Oil and Gas

Course catalogue

Category

Reset
  • Patch#2

Course type

Course provider

Reset
  • Mintra UK
hits
13
Course code: MUK-022
Course type: E-learning course
Duration: 30 minutes
Language: English
Price: NOK 500,-

Who is this course for?

All personnel who may be exposed to asbestos at, or above, the permissible exposure levels, and personnel who perform housekeeping or maintenance operations in areas that have asbestos-containing materials and potential asbestos-containing materials.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

This course aims to provide learners with an understanding of the hazards associated with exposure to asbestos.

How will this course benefit my company?

This course will benefit a company by ensuring learners have the knowledge to protect themselves from exposure to asbestos.

What standards are referred to in this course?

The Asbestos Industry Regulations 1931

Asbestos (Prohibitions) Regulations 1985

Control of Asbestos Regulations

The European Union’s directive

Is there an assessment?

Yes.


Accreditation:

This course is approved by the Institution of Occupational Safety and Health (IOSH).

IOSH is the world’s Chartered body for safety and health professionals.

What that means:

We are the largest membership body for health and safety professionals.

We champion occupational safety and health causes and advocate for change.

We advise governments, NGOs and policymakers.

We facilitate safety and health awareness training in around 130 countries through IOSH Services Ltd, our wholly-owned trading arm.

We commission research and set national and international standards.

We shape the future of the profession.

 

Course code: MUK-031
Course type: E-learning course
Duration: 45 minutes
Language: English
Price: NOK 500,-

Who is this course for?

Personnel who work at a site or location where there is a risk that objects could fall from height.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

Dropped objects can cause serious injuries as well as damage to assets and equipment. This course will give you a basic understanding of the common causes of dropped objects, their potential consequences and how they can be prevented.

How will this course benefit my company?

By ensuring that personnel are aware of the risk dropped objects present, their common causes and how they can be prevented.

What standards are referred to in this course?

Occupational Safety and Health Act (USA)

Health and Safety at Work Act (UK)

Is there an assessment?

Yes


Accreditation:

This course is approved by the Institution of Occupational Safety and Health (IOSH).

IOSH is the world’s Chartered body for safety and health professionals.

What that means:

We are the largest membership body for health and safety professionals.

We champion occupational safety and health causes and advocate for change.

We advise governments, NGOs and policymakers.

We facilitate safety and health awareness training in around 130 countries through IOSH Services Ltd, our wholly-owned trading arm.

We commission research and set national and international standards.

We shape the future of the profession.

 

Course code: MUK-070
Course type: E-learning course
Duration: 30 minutes
Language: English
Price: NOK 500,-

Who is the course for?

Any personnel who require an awareness of the environmental impacts associated with offshore waste and how these wastes can be managed.

 

Is previous experience required?

You do not require any previous experience to complete this course.

 

How will the course benefit me?

This course will provide you with an understanding of the types of waste generated offshore, how these wastes impact the environment and the methods that can be used to reduce and manage waste.

 

How will the course benefit my company?

Environmentally aware personnel can help to reduce the environmental impacts of your operations and improve environmental performance.

 

What standards are referenced in the course?

• The European Union (EU) Waste Framework Directive

• The International Convention for the Prevention of Pollution from Ships (MARPOL) 1973 - Annex IV

• Merchant Shipping (Prevention of Pollution by Sewage and Garbage from Ships) Regulations

• Deposits in the Sea (Exemption) Order 

• Landfill Directive 

• Environmental Protection (Duty of Care) Regulations

• Special/Hazardous Waste Regulations

• The Special Waste Amendment (Scotland) Regulations 

• Hazardous Waste (England and Wales) Regulations 

• Radioactive Substances Act

• Environmental Permitting (England and Wales) Regulations 

• Waste (England and Wales) Regulations

• Waste (Scotland) Regulations 

• Controlled Waste (England and Wales) Regulations

• Zero Waste (Scotland) Regulations

 

Is there an assessment? 

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: MUK-019
Course type: E-learning course
Duration: 60 minutes
Language: English
Price: NOK 1000,-

Who is this course for?
Production operators.

Is previous experience required?
No previous experience is required to complete this course.

How will this course benefit me?
This course aims to provide appropriate knowledge of the techniques required for carrying out pressure testing and leak testing in the workplace.

How will this course benefit my company?
By ensuring you have appropriate knowledge of the techniques required for carrying out pressure testing and leak testing in the workplace.

What standards are referred to in this course?
This course does not refer to specific legislation or standards.

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.


Accreditation:

This course is approved by the Institution of Occupational Safety and Health (IOSH).

IOSH is the world’s Chartered body for safety and health professionals.

 

What that means:

We are the largest membership body for health and safety professionals.

We champion occupational safety and health causes and advocate for change.

We advise governments, NGOs and policymakers.

We facilitate safety and health awareness training in around 130 countries through IOSH Services Ltd, our wholly-owned trading arm.

We commission research and set national and international standards.

We shape the future of the profession.

Course code: MUK-015
Course type: E-learning course
Duration: 30 minutes
Language: English
Price: NOK 500,-

Who is this course for?

All personnel within the Oil and Gas Industry.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

This course aims to increase learners’ awareness of the importance of Personal Protective Equipment (PPE), and outline the legal duties and responsibilities of employers and employees in relation to PPE.

How will this course benefit my company?

The course will benefit companies by reducing PPE related incidents and injuries. 

What standards are referred to in this course?

Control of Lead at Work Regulations 

Ionising Radiations Regulations 

Control of Asbestos at Work Regulations 

Control of Substances Hazardous to Health Regulations 

Control of Noise at Work Regulations

Personal Protective Equipment at Work Regulations

Is there an assessment?

Yes.


Accreditation:

This course is approved by the Institution of Occupational Safety and Health (IOSH). 

IOSH is the world’s Chartered body for safety and health professionals.

What that means:

We are the largest membership body for health and safety professionals.

We champion occupational safety and health causes and advocate for change.

We advise governments, NGOs and policymakers.

We facilitate safety and health awareness training in around 130 countries through IOSH Services Ltd, our wholly-owned trading arm.

We commission research and set national and international standards.

We shape the future of the profession.

Course code: MUK-110
Course type: E-learning course
Duration: 1 hour
Language: English
Price: NOK 1000,-

Who is this course for?

Personnel who require an awareness or understanding of the accident and incident investigation processes.

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

 

How will this course benefit me?

This course aims to provide learners with an overview of industry best practice in relation to accident and incident investigation

 

How will this course benefit my company?

By ensuring you have an overview of industry best practice in relation to accident and incident investigation

 

What standards are referred to in this course?

Reporting of Injuries

Diseases and Dangerous Occurrences Regulations (RIDDOR) 2013

HSG245, Management of Health and Safety at Work Regulations 1999

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: MUK-064
Course type: E-learning course
Duration: 30 minutes
Language: English
Price: NOK 500,-

Who is this course for?

Personnel who require awareness and understanding of the hazards and controls of common compressed air uses.

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

 

How will this course benefit me?

This course aims to encourage the safe use of compressed air and describes the ways in which compressed air can be dangerous as well as how to minimise the risks of such dangers occurring

 

How will this course benefit my company?

By ensuring you are introducted  to safe use of compressed air and describes the ways in which compressed air can be dangerous as well as how to minimise the risks of such dangers occurring

 

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: MUK-068
Course type: E-learning course
Duration: 20 minutes
Language: English
Price: NOK 500,-

Who is this course for?

For all personnel who are involved in working with gas turbines.

 

Is previous experience required?

No previous experience is required to complete this course.

 

How will this course benefit me?

This course aims to provide an introduction to gas turbines and how they are designed and operated.

 

How will this course benefit my company?

The course will benefit companies by ensuring that all relevant personnel have an understanding of gas turbines and how they are designed and operated.

 

What standards are referred to in this course?

No standards or regulations are referenced in this course.

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: MUK-181
Course type: E-learning course
Duration: 35 minutes
Language: English
Price: NOK 500,-

Who is this course for?

All personnel.

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role.

 

How will this course benefit me?

This course aims to provide learners with the knowledge of how to assess when it is safe to tackle a fire, information on different types of extinguisher, and an overview of how to operate a fire extinguisher safely.

 

How will this course benefit my company?

To ensure you have the knowledge of how to assess when it is safe to tackle a fire, information on different types of extinguisher, and an overview of how to operate a fire extinguisher safely.

 

What standards are referred to in this course?

The course is made according to industry best practice.

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: MUK-143
Course type: E-learning course
Duration: 30 Minutes
Language: English
Price: NOK 500,-

"Who is this course for?

Personnel requiring awareness or understanding of gas detection and measurement methods.

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

 

How will this course benefit me?

This course aims to provide information about the types of gases found in the oil and gas industry and how these gases are detected and measured

 

How will this course benefit my company?

By ensuring you have  information about the types of gases found in the oil and gas industry and how these gases are detected and measured

 

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%. "

Course code: MUK-129
Course type: E-learning course
Duration: 15 Minutes
Language: English
Price: NOK 500,-

Who is this course for?

Personnel requiring and awarneess and understanding of welding operations and appropriate safety controls.

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

 

How will this course benefit me?

This course aims to provide an overview of industry best practice in relation to welding operations

 

How will this course benefit my company?

To ensure you have an overview of industry best practice in relation to welding operations

 

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%. 

Course code: MUK-089
Course type: E-learning course
Duration: 3 hours
Language: English
Price: NOK 1500,-

Who is this course for?

Personnel requiring awareness and understanding of Natural Gas & LNG and associated HSE considerations.

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

 

How will this course benefit me?

This course aims to improve your knowledge of Natural Gas Liquid and LNG including transport and HSE considerations.

 

This course contains nine modules:

Module 1: An Overview of Gas Liquids

Module 2: Chemical and Physical Properties of Gas Liquids

Module 3: Liquefied Petroleum Gas

Module 4: Natural Gas Liquids (NGL) Recovery

Module 5: Removal of Natural Gas Impurities

Module 6: Liquefaction of Natural Gas

Module 7: Shore-Based Storage of Gas Liquids

Module 8: Transportation of Liquefied Natural Gas

Module 9: Health, Safety and Environmental (HSE) Issues of Gas Liquids

 

How will this course benefit my company?

To ensure you have an understanding of NLG, LNG, transportation and HSE considerations.

 

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice. 

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: MUK-053
Course type: E-learning course
Duration: 30 minutes
Language: English
Price: NOK 500,-

Who is this course for?

This course is aimed at all personnel involved in operations involving the use of seals, particularly those who are expected to undertake related duties in the workplace.

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role.

 

How will this course benefit me?

This course aims to provide an overview of the role and application of seals and gaskets.

 

How will this course benefit my company?

To ensure you have an overview of the role and application of seals and gaskets.

 

What standards are referred to in this course?

The course is made according to industry best practice.

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Hits per page