act

• Electricity at Work Regulations

• Management of Health and Safety at Work Regulations

• Electricity at Work Safe Working Practices

• Offshore Electricity and Noise Regulations

• Provision and Use of Work Equipment Regulations

• BS 7671: 2018 Requirements for Electrical Installations

• Offshore Installations (Safety Case) Regulations

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

All relevant personnel, including Work Party members, Performing Authorities and Area Authorities.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

This course will provide you with guidance and useful techniques to help you carry out effective Toolbox Talks.

How will this course benefit my company?

Communication is vital to workplace safety. This course aims to provide personnel with the knowledge and techniques required to carry out effective Toolbox Talks.

What standards are referred to in this course?

This course does not refer to specific legislation or standards.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

Personnel who require knowledge or awareness of hydrates.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to provide awareness of how gas hydrates may be formed and the effects that they can have on pipeline flow assurance. The course examines what hydrates are, how they are formed and their molecular structure. It discusses flow assurance, details the risks of pipeline plugging by hydrates, and outlines the various methods of controlling hydrate formation.

How will this course benefit my company?

By ensuring you are aware of how gas hydrates may be formed and the effects that they can have on pipeline flow assurance.

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is the course for?

All personnel who work in a role that may put them at risk of a hand or body injury.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

This course will provide learners with an introduction on how to prevent hand and body injuries in the workplace.

How will the course benefit my company?

This course to ensure personnel have the knowledge of how to protect their hands and body from injury in the workplace, by following safety measures and understanding procedures.

What standards are referenced in the course?

Reporting of Injuries, Diseases and Dangerous Occurrences Regulations (RIDDOR)

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

All personnel who work in a role within the Oil and Gas Industry that may have an impact on the environment.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

This course aims to provide an introduction to the issues involved with successful environmental management in the Oil and Gas Industry.

How will this course benefit my company?

The course will benefit companies by ensuring that all relevant personnel have an understanding of the issues involved with successful environmental management in the Oil and Gas Industry, which will help to protect the environment.

What standards are referred to in this course?

• Department of Energy and Climate Change (BEIS (formally DECC))

• The Scottish Environment Protection Agency (SEPA) in Scotland

• The Environment Agency (EA) in England, Wales and Northern Ireland

• ISO 14001 Environmental Management Systems (EMS)

• British Standard Institute's BS7750 - Specification for Environmental Management Systems (BS11994)

• Integrated Pollution Prevention and Control (IPPC) Directive

• Control of Major Accident Hazards (COMAH) Regulations

Is there an assessment?

No

Who is this course for?

Personnel requiring an awareness or understanding of the change management process.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to provide an overview of management of change. The course focuses on the steps of the management of change process, the roles and responsibilities of personnel, and the risks involved in change management and their associated control measures.

How will this course benefit my company?

By ensuring you have an overview of the management of change process.

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

Personnel who are required to work with Piping and Instrumentation Diagrams.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

This course will enable you to describe the information provided in a P&ID and explain why this information is useful.

How will this course benefit my company?

Personnel who are able read and understand the information provided in P&IDs are better able to troubleshoot system problems.

What standards are referred to in this course?

• Institute de Algerian Normalisation

• Standards Association of Zimbabwe

Is there an assessment?

Once you have completed each section of the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the section and have a pass mark of 80%.

Who is the course for?

Personnel requiring an awareness or understanding of typical flanges and gaskets and their functions.

Is previous experience required?

It is recommended you have operational experience prior to undertaking this course.

How will the course benefit me?

This course aims to provide learners with an overview of typical flanges and gaskets found in the Oil and Gas Industry.

How will the course benefit my company?

By ensuring you are introduced to the role of of typical flanges and gaskets in operations.

What standards are referenced in the course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course Goal:

This course aims to  provide learners with an overview of US best practice in relation to working with hand and power tools.

This course aims to provide an understanding of the potential hazards associated with the use of hand tools and power tools, as well as the safety precautions required to prevent those hazards from occurring.

Learning Objectives:

LO1 Identify the general hazards and control measures associated with hand and power tools

LO2 Identify specific hazards associated with hand tools

LO3 Give an overview of general power tool safety precautions

LO4 Explain how guards provide protection to operators

LO5 Give examples of tools that must be equipped with a momentary switch

LO6 Identify specific hazards and control measures related to the use of electric tools

LO7 Identify the proper procedures to follow when using a grinder

LO8 Identify specific hazards and control measures related to the use of pneumatic tools

LO9 Identify specific hazards and control measures related to the use of powder-actuated tools

LO10 Identify specific hazards and control measures related to the use of hydraulic jacks

Who is this course for?

Personnel requiring an awareness or understanding of common handling and storage methods for chemicals.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to provide an overview of the requirements for the handling and storage of hazardous substances

How will this course benefit my company?

By ensuring you have an overview of the requirements for the handling and storage of hazardous substances

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%. 

Who is this course for?

All personnel involved in forklift activities.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to provide an overview of the hazards specific to forklift activities. 

How will this course benefit my company?

By ensuring you have an overview of the hazards specific to forklift activities. 

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is the course for?

Personnel requiring an awareness or understanding of of typical pressure relief systems.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will the course benefit me?

This course aims to provide learners with an overview of typical pressure relief systems found in the Oil and Gas Industry.

How will the course benefit my company?

By ensuring you are introduced to the role of of typical pressure relief systems in operations.

What standards are referenced in the course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

Personnel requiring an awarneess or understanding of hydraulic systems.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to introduce learners to the different types of hydraulic systems.

How will this course benefit my company?

To ensure a minimum company understanding of different types of hydraulic systems found in the Oil and Gas Industry.

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%. 

Who is this course for?

Personnel requiring awareness or understanding of blinding, venting and pressure relief methods and associated safety measures.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to provide learners with an introduction to blinding, venting and pressure relief in oil and gas operations

How will this course benefit my company?

By ensuring you are introduced to blinding, venting and pressure relief in oil and gas operations

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?
All relevant personnel.

Is previous experience required?
You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

How will this course benefit me?
This course aims to provide personnel with an overview of how the Working Time Regulations impact on their working hours and the importance of effectively managing and assess the risks posed by fatigue in the workplace.

How will this course benefit my company?
By ensuring you have an overview of how the Working Time Regulations impact on their working hours and the importance of effectively managing and assess the risks posed by fatigue in the workplace.

What standards are referred to in this course?
N/A

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is the course for?

Personnel who require an overview of the steps involved in the process of disconnecting flowlines.

Is previous experience required?

You do not require previous experience to complete this course.

How will the course benefit me?

By providing you with an overview of the steps involved in the process and disconnecting flowlines and the associated safety controls.

How will the course benefit my company?

By ensuring personnel are aware of the hazards posed by disconnecting flowlines and the steps that should be followed to ensure that the work is carried out safely.

What standards are referenced in the course?

This course does not refer to specific legislation or standards.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.