Oil and Gas

Course catalogue

Category
Reset

Industry
Oil & Gas

Course type

E-learning course

Course provider

hits

19

OPITO Authorised Gas Tester (AGT) Course code: MUK-016 Course type: E-learning course Duration: 240 minutes Language: English Price: GBP 150,- The OPITO approved course can now be completed online. Due to the current COVID-19 situation, OPITO has altered the required processes to gain accreditation. You no longer have to attend an invigilation centre to complete this course, but must prove identity where required. Who is the course for? Personnel responsible for conducting atmospheric testing at the worksite. Is previous experience required? No previous experience is required How will the course benefit me? This course aims to provide the knowledge and techniques for carrying out gas testing. How will the course benefit my company? By ensuring that personnel are aware of the situations and circumstances in which a hazardous atmosphere could occur and the steps that should be taken in an emergency. What standards are referenced in the course? Health and Safety at Work Act CoSHH PFEER Management of Health and Safety at Work Regulations EH40 Workplace Exposure Limits (WELs) Confined Space Regulations Is there an assessment? Yes Please find pre-course information and learning outcomes here: https://mintra.com/implementing-maintaining-opito-standards-policy
Authorised Gas Tester Course code: MUK-017 Course type: E-learning course Duration: 275 minutes Language: English Price: NOK 1500,- Who is the course for? Personnel responsible for conducting atmospheric testing at the worksite. Is previous experience required? No previous experience is required. How will the course benefit me? This course aims to provide the knowledge and techniques for carrying out gas testing. How will the course benefit my company? By ensuring that personnel are aware of the situations and circumstances in which a hazardous atmosphere could occur and the steps that should be taken in an emergency. What standards are referenced in the course? Health and Safety at Work Act CoSHH PFEER Management of Health and Safety at Work Regulations EH40 Workplace Exposure Limits (WELs) Confined Space Regulations Is there an assessment? Yes
OPITO IMIST-F (International Minimum Industry Safety Training) - English Course code: IMIST-001 Course type: E-learning course Duration: 135 minutes Language: English Price: GBP 80,- This course uses Identity Verification; guidance on this process can be seen here Who is the course for? This eLearning course is aimed at individuals who work offshore, in any role, anywhere in the world. Is previous experience required? Learners must possess: a) A valid OPITO IMIST Initial or valid OPITO IMIST Further training certificate. Or b) Have previously worked offshore* *Learners are required to complete a declaration prior to course commencement confirming prior offshore work experience, including details of their last offshore trip, to include asset name, location and dates. How will the course benefit me? This course has been created with OPITO to set a global safety standard by applying a consistent level of safety awareness across nine safety critical areas. The knowledge gained in this course will help you to stay safe in your day to-day activities offshore. It will also outline some of the systems and procedures in place to manage everyday operations offshore. How will the course benefit my company? By ensuring that your safety knowledge is at or above the baseline level, your company can rest assured that you are able to work offshore safety and in compliance with regulations and company procedures. What standards are referenced in the course? This course is aligned with OPITO's International Minimum Industry Safety Training (IMIST) Further Standard (5313). As a global standard, the course is not written to meet any specific regional legislation but references industry best practices and standard operating procedures throughout. Is there an assessment? The course consists of nine mandatory units, each unit starts with an optional pre-assessment that checks existing knowledge. At the end of the pre-assessment, you will have either completed the unit or you will be presented with the content associated with the identified knowledge gaps. After this content review, an assessment featuring a new set of questions for the outstanding knowledge gaps, will be presented for completion. Each unit has a pass mark of 100% with unlimited attempts to complete. Once a unit is complete, the next unit will be unlocked. Completion of all nine units will generate your IMIST-F OPITO certificate automatically. The certificate is valid for four years, after which you will need to sit the course again to refresh your knowledge and earn a new certificate. Please find pre-course information and learning outcomes here: https://mintra.com/implementing-maintaining-opito-standards-policy
Code of Conduct Course code: MTP-061 Course type: E-learning course Duration: 30 minutes Language: English, Norwegian Price: GBP 35,- Who is this course for? This course is suitable for personnel at all levels within an organisation. Is previous experience required? No previous experience is required to complete this course. How will this course benefit me? The Code of Conduct course provides an overview of the common values that govern responsible corporate practice and personal behaviour in a company. How will this course benefit my company? By ensuring awareness of common values that govern responsible corporate practice and personal behaviour in a company. What standards are referred to in this course? • The US Foreign Corrupt Practices Act (FCPA) • The UK Bribery Act • The OECD Convention on Combating Bribery of Foreign Public Officials • The UN Convention Against Corruption • The Norwegian Equality and Anti-Discrimination Act • The EU antitrust law • The US antitrust law • The Norwegian Transparency Act • The International Bill of Human Rights • The UN Guiding Principles on Business and Human Rights • The International Labour Organization (ILO) Declaration on Fundamental Principles and Rights at Work • The UK Modern Slavery Act • The UK Employment Act • The UK Equality Act Is there an assessment? Yes
NORM Awareness Course code: MUK-027 Course type: E-learning course Duration: 20 minutes Language: English Price: NOK 500,- Who is the course for? All personnel who may be exposed to naturally occurring radioactive material (NORM) in the workplace. Is previous experience required? No previous experience is required to complete this course. How will the course benefit me? This course aims to provide an awareness of NORM and provide best practices for managing NORM in oil and gas producing facilities. How will the course benefit my company? The course will benefit companies by ensuring that all members of personnel have an awareness of NORM and how it should be managed, which will help to reduce workplace accidents. What standards are referenced in the course? There are no standards or regulations referenced in this course. Is there an assessment? Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80% with 2 attempts. Accreditation: CPD, IOSH. This course is approved by the Institution of Occupational Safety and Health (IOSH). IOSH is the world’s Chartered body for safety and health professionals. What that means: • We are the largest membership body for health and safety professionals. • We champion occupational safety and health causes and advocate for change. • We advise governments, NGOs and policymakers. • We facilitate safety and health awareness training in around 130 countries through IOSH Services Ltd, our wholly-owned trading arm. • We commission research and set national and international standards. • We shape the future of the profession.
DSE and Ergonomics Course code: MUK-099 Course type: E-learning course Duration: 30 minutes Language: English Price: NOK 500,- Who is the course for? This eLearning course is aimed at individuals required to work using display screen equipment, such as a computer, laptop or tablet. Is previous experience required? No previous experience is required to complete this course. How will the course benefit me? This course will give you a basic understanding of the key health risks associated with display screen equipment and what you can do to mitigate them. How will the coruse benefit my company? By ensuring you are fully aware of how to avoid injury while working at your computer, you can help reduce the number of lost workdays and hours due to health issues. You will also help your company to comply with regulations on the use of display screen equipment. What standards or regulations are referenced in the course? Health and Safety (Display Screen Equipment) Regulations (UK) The Workplace Regulations (Norway) Directive 90/270/EEC - display screen equipment (EU) Is there an assessment? Yes, there's a course assessment with a pass mark of 80% and 2 attempts. What standards or regulations are referenced in the course Health and Safety (Display Screen Equipment) Regulations (UK) The Workplace Regulations (Norway) Directive 90/270/EEC - display screen equipment (EU)
Basic Understanding of the Regulations Course code: MTP-053 Course type: E-learning course Duration: 180 minutes Language: English, Norwegian Price: NOK 4200,- Who is this course for: The target group for this Basic Understanding of the Regulations Training course is all employees within the Norwegian oil industry covered by the Norwegian Offshore Industry Authority’s area of responsibility. Is previous experience required? You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role. How will this course benefit me? The course content is designed to satisfy the requirement concerning competence in relation to the regulations by providing knowledge of the HSE regulations structure and content and giving examples of practical use. When working through the course, it is a good idea to remain online so you can make active use of the regulations. That way you will benefit most from the course. How will this course benefit my company? By ensuring you have the knowledge of competence in relation to the regulations by providing knowledge of the HSE regulations structure and content. What standards are referred to in this course? www.havtil.no Is there an assessment? Yes
Corporate Social Responsibility - CSR Course code: MTP-062 Course type: E-learning course Duration: 30 minutes Language: English, Norwegian Price: NOK 500,- Who is the course for? This course is aimed at executives and managers to help them understand the strategic importance of CSR, align it with business goals, and make informed decisions related to sustainability and social responsibility. Is previous experience required? No previous experience is required. How will the course benefit me? Learners will acquire a thorough understanding of CSR principles and practices across social, environmental and governance dimensions. Participants will gain insights into global sustainability considerations, ensuring that they are well-informed about the broader impact of corporate activities. How will the course benefit my company? The course addresses undesirable activities and provides guidelines on ethical decision-making, helping a company mitigate potential legal, financial and reputational risks. What standards are referenced in the course? • The UN Guiding Principles on Business and Human Rights • The International Labour Organization – ILO – Core Conventions • The United Nations’ Principles for Responsible Investment (PRI) • The Principles for Sustainable Insurance (PSI) Is there an assessment? Exam in TP with 80% pass mark with two attempts.
Working in Cold Environments Course code: MTP-036 Course type: E-learning course Duration: 45 minutes Language: English, Norwegian Price: NOK 1000,- Who is this course for? This Working in Cold Environments course is for personnel who require an introduction to or awareness of working in cold climates. Is previous experience required? You do not need prior knowledge or experience to complete this course. How will this course benefit me? Working in cold environments can be a significant challenge for comfort and the ability to perform work tasks in a safe and efficient manner. How will this course benefit my company? By ensuring you are aware of the challenges involved in performing work tasks in cold environments. What standards are referred to in this course? This course does not refer to specific legislation or standards but is written according to industry best practices. Is there an assessment? Exam in Trainingportal with 80% pass mark with two attempts.
Introduction to Oil and Gas Course code: MUK-028 Course type: E-learning course Duration: 60 minutes Language: English Price: NOK 1000,- Who is this course for? New personnel entering the Oil and Gas Industry including government agencies, authorities, operators, contractors and service companies. Is previous experience required? No previous experience is required to complete this course. How will this course benefit me? By introducing the history of oil and gas, giving an overview of the industry and presenting each key phase of the field life cycle. How will this course benefit my company? By ensuring employees have a basic understanding of the industry and are aware of each key phase. What standards are referred to in this course? OSPAR Convention Is there an assessment? Once you have completed the course, you will complete a course assessment with a pass mark of 80% and 2 attempts.
International Confined Space Entry Course code: MUK-188 Course type: E-learning course Duration: 35 minutes Language: English Price: NOK 500,- Who is the course for? All personnel involved with confined space entry work Is previous experience required? No previous experience is required to complete this course. How will the course benefit me? This course aims to provide learners with an overview of industry best practice in relation to confined space entry work. How will the course benefit my company? The course will benefit companies by reducing confined space entry related injuries. What standards or regulations are referenced in the course? This course does not refer to specific legislation or standards but is written according to industry best practice. Is there an assessment? Yes, there is a course assessment with a pass mark of 80% with two attempts.
Introduction to Tank Storage and Ullage Course code: MUK-060 Course type: E-learning course Duration: 30 minutes Language: English Price: NOK 500,- Who is this course for? Trainee Oil and Gas Operations Technicians / Deck Crew Is previous experience required? You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role How will this course benefit me? This course aims to provide an introduction to the use of storage tanks How will this course benefit my company? By ensuring you are introducted to the use of storage tanks What standards are referred to in this course? N/A Is there an assessment? Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.
HSE Waste management Course code: MTP-002 Course type: E-learning course Duration: 40 minutes Language: English, Norwegian Price: GBP 90,- Who is the course for? All personnel, on and offshore, who require an awareness of effective waste management. Is previous experience required? No previous experience is required. How will the course benefit me? To be able to manage waste properly, it is important that all personnel know the laws and regulations that apply and how to effectively minimise and manage waste. How will the course benefit my company? By providing personnel with the knowledge they need in order to minimise and manage waste effectively. What standards are referenced in the course? • The Pollution Control Act • ISO 14000 • EMAS (Eco-Management and Audit Scheme) • Forurensningsloven • ISO 14000 • EMAS (Eco-Management and Audit Scheme) Is there an assessment? End of course TP-assessment with a pass mark of 80% and 2 attempts.
Understanding Risk Course code: MTP-038 Course type: E-learning course Duration: 45 minutes Language: English, Norwegian Price: GBP 95,- Who is this course for? All employees at all levels of the organisation. Is previous experience required? You do not need prior knowledge or experience to complete this course. How will this course benefit me? Insufficient understanding of risk often leads to delayed projects, accidents and other unwanted incidents. This course provides a basic understanding of what risk is, how it can be managed and how understanding risk helps us make better decisions. How will this course benefit my company? By ensuring you are aware and have a basic understanding of what risk is and how to manage risk. What standards are referred to in this course? This course does not refer to specific legislation or standards but is written according to industry best practice. Is there an assessment? There is no exam upon completion of this course.
Mechanical Joint Integrity Course code: MUK-036 Course type: E-learning course Duration: 120 minutes Language: English Price: NOK 1500,- Who is this course for? This course is aimed at all personnel involved in mechanical joint operations, particularly those who are expected to undertake related duties in the workplace. Is previous experience required? You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role How will this course benefit me? This course aims to provide learners with an introduction to the principles of the equipment and technology associated with the bolting of flanged joints for pressurised systems. This course is intended to reflect industry """"best practice"""" for competence in relation to mechanical joint operations and applies to both the onshore and offshore Oil and Gas Industry. This course contains the following sections: Section 1: An Introduction to Mechanical Joint Integrity Section 2: Principles of Hand Torquing Section 3: Principles of Hydraulic Tensioning Section 4: Principles of Controlling Tightening How will this course benefit my company? By ensuring you are introduced to the principles of the equipment and technology associated with the bolting of flanged joints for pressurised systems What standards are referred to in this course? N/A Is there an assessment? Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.
Fire and Safety Systems Course code: MUK-141 Course type: E-learning course Duration: 15 minutes Language: English Price: NOK 500,- Who is this course for? Newcomers to the Oil and Gas Industry Is previous experience required? You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role How will this course benefit me? This course aims to provide a brief overview of fire and safety systems How will this course benefit my company? By ensuring you have a brief overview of fire and safety systems. What standards are referred to in this course? Health and Safety at Work Act The Management of Health and Safety at Work Regulations The Regulatory Reform (Fire Safety) Order The Fire (Scotland) Act Is there an assessment? Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.
Environmental Impact Assessment (EIA) Course code: MUK-139 Course type: E-learning course Duration: 30 minutes Language: English Price: NOK 500,- Who is this course for? All personnel working in the Oil and Gas Industry Is previous experience required? You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role How will this course benefit me? This course aims to provide an introduction to the Environmental Impact Assessment (EIA) process and explains the key stages in undertaking an EIA. How will this course benefit my company? By ensuring you are introduced to the Environmental Impact Assessment (EIA) process and explains the key stages in undertaking an EIA. What standards are referred to in this course? Environmental Impact Assessment (EIA) Environmental Statment (ES) Assessment of the Effects of Certain Public and Private Activities on the Environment EU Directive (as amended by Directive 97/11/EC Offshore Petroleum Production and Pipelines (Assessment of Environmental Effects) Regulations (EIA Regulations) EU Directive 2003/35/EC Offshore Petroleum Activities (Conservation of Habitats) Regulations Merchant Shipping (Oil Pollution Preparedness, Response and Co-operation Convention) Regulations Offshore Marine Conservation (Natural Habitats, & c.) Regulations Marine and Coastal Access Act and Marine (Scotland) Act Offshore Chemicals Regulations, and Offshore Combustion Installations (Prevention and Control of Pollution) Regulations Is there an assessment? Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.
Process Chemistry Course code: MUK-184 Course type: E-learning course Duration: 150 minutes Language: English Price: NOK 1500,- Who is this course for? Process Operators and Lab Technicians Is previous experience required? You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role How will this course benefit me? This course aims to provide an overview of the various types of process chemicals, their use and how they work. Section 1: Basic Introduction to Chemistry Section 2: Process Chemicals in the Oil and Gas Industry Section 3: Identifying the Risks in the Use of Process Chemicals Section 4: Managing Chemical usage How will this course benefit my company? By ensuring you have an overview of the various types of process chemicals, their use and how they work. What standards are referred to in this course? N/A Is there an assessment? Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.
Radar Awareness for the Oil and Gas Industry Course code: MUK-227 Course type: E-learning course Duration: 120 minutes Language: English Price: NOK 800,- Who is this course for? Offshore Marine Technicians Is previous experience required? You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role How will this course benefit me? This course provides an introduction to radar systems and their use within the Oil and Gas Industry. How will this course benefit my company? By ensuring you are aware of the how phase behaviour and multiphase flow regimes can impact on hydrocarbon delivery. What standards are referred to in this course? N/A Is there an assessment? Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Hits per page