Course catalogue

Who is the course for?

All personnel involved in the transportation or supporting of a load by hand or bodily force.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

The aim of this course is to increase learners’ awareness of the importance of safe manual handling operations and the risks involved with manual handling. The course also aims to outline best practices for the correct handling techniques for safe lifting; and for the pushing and pulling of loads.

How will the course benefit my company?

This course will benefit your company by reducing manual handling accidents.

What standards are referenced in the course?

• The Manual Handling Operations Regulations

• The Management of Health and Safety at Work Regulations

• Health and Safety at Work Act

• Health and Safety Executive (HSE)

Is there an assessment?

Yes

Learning objectives

- Recall what is meant by the term ‘manual handling’

- Identify the types of injuries that may result from manual handling operations

- Identify the legislation that is in place to regulate manual handling operations

- Identify the duties that are placed on employers and employees by the Manual Handling Operations Regulations

- Recognise the types of risk assessment which are relevant to manual handling operations

- Identify factors to consider when assessing manual handling operations to reduce the potential risks of injury

- Identify good handling techniques for the safe lifting of loads

- Identify good handling techniques for pushing and pulling loads

Accreditation:

This course is approved by the Institution of Occupational Safety and Health (IOSH).

IOSH is the world’s Chartered body for safety and health professionals. 

What that means:

• We are the largest membership body for health and safety professionals.

• We champion occupational safety and health causes and advocate for change.

• We advise governments, NGOs and policymakers.

• We facilitate safety and health awareness training in around 130 countries through IOSH Services Ltd, our wholly-owned trading arm.

• We commission research and set national and international standards.

• We shape the future of the profession.

Who is the course for?

All categories of crane operators who have completed a basic slinger course.

Is previous experience required?

Completed basic slinger course.

How will the course benefit me?

All usage, storage, and inspections of lifting equipment shall be in accordance with the producer's instructions and requirements stipulated in the NORSOK R-003 standard. Lifting equipment shall be used only by personnel who have and can document competence in lifting operations.

How will the course benefit my company?

By ensuring you have required knowledge as a basic slinger to enable you to reduce accidents and incidents.

What standards are referenced in the course?

NORSOK R-003, 2017

Is there an assessment?

Yes

Who is this course for:

All categories of crane operators who have completed a basic rigging course.

Is previous experience required?

Learners must have completed a basic rigging course.

How will this course benefit me?

By ensuring you have the required safety knowledge and theoretical competence as a rigger. 

How will this course benefit my company?

This course provides a basic review and update of knowledge of rigging operations in accordance with applicable standards and regulations. All rigging operations shall be performed according to applicable safety regulations. These specifications are stipulated in the NORSOK R-003 standard and in the Regulations for using work equipment. Only personnel who have documented rigger training may perform rigging operations. This course provides a basic review and update of knowledge of rigging operations in accordance with applicable standards and regulations. 

What standards are referred to in this course?

NORSOK R-003, 2017

Is there an assessment?

Trainingportal assessment with an 80% pass mark and two attempts.

Who is this course for:
This course is for users of scaffolding as a work platform in accordance with § 17-5 in ‘Regulations concerning the Performance of Work’.

Is previous experience required?
No previous experience is required to complete this course.

How will this course benefit me?
By providing you with a good understanding of the principles to do with the construction, functioning, maintenance and use of scaffolding, so that incidents and accidents can be avoided.

How will this course benefit my company?

By making scaffolding users aware of responsibility, legislation, safe use of scaffolding, assembly, and the scaffolding types.

What standards are referred to in this course?
§ 17-5 in ‘Regulations concerning the performance of work’

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

This course is aimed at personnel working in the energy and maritime sectors.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

Dropped objects can cause serious injuries as well as damage to assets and equipment. This course will give you a basic understanding of the common causes of dropped objects, their potential consequences and how they can be prevented.

How will this course benefit my company?

By ensuring that personnel are aware of the risk dropped objects present, their common causes and how they can be prevented.

Is there an assessment?

Yes

Accreditation:

CPD, IOSH 

- This course is approved by the Institution of Occupational Safety and Health (IOSH).

- IOSH is the world’s Chartered body for safety and health professionals. 

What that means:

• We are the largest membership body for health and safety professionals.

• We champion occupational safety and health causes and advocate for change.

• We advise governments, NGOs and policymakers.

• We facilitate safety and health awareness training in around 130 countries through IOSH Services Ltd, our wholly-owned trading arm.

• We commission research and set national and international standards.

• We shape the future of the profession.

Who is the course for?

This course is aimed at all personnel involved in lifting operations in the Oil and Gas Industry.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

This course provides learners with an awareness of the Lifting Operations and Lifting Equipment Regulations (LOLER) and gives an overview of industry best practice in relation to working with lifting equipment.

How will the course benefit my company?

This course will provide personnel with an overview of rigging and lifting operations.

What standards are referenced in the course?

• Lifting Operations and Lifting Equipment Regulations (LOLER) 

• Health and Safety at Work Act 

• Management of Health and Safety at Work Regulations 

• Provision and Use of Work Equipment Regulations (PUWER)

Is there an assessment?

Yes

Accreditation

This course is approved by the Institution of Occupational Safety and Health (IOSH).

IOSH is the world’s Chartered body for safety and health professionals.

What that means:

We are the largest membership body for health and safety professionals.

We champion occupational safety and health causes and advocate for change.

We advise governments, NGOs and policymakers.

We facilitate safety and health awareness training in around 130 countries through IOSH Services Ltd, our wholly-owned trading arm.

We commission research and set national and international standards.

We shape the future of the profession.

Who is the course for?

All personnel who may be exposed to naturally occurring radioactive material (NORM) in the workplace.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

This course aims to provide an awareness of NORM and provide best practices for managing NORM in oil and gas producing facilities.

How will the course benefit my company?

The course will benefit companies by ensuring that all members of personnel have an awareness of NORM and how it should be managed, which will help to reduce workplace accidents.

What standards are referenced in the course?

There are no standards or regulations referenced in this course.

Is there an assessment? 

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80% with 2 attempts.

Accreditation:

CPD, IOSH. 

This course is approved by the Institution of Occupational Safety and Health (IOSH).

IOSH is the world’s Chartered body for safety and health professionals. 

What that means:

• We are the largest membership body for health and safety professionals.

• We champion occupational safety and health causes and advocate for change.

• We advise governments, NGOs and policymakers.

• We facilitate safety and health awareness training in around 130 countries through IOSH Services Ltd, our wholly-owned trading arm.

• We commission research and set national and international standards.

• We shape the future of the profession.

Who is this course for?

Personnel requiring knowledge or awareness of HAZID.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to provide all personnel with solid hazard identification awareness to enable them to evaluate hazards quickly and effectively so that they can carry out their duties as safely as possible.

How will this course benefit my company?

By ensuring you are able to evaluate hazards quickly and effectively so that you can carry out your duties as safely as possible.

What standards are referred to in this course?

• Offshore Installations (Offshore Safety Directive) Regulations

• Control of Major Accident Hazards Regulations

• Directive 2013/30/EU on Safety of Offshore Oil and Gas Operations

• Title 30 of the Code of Federal Regulations (30 CFR) on Mineral Resources

Is there an assessment?

Once you have completed the course, there is an assessment with a pass mark of 80% and 2 attempts.

Who is this course for?

This HSE Chemicals training course is for personnel who require an introduction to or awareness of working with chemicals in the oil and gas industry.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

The course is for all those who work with or can come in contact with chemicals. The course is also intended for those who work on a general basis with workplace environment issues, purchasing, or transportation. The course will give the target group fundamental knowledge of safe use of chemicals.

How will this course benefit my company?

By ensuring you have fundamental knowledge of the safe use of chemicals.

What standards are referred to in this course?

• REACH

• The Working Environment Act 

• The Product Control Act 

• The Pollution Control Act

• The Chemical Labelling Regulations

• Regulations relating to Organisation, Management and Participation

• The Internal Control Regulations

• Performance of Work Regulations

• The Product Control Regulations

Is there an assessment?

Yes

Who is this course for?

All personnel who work with chemicals in the Oil and Gas Industry.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

This course provides learners with an in depth few on the use, management and control of chemicals in the Oil and Gas Industry and how to react in an emergency situation that has resulted from a chemical hazard.

How will this course benefit my company?

The course will benefit companies by ensuring that all personnel have an in depth view of industry best practice for working with chemicals, which will in turn, help keep those working with chemicals safe.

What standards are referred to in this course?

• Offshore Petroleum (Oil Pollution Prevention and Control) Regulations

• The Control of Substances Hazardous to Health (COSHH)

• Regulation, Evaluation, Authorisation and Restriction of Chemicals (REACH)

• United Nations Globally Harmonized System of Classification and Labelling of Chemicals (GHS)

• EU Classification, Labelling and Packaging (CLP) Regulation

• The GB CLP Regulation

• The Norwegian CLP Regulation, or

• The Hazard Communication Standard (HCS 2012)

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is the course for?

This eLearning course is aimed at individuals required to work using display screen equipment, such as a computer, laptop or tablet.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

This course will give you a basic understanding of the key health risks associated with display screen equipment and what you can do to mitigate them.

How will the coruse benefit my company?

By ensuring you are fully aware of how to avoid injury while working at your computer, you can help reduce the number of lost workdays and hours due to health issues. You will also help your company to comply with regulations on the use of display screen equipment.

What standards or regulations are referenced in the course?

• Health and Safety (Display Screen Equipment) Regulations (UK)
• The Workplace Regulations (Norway)
• Directive 90/270/EEC - display screen equipment (EU)

Is there an assessment?

Yes, there's a course assessment with a pass mark of 80% and 2 attempts.

What standards or regulations are referenced in the course

• Health and Safety (Display Screen Equipment) Regulations (UK)
• The Workplace Regulations (Norway)
• Directive 90/270/EEC - display screen equipment (EU)

Who is the course for?

This course is aimed at executives and managers to help them understand the strategic importance of CSR, align it with business goals, and make informed decisions related to sustainability and social responsibility.

Is previous experience required?

No previous experience is required.

How will the course benefit me?

Learners will acquire a thorough understanding of CSR principles and practices across social, environmental and governance dimensions. Participants will gain insights into global sustainability considerations, ensuring that they are well-informed about the broader impact of corporate activities.

How will the course benefit my company?

The course addresses undesirable activities and provides guidelines on ethical decision-making, helping a company mitigate potential legal, financial and reputational risks.

What standards are referenced in the course?

• The UN Guiding Principles on Business and Human Rights

• The International Labour Organization – ILO – Core Conventions

• The United Nations’ Principles for Responsible Investment (PRI)

• The Principles for Sustainable Insurance (PSI)

Is there an assessment?

Exam in TP with 80% pass mark with two attempts. 

Who is this course for?

This Working in Cold Environments course is for personnel who require an introduction to or awareness of working in cold climates.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

Working in cold environments can be a significant challenge for comfort and the ability to perform work tasks in a safe and efficient manner.

How will this course benefit my company?

By ensuring you are aware of the challenges involved in performing work tasks in cold environments.

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practices.

Is there an assessment?

Exam in Trainingportal with 80% pass mark with two attempts.

Who is this course for?

This HSE Introduction course is for all personnel who require an introduction to or awareness of HSE roles, responsibilities and duties in Norway.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

Health, safety and environment (HSE) considerations are vital to every organisation. Moreover, HSE requirements in the workplace are laid down in a range of laws, regulations and guidelines.

The employer has the primary responsibility for providing a suitable, safe working environment – and for ensuring sufficient training. This course aims to provide you with the baseline knowledge to be able to manage HSE challenges in your daily work.

How will this course benefit my company?

By ensuring you have sufficient knowledge of relevant HSE requirements, laws, regulations, guidelines and best practice.

What standards are referred to in this course?

NA

Is there an assessment?

Yes

Who is this course for?
This course is aimed at all personnel involved in mechanical isolations.

Is previous experience required?
No previous experience is required to complete this course.

How will this course benefit me?
This course aims to provide all relevant personnel with an overview of best practices in mechanical isolations.

How will this course benefit my company?

The course will benefit companies by ensuring that all relevant personnel have an understanding of mechanical isolation best practices, which will reduce accidents and injuries at work.

What standards are referred to in this course?
The United Kingdom’s UK’s Health and Safety Executive’s Regulation 253 ‘The safe isolation of plant and equipment’.

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?
This course is aimed at personnel who routinely process personal data, such as IT or HR staff.

Is previous experience required?
You do not need prior knowledge or experience to complete this course. 

How will this course benefit me?
Complying with the GDPR is mandatory for organisations processing personal data in the EU or EEA and for organisations processing the personal data of EU and EEA residents from abroad. This course introduces the principles and rights enshrined in the GDPR and the obligations organisations have to comply with it.  

How will this course benefit my company?
It will ensure you have an awareness of how you and your organisation must comply with the GDPR.

What standards are referred to in this course?
The EU General Data Protection Regulation (GDPR)

Is there an assessment?
Exam in TP with 80% pass mark with two attempts.

Who is the course for?
All personnel involved with confined space entry work

Is previous experience required?
No previous experience is required to complete this course.

How will the course benefit me?
This course aims to provide learners with an overview of industry best practice in relation to confined space entry work.

How will the course benefit my company?
The course will benefit companies by reducing confined space entry related injuries.

What standards or regulations are referenced in the course?
This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?
Yes, there is a course assessment with a pass mark of 80% with two attempts.

Who is this course for:
This course is designed for electrical personnel in various industries, including electricians, maintenance workers, facility managers, engineers, and safety professionals, to ensure they can work safely around electrical systems and equipment.

Is previous experience required?
This course is for qualified or instructed personnel.

How will this course benefit me?
By ensuring that the learner is equipped to identify and avoid electrical hazards, reducing the risk of electrical accidents and injuries.

How will this course benefit my company?
A reduction in workplace accidents related to electrical hazards that can lead to injuries, medical expenses, and potential legal liabilities.

What standards are referred to in this course?
FSE Regulations

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

This FSE High and Low Voltage Training course is suitable for everyone working on low and high voltage installations.

Is previous experience required?

You do not need prior knowledge or experience to complete this course, but it is assumed that you are competent in your designated role.

How will this course benefit me?

The course meets the requirements set in Section 7 of the ‘Safety Regulations for Work and Operation of Electrical Equipment and Installations – FSE’ which is that all relevant personnel undertake annual training and instruction in FSE. The course also provides the necessary training and instruction in first aid, focusing on electrical injuries, with the exception of the mandatory practical training in cardiopulmonary resuscitation (CPR).

The regulations of various authorities make FSE applicable to all those working with electricity, whether on board ship, on platforms or on land. This course is suitable for all, regardless of which industry you work in.

The authorities require that training in FSE and first aid in the event of electrical accidents is undertaken at least once a year. No more than 12 months shall elapse between training courses.

How will this course benefit my company?

By ensuring you have the knowledge and competence to be working on low and high voltage installations.

What standards are referred to in this course?

• Section 7 of the ‘Safety Regulations for Work and Operation of Electrical Equipment and Installations – FSE’

• The European standard

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is the course for?

All relevant offshore personnel.

Is previous experience required? 

No previous experience is required to complete this course. 

How will the course benefit me?

This course aims to give offshore personnel the knowledge required to understand the hazards and controls associated with working in an environment where they could potentially be exposed to H2S.

How will the course benefit my company?

By ensuring you are aware of the hazards and controls associated with H2S exposure, which will in turn reduce incidents and accidents offshore.

What standards are referenced in the course?

• Control of Substances Hazardous to Health Regulations (COSHH)

• Health and Safety at Work Act

• Offshore Installations (Offshore Safety Directive)

• Offshore Installations (Safety Case)

• Offshore Installations (Prevention of Fire and Explosion, and Emergency Response) (PFEER)

• Offshore Installations and Wells (Design and Construction) Regulations

• EH40 Workplace Exposure Limits (WELs)

Is there an assessment? 

Yes - There is a course assessment with an 80% pass mark and 2 attempts. 

Learning objectives

- Identify the physical properties of H2S

- Recognise the physiological effects of exposure to varying toxicity levels of H2S

- Recognise the responsibilities and duties of all personnel and their duties under current legislation

- Recognise the current legal occupational exposure limits for short- and long-term exposure periods relating to H2S

- Identify the various methods for detecting H2S

- Identify the various personal and respiratory protection equipment required for undertaking tasks in areas where H2S may be present

- Recognise the hazardous area classifications which may be encountered on an offshore installation

- Identify the formal requirements for H2S contingency plans on installations