Oil and Gas

Course catalogue

hits
219
Course code: OLF-088/090
Course type: E-learning course
Duration: 1 hour
Language: English, Norwegian
Price: NOK 160,-

WP & SJA provides a basic introduction for all personnel working offshore on the Norwegian continental shelf. The course consists of two main parts,  WP; Work Permit and SJA; Safe Job Analysis.

The course has been developed using the Norwegian Oil Industry Association's (Norwegian oil and gas) guidelines 088 and 090.

Price for company members of the Norwegian Oil and Gas Association: NOK 80,-


Course Content
- Background for the introduction of new common forms and models
- Basic knowledge of Work Permits and Safe Job Analysis
- How to fill in th eforms and description of work processes

Course code: MTP-010
Course type: E-learning course
Duration: 1 hour
Language: Norwegian
Price: NOK 1150,-

This course provides a basic review and update of knowledge of rigging operations in accordance with applicable standards and regulations.

All rigging operations shall be performed according to applicable safety regulations. These specifications are stipulated in the NORSOK R-003 standard and in the Regulations for using work equipment.

Only personnel who have documented rigger training may perform rigging operations. This course provides a basic review and update of knowledge of rigging operations in accordance with applicable standards and regulations.

 

Course Content

-Introduction
-Rigging operations in general
-Fastening
-Handling loads
-Using beam clips
-Clamps and travelling clamps

Course code: MTP-011
Course type: E-learning course
Duration: 2,5 hours
Language: Norwegian
Price: NOK 1150,-

All usage, storage, and inspections of lifting equipment shall be in accordance with the producer’s instructions and requirements stipulated in the NORSOK R-003 standard.  Lifting equipment shall be used only by personnel who have and can document competence in lifting operations.

 

This course provides a basic review and update of knowledge of lifting equipment in accordance with applicable standards.

The course requires completed modules 0-1.1 in the basic slinger course, fall safety, and simple lifting equipment modules 0-2.2.  In addition, practical experience slinging loads is required.

 

Course Content

-General information about lifting and lifting equipment
-Information about marking and tagging, material properties, correct usage and scrapping criteria for the following lifting equipment: fibre straps and big bags, chain slings, steel straps, shackles, eyebolts and eye nuts, lifting caps and turnbuckles, load bearers
-Using lifting equipment, fall safety and specific lifting equipment.

Course code: MTP-035
Course type: E-learning course
Duration: 1 hour 10 minutes
Language: Norwegian, English, Br ...
Price: NOK 2100,-

Piracy and armed robbery is a real threat to seafarer’s onboard ships and mobile units at sea. 1st January 2014 a requirement about seafarer’s security training was put in force for all ships to which the ISPS Code applies.

This training programme in Ship Security Awareness has been approved by the Norwegian Maritime Authority. The training consists of an e-learning course and the performance of certain on board activities described in a checklist. The client’s approved instructors must sign completed checklists for each trainee.  When the training is completed a certificate is issued by the Norwegian Maritime Authority.

 

Learning Objectives in the e-learning course

- Security awareness
- International maritime security policy
- Security measures and procedures aboard
- Security threats
- After an attack
- Final test

Contact Mintra Trainingportal for more information about how to complete the training.
Course code: OLF-088/090-F
Course type: E-learning course
Duration: 1 hour 10 minutes
Language: English, Norwegian
Price: NOK 160,-

This course builds upon the basic “Work permits and safe job analysis” course, and is particularly focused on roles and responsibilities in this context. The purpose of this learning initiative is to contribute to ensuring a common overall understanding and best practice for personnel involved in the work permits system.

 

The course can be used as a part of the company’s internal training.

 

The purpose of this learning initiative is to contribute to ensuring a common overall understanding and best practice for personnel involved in the work permits system. The course can be used as a part of the company’s internal training.

 

Course Content
The course consists of seven modules, one for each of the roles included in the OLF guidelines 088/work permits system:
- Applicant
- Area and Operations Supervisor
- HSE Function
- Platform Manager
- Area Technician
- Executing Skilled Worker
- CCR Technician
Course code: MTP-030
Course type: E-learning course
Duration: 20 minutes
Language: English, Norwegian
Price: NOK 450,-

The course gives an introduction to the Compliance and Leadership model. The model describes how to plan, carry out and evaluate deliveries in order to ensure safe, consistent and high quality operations.

 

Course content:
- Introduction
- The steps in the model
- The role of the manager
- Learning – individually, in the team, and collectively
Course code: MTP-014
Course type: E-learning course
Duration: 1 hour 30 minutes
Language: English, Norwegian
Price: NOK 1300,-

This course provides an understanding of good downhole practices and a basic understanding of what can cause problems during drilling and downhole operations.

 

The interactive e-learning program, “Downhole Mechanisms and Operational Practice”, can be used both as a job-support tool/reference work and as an e-learning course for good downhole practices.

 

The object of the learning program is to increase knowledge and competence for personnel involved in downhole operations, and to develop positive attitudes toward following best practices, so we can reduce/avoid unwanted incidents related to drilling and downhole operations, including technical sidetracks.

 

Course Content

- Hole Cleaning

- Lost Circulation

- Hole Enlargement

- Exam

Course code: MTP-031
Course type: E-learning course
Duration: 4 hours
Language: English, Norwegian
Price: NOK 500,-

This course provides insight into, and training for, all conditions that influence safe operations on a helicopter deck. The course is built on the guidebook "Helideck Manual", developed by the Norwegian Oil and Gas Association.

Course code: OLF-091
Course type: E-learning course
Duration: 1 hour
Language: Norwegian
Price: NOK 135,-

Price for a company member of the OLF: NOK 75,-

Course code: MUK-001
Course type: E-learning course
Duration: 30 minutes
Language: English
Price: NOK 500,-

Confined Space Entry aims to provide learners with an overview of industry best practice in relation to confined space entry work. The course has the following Learning Objectives:


- Explain what is meant by a Confined Space
- Give examples of Confined Space
- Describe the dangers that can be caused by Confined Space Entry work
- Identify the key pieces of legislation that help to control Confined Space Entry work
- Explain how to avoid entering Confined Spaces
- Explain the importance of having a Safe System of Work in place
- Describe individual roles and responsibilities involved in Confined Space Entry work
- Explain the requirements for gas testing
- Identify acceptable levels for atmospheric test results
- Give examples of Confined Space Entry site safety equipment
- Explain the actions to take in an emergency situation
- Explain Confined Space Entry alarm procedures

Course code: OLF-088/090
Course type: E-learning course
Duration: 1 hour
Language: Portuguese
Price: NOK 160,-

O curso de Permissão de Trabalho (PT) e Analise de Trabalho Seguro (ATS) é uma iniciativa do projeto “Trabalhando junto pela segurança”. O curso está disponível em inglês, norueguês e português, e leva cerca de uma hora ao todo.

Course code: MUK-074
Course type: E-learning course
Duration: 30 minutes
Language: English
Price: NOK 500,-

Course Goal: To provide learners with an awareness of the potential environmental impacts associated with oily discharges to sea, as well as the legislation and control measures that are in place to minimise these impacts.

 

Learning Objectives

 

LO1 Identify the different types of oily discharges to sea and explain how to minimise them

LO2 Identify that produced water is the main source of oily discharges 

LO3 Explain the difference between planned operational discharges and accidental releases 

LO4 Explain what is meant by ‘produced water’ and describe how to minimise it

LO5 Identify the environmental impacts associated with oily discharges 

LO6 Describe the legislative controls that are in place to control oily discharges

LO7 Give examples of what you can do to minimise environmental damage from oily discharges 

 

Course code: MTP-009
Course type: E-learning course
Duration: 2,5 hours
Language: Norwegian
Price: NOK 1150,-

The NORSOK R-003 standard, Safe Use of Lifting Equipment is the industry standard for operating lifting equipment on the Norwegian continental shelf.


The course, “Safe Use of Offshore Cranes”, builds on NORSOK R-003 and is an important means for satisfying governmental regulations for maintaining and verifying competence in the safe use of lifting equipment.


The course focuses ongood work practices, as well as good attitudes and understanding of safety for crane operations, in accordance with the NORSOK R-003 standard.


Course Content:
-Introduction
-Rolls and responsibilities
-Planning and supervising
-Communication
-Supply vessels
-Load bearers
-Chemicals
-Lifting to and from the rig floor
-Using guy wires
-Lifting drilling pipes and casings
-Assembly and disassembly lifts
-Lifting scaffolding material and planks
-Operating blind
-Personnel lifts

Course code: MTP-036
Course type: E-learning course
Duration: 45 minutes
Language: English, Norwegian
Price: NOK 1000,-

Working in cold environments can be a significant challenge for comfort and the ability to perform work tasks in a safe and efficient manner. In this course you can learn about:

• Effects of cold
• Risk to health and performance
• Planning and risk reduction
• Clothing

Course code: MUK-003
Course type: E-learning course
Duration: 45 minutter
Language: Engelsk
Price: NOK 500,-

This course aims to give offshore personnel the knowledge required to understand the hazards and controls associated with working in an environment where they could potentially be exposed to H2S.


Learning Objectives
- Explain the physical properties and sources of H2S, and identify the areas on an offshore installation where you would expect to encounter H2S
- Explain the physiological effects of exposure to varying toxicity levels of H2S
- Explain the responsibilities and duties of all personnel and their duties under current legislation
- Explain the current legal occupational exposure limits for short and long term exposure periods relating to H2S
- Describe the various methods for detecting H2S
- Describe the various personal and respiratory protection equipment required for undertaking tasks in areas where H2S may be present
- Explain the hazardous area classifications which may be encountered on an offshore installation and the associated control measures required
- Explain the formal requirement for H2S contingency plans on installations
- Identify the different alarms encountered offshore and the emergency and evacuation procedures that should be followed

Course code: MTP-053
Course type: E-learning course
Duration: 2,5-3 hours
Language: Norwegian / English
Price: NOK 4200,-


The course content is designed to satisfy the requirement concerning competence in relation to the regulations by providing knowledge of the HSE regulations structure and content and giving examples of practical use.

Course contents:

•    About the regulations
•    Structure
•    Acts
•    Regulations
•    Selected issues
•    The Petroleum Safety Authority Norway
•    Practical use

When working through the course, it is a good idea to remain on the net so you can make active use of the regulations. That way you will benefit most from the course.

In order to have the course approved, you must answer 80% of the questions in the test correctly. The test is made available after you have completed the course.

A great deal of the course content has been imported from Lovdata and the Petroleum Safety Authority website.

The regulations are readily available on the internet:
www.lovdata.no
www.psa.no

Proactima offers following collections in drilling/well , compliance/culture, development projects/modifications and more on request. Contact learning@proactima.com

Course code: MUK-091
Course type: E-learning course
Duration: 1 hour 30 minutes
Language: English
Price: NOK 1000,-

This course contains seven modules:

 

Module 1: Introduction

 

Module 2: Process Flow Systems

 

Module 3: Process Flow Diagrams

 

Module 4: Piping and Instrument Diagrams

 

Module 5: Reading Process Diagrams

 

Module 6: Process Systems

 

Module 7: Instrument Systems

Course code: MUK-168
Course type: E-learning course
Duration: 2 hours
Language: English
Price: NOK 1500,-

Course Goal: This course aims to provide learners with an overview of well integrity and its importance in maintaining safe and secure operations

 

Target Audience: All relevant personnel

 

This course contains the following sections:

 

Section 1: Well Integrity Overview

Section 2: Well Categorisation and Well Barriers

Section 3: Well Design and the Cementing Process

Section 4: Human Factors in Well Integrity

Course code: OLF-GSK-REP
Course type: Classroom course
Duration: 2 days
Language: Norwegian
Price: From NOK 7500,-

The object of this course is to ensure that course participants maintain and update their knowledge of basic safety and emergency response.

 

After completing the course the students should have refreshed and upgraded their knowledge and proficiency in:

- The use of handheld fire extinguishers

- Lifesaving first aid

- Using an escape chute

- Correct use of a rescue suit with breathing apparatus

- Helicopter evacuation (HUET) (see comment under miscellaneous)

 

This course is valid for 48 months.

Course code: MUK-025
Course type: E-learning course
Duration: 30 minutes
Language: English
Price: NOK 500,-

Course goal: This course aims to provide awareness of how gas hydrates may be formed and the effects that they can have on pipeline flow assurance. The course examines what hydrates are, how they are formed and their molecular structure. It discusses flow assurance, details the risks of pipeline plugging by hydrates, and outlines the various methods of controlling hydrate formation

Target Audience: Process Operators

Learning Objectives

LO1 Identify what hydrates are
LO2 Describe how hydrates are formed
LO3 Describe the structure of hydrates
LO4 Describe flow assurance
LO5 Identify the potential for hydrate plugging
LO6 Describe the methods used to control hydrate formation
LO7 Identify methods of hydrate control using chemical injection
LO8 Describe new technology for the control of hydrates

Hits per page
| 1 ... |