Course catalogue

Who is the course for?

All personnel involved in the transportation or supporting of a load by hand or bodily force.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

The aim of this course is to increase learners’ awareness of the importance of safe manual handling operations and the risks involved with manual handling. The course also aims to outline best practices for the correct handling techniques for safe lifting; and for the pushing and pulling of loads.

How will the course benefit my company?

This course will benefit your company by reducing manual handling accidents.

What standards are referenced in the course?

• The Manual Handling Operations Regulations

• The Management of Health and Safety at Work Regulations

• Health and Safety at Work Act

• Health and Safety Executive (HSE)

Is there an assessment?

Yes

Learning objectives

- Recall what is meant by the term ‘manual handling’

- Identify the types of injuries that may result from manual handling operations

- Identify the legislation that is in place to regulate manual handling operations

- Identify the duties that are placed on employers and employees by the Manual Handling Operations Regulations

- Recognise the types of risk assessment which are relevant to manual handling operations

- Identify factors to consider when assessing manual handling operations to reduce the potential risks of injury

- Identify good handling techniques for the safe lifting of loads

- Identify good handling techniques for pushing and pulling loads

Accreditation:

This course is approved by the Institution of Occupational Safety and Health (IOSH).

IOSH is the world’s Chartered body for safety and health professionals. 

What that means:

• We are the largest membership body for health and safety professionals.

• We champion occupational safety and health causes and advocate for change.

• We advise governments, NGOs and policymakers.

• We facilitate safety and health awareness training in around 130 countries through IOSH Services Ltd, our wholly-owned trading arm.

• We commission research and set national and international standards.

• We shape the future of the profession.

Who is the course for?

All personnel who require an awareness of the hazards involved in working at height.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

By increasing your awareness of the potential hazards of working at height and the steps that can be taken to reduce your risk of injury.

How will the course benefit my company?

This course is aligned to industry best practice and aims to make personnel aware of the potential hazards of working at height and the controls that can be implemented to reduce risk.

What standards are referenced in the course?

Work at Height Regulations

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Accredidation:

- CPD IOSH

- This course is approved by the Institution of Occupational Safety and Health (IOSH).

- IOSH is the world’s Chartered body for safety and health professionals. 

What that means:

• We are the largest membership body for health and safety professionals.

• We champion occupational safety and health causes and advocate for change.

• We advise governments, NGOs and policymakers.

• We facilitate safety and health awareness training in around 130 countries through IOSH Services Ltd, our wholly-owned trading arm.

• We commission research and set national and international standards.

• We shape the future of the profession.

Who is the course for?

All personnel who may be exposed to asbestos at, or above, the permissible exposure levels, and personnel who perform housekeeping or maintenance operations in areas that have asbestos-containing materials and potential asbestos-containing materials.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

This course aims to provide learners with an understanding of the hazards associated with exposure to asbestos. It will also identify where asbestos may be found, how it can potentially affect your health, and what you need to do to protect yourself.

How will the course benefit my company?

This course will benefit a company by ensuring learners have the knowledge to protect themselves from exposure to asbestos.

Assessment Details

End of course assessment with a pass mark of 80% and 2 attempts.

Who is this course for?

This course is aimed at personnel working in the energy and maritime sectors.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

Dropped objects can cause serious injuries as well as damage to assets and equipment. This course will give you a basic understanding of the common causes of dropped objects, their potential consequences and how they can be prevented.

How will this course benefit my company?

By ensuring that personnel are aware of the risk dropped objects present, their common causes and how they can be prevented.

Is there an assessment?

Yes

Accreditation:

CPD, IOSH 

- This course is approved by the Institution of Occupational Safety and Health (IOSH).

- IOSH is the world’s Chartered body for safety and health professionals. 

What that means:

• We are the largest membership body for health and safety professionals.

• We champion occupational safety and health causes and advocate for change.

• We advise governments, NGOs and policymakers.

• We facilitate safety and health awareness training in around 130 countries through IOSH Services Ltd, our wholly-owned trading arm.

• We commission research and set national and international standards.

• We shape the future of the profession.

Who is this course for?

All personnel who could potentially be exposed to noise in the workplace. 

Is previous experience required?

No previous knowledge or experience is required to complete this course.

How will this course benefit me?

This course aims to provide personnel with the knowledge required to understand the hazards and controls associated with noise in the workplace.

How will this course benefit my company?

By ensuring personnel are aware of the hazards posed by noise in the workplace and the controls that should be put in place to minimise their exposure and reduce the risk of hearing loss.

What standards are referred to in this course?

Control of Noise at Work Regulations

Is there an assessment?

Yes

Accreditation:

This course is approved by the Institution of Occupational Safety and Health (IOSH).

IOSH is the world’s Chartered body for safety and health professionals. 

What that means:

We are the largest membership body for health and safety professionals.

We champion occupational safety and health causes and advocate for change.

We advise governments, NGOs and policymakers.

We facilitate safety and health awareness training in around 130 countries through IOSH Services Ltd, our wholly-owned trading arm.

We commission research and set national and international standards.

We shape the future of the profession.

Who is the course for? 

Personnel who are required to work with, or near to, substances hazardous to health.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

Many substances can cause harm to health if the appropriate precautions are not taken, including some substances that are not hazardous in themselves. This course will give you a basic overview of the COSHH regulations and how they help to protect workers. 

How will the course benefit my company? 

Ensuring personnel are familiar with the requirements of the COSHH Regulations will help to reduce the risk of accidents, incidents and injuries in the workplace.

What standards are referenced in the course?

The Control of Substances Hazardous to Health Regulations (COSHH).

Is there an assessment? 

Yes - This course has an assessment with a 80% pass mark and two attempts

Learning Objectives:

• Recognise why COSHH is important for protecting workers’ health

• Identify considerations for COSHH risk assessments

• Recognise control measures for mitigating risks from hazardous substances

Who is this course for?

All personnel across an organisation to set a benchmark of knowledge and awareness of risk assessment.

Is previous experience required?

No previous experience is required to complete this course. 

How will this course benefit me?

This course aims to introduce, develop and increase learners’ knowledge and awareness of the importance of Risk Assessment and how it can reduce the likelihood of accidents in the workplace.

How will this course benefit my company?

By ensuring you have the required knowledge and awareness of the importance of Risk Assessment and how it can reduce the likelihood of accidents in the workplace.

What standards are referred to in this course?

No standards or regulations are referenced in this course.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Accreditation:

This course is approved by the Institution of Occupational Safety and Health (IOSH).

IOSH is the world’s Chartered body for safety and health professionals.

What that means:

We are the largest membership body for health and safety professionals.

We champion occupational safety and health causes and advocate for change.

We advise governments, NGOs and policymakers.

We facilitate safety and health awareness training in around 130 countries through IOSH Services Ltd, our wholly-owned trading arm.

We commission research and set national and international standards.

We shape the future of the profession.

Who is the course for?

All personnel who are at risk from slips, trips and falls.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

This course aims to increase learners’ awareness of the risks, and consequences, of slips, trips and falls in the workplace and the control measures and steps that can be taken to reduce the risk of slips, trips and falls, based on industry best practice.

How will the course benefit my company?

This course will benefit companies' by reducing slip, trip and fall injuries among personnel.

What standards are referenced in the course?

• Health and Safety at Work Act

• Management of Health and Safety at Work Regulations 

• Workplace (Health, Safety and Welfare) Regulations 

• Health and Safety Executive (HSE)

Is there an assessment?

Course assessment with a 80% pass mark and two attempts.

Accreditation

This course is approved by the Institution of Occupational Safety and Health (IOSH).

IOSH is the world’s Chartered body for safety and health professionals. 

What that means:

• We are the largest membership body for health and safety professionals.

• We champion occupational safety and health causes and advocate for change.

• We advise governments, NGOs and policymakers.

• We facilitate safety and health awareness training in around 130 countries through IOSH Services Ltd, our wholly-owned trading arm.

• We commission research and set national and international standards.

• We shape the future of the profession.

Who is the course for?

This course is aimed at all personnel involved in lifting operations in the Oil and Gas Industry.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

This course provides learners with an awareness of the Lifting Operations and Lifting Equipment Regulations (LOLER) and gives an overview of industry best practice in relation to working with lifting equipment.

How will the course benefit my company?

This course will provide personnel with an overview of rigging and lifting operations.

What standards are referenced in the course?

• Lifting Operations and Lifting Equipment Regulations (LOLER) 

• Health and Safety at Work Act 

• Management of Health and Safety at Work Regulations 

• Provision and Use of Work Equipment Regulations (PUWER)

Is there an assessment?

Yes

Accreditation

This course is approved by the Institution of Occupational Safety and Health (IOSH).

IOSH is the world’s Chartered body for safety and health professionals.

What that means:

We are the largest membership body for health and safety professionals.

We champion occupational safety and health causes and advocate for change.

We advise governments, NGOs and policymakers.

We facilitate safety and health awareness training in around 130 countries through IOSH Services Ltd, our wholly-owned trading arm.

We commission research and set national and international standards.

We shape the future of the profession.

Who is the course for?

All personnel who may be exposed to naturally occurring radioactive material (NORM) in the workplace.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

This course aims to provide an awareness of NORM and provide best practices for managing NORM in oil and gas producing facilities.

How will the course benefit my company?

The course will benefit companies by ensuring that all members of personnel have an awareness of NORM and how it should be managed, which will help to reduce workplace accidents.

What standards are referenced in the course?

There are no standards or regulations referenced in this course.

Is there an assessment? 

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80% with 2 attempts.

Accreditation:

CPD, IOSH. 

This course is approved by the Institution of Occupational Safety and Health (IOSH).

IOSH is the world’s Chartered body for safety and health professionals. 

What that means:

• We are the largest membership body for health and safety professionals.

• We champion occupational safety and health causes and advocate for change.

• We advise governments, NGOs and policymakers.

• We facilitate safety and health awareness training in around 130 countries through IOSH Services Ltd, our wholly-owned trading arm.

• We commission research and set national and international standards.

• We shape the future of the profession.

Who is this course for?

All personnel who works in a role within the Oil and Gas Industry that may have a direct impact on the environment.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

This course aims to increase learners’ awareness of the environmental aspects and impacts related to the Oil and Gas Industry and the actions that can be taken to minimise environmental damage.

How will this course benefit my company?

This course will benefit a company by helping personnel become aware of actions that can be taken to reduce environmental damage.

What standards are referred to in this course?

BEIS (formally DECC))

Oil Spill Prevention and Response Advisory Group

Health and Safety Executive (HSE) 

ISO 14001 Environmental Management Systems

Is there an assessment?

Yes

Accreditation:

This course is approved by the Institution of Occupational Safety and Health (IOSH).

IOSH is the world’s Chartered body for safety and health professionals.

What that means:

We are the largest membership body for health and safety professionals.

We champion occupational safety and health causes and advocate for change.

We advise governments, NGOs and policymakers.

We facilitate safety and health awareness training in around 130 countries through IOSH Services Ltd, our wholly-owned trading arm.

We commission research and set national and international standards.

We shape the future of the profession.

Who is this course for?

Personnel who are involved in work processes that can result in hand-arm vibration exposure.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

This course will benefit learners by making them aware of the risks of hand-arm vibration and the effects that it can cause.

How will this course benefit my company?

This course will benefit companies by ensuring that personnel have an understanding of the risks of hand-arm vibration and in turn will reduce the number of injuries that result from this.

Is there an assessment? 

Yes

Who is this course for?

All personnel within the Oil and Gas Industry.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

This course aims to increase learners’ awareness of the importance of Personal Protective Equipment (PPE), and outline the legal duties and responsibilities of employers and employees in relation to PPE.

How will this course benefit my company?

The course will benefit companies by reducing PPE related incidents and injuries. 

What standards are referred to in this course?

Control of Lead at Work Regulations 

Ionising Radiations Regulations 

Control of Asbestos at Work Regulations 

Control of Substances Hazardous to Health Regulations 

Control of Noise at Work Regulations

Personal Protective Equipment at Work Regulations

Is there an assessment?

Yes.

Accreditation:

This course is approved by the Institution of Occupational Safety and Health (IOSH). 

IOSH is the world’s Chartered body for safety and health professionals.

What that means:

We are the largest membership body for health and safety professionals.

We champion occupational safety and health causes and advocate for change.

We advise governments, NGOs and policymakers.

We facilitate safety and health awareness training in around 130 countries through IOSH Services Ltd, our wholly-owned trading arm.

We commission research and set national and international standards.

We shape the future of the profession.

Who is this course for?

All personnel who work with chemicals in the Oil and Gas Industry.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

This course provides learners with an in depth few on the use, management and control of chemicals in the Oil and Gas Industry and how to react in an emergency situation that has resulted from a chemical hazard.

How will this course benefit my company?

The course will benefit companies by ensuring that all personnel have an in depth view of industry best practice for working with chemicals, which will in turn, help keep those working with chemicals safe.

What standards are referred to in this course?

• Offshore Petroleum (Oil Pollution Prevention and Control) Regulations

• The Control of Substances Hazardous to Health (COSHH)

• Regulation, Evaluation, Authorisation and Restriction of Chemicals (REACH)

• United Nations Globally Harmonized System of Classification and Labelling of Chemicals (GHS)

• EU Classification, Labelling and Packaging (CLP) Regulation

• The GB CLP Regulation

• The Norwegian CLP Regulation, or

• The Hazard Communication Standard (HCS 2012)

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?
Production operators.

Is previous experience required?
No previous experience is required to complete this course.

How will this course benefit me?
This course aims to provide appropriate knowledge of the techniques required for carrying out pressure testing and leak testing in the workplace.

How will this course benefit my company?

By ensuring you have appropriate knowledge of the techniques required for carrying out pressure testing and leak testing in the workplace.

What standards are referred to in this course?
This course does not refer to specific legislation or standards.

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Accreditation:

This course is approved by the Institution of Occupational Safety and Health (IOSH).

IOSH is the world’s Chartered body for safety and health professionals.

What that means:

We are the largest membership body for health and safety professionals.

We champion occupational safety and health causes and advocate for change.

We advise governments, NGOs and policymakers.

We facilitate safety and health awareness training in around 130 countries through IOSH Services Ltd, our wholly-owned trading arm.

We commission research and set national and international standards.

We shape the future of the profession.

Who is the course for?

All personnel who may be exposed to nitrogen in the workplace.

Is previous experience required?

No previous experience is required to complete this course. 

How will the course benefit me?

This course aims to provide learners with an awareness of nitrogen and provide best practice for work involving nitrogen in oil and gas producing facilities.

How will the course benefit my company?

The course will benefit companies by ensuring that all relevant personnel understand the best practice when working with nitrogen in oil and gas producing facilities.

What standards are referenced in the course?

Control of Substances Hazardous to Health (COSHH) Regulations 

Health and Safety Executive (Health and Safety Executive (HSE)

The Occupational Safety and Health Administration (OSHA)

Is there an assessment?

Yes

Accreditation:

This course is approved by the Institution of Occupational Safety and Health (IOSH).

IOSH is the world’s Chartered body for safety and health professionals.

What that means:

We are the largest membership body for health and safety professionals.

We champion occupational safety and health causes and advocate for change.

We advise governments, NGOs and policymakers.

We facilitate safety and health awareness training in around 130 countries through IOSH Services Ltd, our wholly-owned trading arm.

We commission research and set national and international standards.

We shape the future of the profession.

Who is the course for?

All personnel who work with machinery, tools and appliances.

Is previous experience required?

No previous experience is required to complete this course. 

How will the course benefit me?

This course aims to provide learners with an awareness of the requirements of the Provision and Use of Work Equipment Regulations (PUWER) and how they apply in the workplace.

How will the course benefit my company?

This course will benefit companies’ by providing personnel with an awareness of PUWER. 

What standards are referenced in the course?

Provision and Use of Work Equipment Regulations (PUWER)

Health and Safety at Work Act

Management of Health and Safety at Work Regulations

Is there an assessment?

Yes

Accreditation

This course is approved by the Institution of Occupational Safety and Health (IOSH).

IOSH is the world’s Chartered body for safety and health professionals.

What that means:

• We are the largest membership body for health and safety professionals.

• We champion occupational safety and health causes and advocate for change.

• We advise governments, NGOs and policymakers.

• We facilitate safety and health awareness training in around 130 countries through IOSH Services Ltd, our wholly-owned trading arm.

• We commission research and set national and international standards.

• We shape the future of the profession.

Who is this course for?
This course is aimed at all personnel involved in mechanical isolations.

Is previous experience required?
No previous experience is required to complete this course.

How will this course benefit me?
This course aims to provide all relevant personnel with an overview of best practices in mechanical isolations.

How will this course benefit my company?

The course will benefit companies by ensuring that all relevant personnel have an understanding of mechanical isolation best practices, which will reduce accidents and injuries at work.

What standards are referred to in this course?
The United Kingdom’s UK’s Health and Safety Executive’s Regulation 253 ‘The safe isolation of plant and equipment’.

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

Personnel throughout an organisation which operates within major accident hazard sectors.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to provide learners with an introduction to major accident hazards.

How will this course benefit my company?

By ensuring you have had an introduction to major accident hazards.

What standards are referred to in this course?

The Offshore Installations (Safety Case) Regulations

The Offshore Installation and Pipeline Works (Management and Administration) Regulations (MAR)

The Offshore Installations (Prevention of Fire andf Explosion and Emergency Response) Regulations (PFEER)

The Offshore Installations and Wells (Design and Contruction) Regulations (DCR)

The Control of Major Accident Hazards Regulations (COMAH)

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

This course is aimed towards all personnel who use abrasive wheels in the workplace.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

This course aims to provide all relevant personnel with the knowledge required to understand the hazards and controls associated with the use of abrasive wheels.

How will this course benefit my company?

The course will benefit companies by providing personnel with knowledge of how to avoid risks and hazards when using abrasive wheels, subsequently reducing accidents and injuries in the workplace.

What standards are referred to in this course? 

• Provision and Use of Work Equipment Regulations (PUWER) 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.