Oil and Gas

Course catalogue

hits
49
Course code: MTP-016
Course type: E-learning course
Duration: 4 hours
Language: Norwegian, Polish, Eng ...
Price: NOK 1200,-

The e-learning course, “Fire Prevention during Hot Work”, has been quality controlled by the Norwegian Fire Prevention Association and designed is to satisfy the requirements set by the insurance industry.

 

The course aims to reduce the number of fires caused by hot work and improve knowledge about the risk of fire during hot work.

 

NB! Before we can inform the Norwegian Fire Prevention Association that you have completed the course, we must have confirmation that you have received fire extinguishing training during the last two years.

 

Participants who pass the exam will be issued a certificate from the Norwegian Fire Prevention Association. The certificate must be renewed every 5 years.

 

Course Content

The course focuses on duties and responsibilities during hot work and is divided into the following topics: 

- What is Hot Work?

- Fire Theory

- Your Responsibilities

- Before Hot Work

- During Hot Work

- After Hot Work

- What Do You Do in Case of Fire?

- Fire Extinguishing Equipment and Methods

Course code: MTP-041-FT
Course type: E-learning course
Duration: 2 hours 30 minutes
Language: Norwegian / English
Price: NOK 1150,-

The fast track version of FSE Offshore - Low and High Voltage starts with a pre-test which checks the  participant's knowledge of FSE. Depending on the answers you give, you will get a FSE course that is tailored to the level of knowledge that is revealed in the pre-test.


The course meets the requirements set in § 7 of the "Safety Regulations for Work and Operation of Electrical Equipment and Installations- FSE", that relevant personnel shall be given annual training in FSE. The course also provides training and instruction in first aid, except for cardiopulmonary resuscitation (CPR).


Throughout the course the focus is on attitudes and the individual's responsibility to follow the regulations. FSE training is about knowledge of regulations and instructions, but it is equally important for the individual to understand why we have these regulations. To succeed in getting the individual to understand the importance of working safely, it is crucial that electrical safety is developing in the right direction and that the number of accidents is reduced.


In order to meet the requirement for being able to provide first aid in the event of electrical accidents, you also need to complete yearly practical training in CPR (mouth-to-mouth and heart compressions).


The course with fast track is suitable for for all, but is particularly practical for those who are going to do refresher training in FSE. The version without fast track is to be found in the course catalogue with the code MTP-041.

Course code: APP-001
Course type: E-learning course
Duration: 7 hours
Language: Norwegian
Price: NOK 4200,-

This course looks at electrical installations in explosive atmospheres. The object of the course is to enable those working in explosive atmospheres to perform their work properly and safely.


This course fulfils the requirements for personnel working in explosive atmospheres. Theory is taken from CENELEC and IEC norms.


Text, images, videos, animations and 3D simulations will help give you a better understanding of explosive atmospheres and their particular characteristics.

Course code: MTP-043-FT
Course type: E-learning course
Duration: 2 hours
Language: English, Norwegian
Price: NOK 650,-

The fast track version of  FSE Offshore - Low Voltage starts with a pre-test which checks the  participant's knowledge of FSE. Depending on the answers you give, you will get a FSE course that is tailored to the level of knowledge that is revealed in the pretest.


The course meets the requirements set in § 7 of the "Safety Regulations for Work and Operation of Electrical Equipment and Installations- FSE", that relevant personnel shall be given annual training in FSE. The course also provides training and instruction in first aid, except for cardiopulmonary resuscitation (CPR).


Throughout the course the focus is on attitudes and the individual's responsibility to follow the regulations. FSE training is about knowledge of regulations and instructions, but it is equally important for the individual to understand why we have these regulations. To succeed in getting the individual to understand the importance of working safely, it is crucial that electrical safety is developing in the right direction and that the number of accidents is reduced.


In order to meet the requirement for being able to provide first aid in the event of electrical accidents, you also need to complete yearly practical training in CPR (mouth-to-mouth and heart compressions).


The course with fast track is suitable for for all, but is particularly practical for those who are going to do refresher training in FSE. The version without fast track is to be found in the course catalogue with the code MTP-043.

Course code: MUK-010
Course type: E-learning course
Duration: 30 minutes
Language: English
Price: NOK 500,-

Dette kurset er kun tilgjengelig på engelsk.


This course provides learners with an awareness of the hazards involved in working at height and gives an overview of industry best practice in relation to working at height.


Course Content
- Define what is meant by "working at height"
- Identify the key pieces of legislation that help to control work at height
- Explain the duties that are placed on employers and employees by the Work at Height Regulations
- Describe the hazards involved in working at height
- Explain the importance of planning and risk assessment
- Describe the hierarchy of control for managing and selecting equipment for work at height
- Identify the factors that should be considered when assessing the method to be used for working at height
- Describe the main methods of access for working at height and give examples of the different types of working at height equipment
- Describe the rules for working with ladders
- Describe the rules for working with scaffolds
- Explain the importance of inspecting equipment

Course code: MTP-043
Course type: E-learning course
Duration: 2 hours
Language: English, Norwegian
Price: NOK 650,-

FSE Offshore - Low Voltage is a FSE course targeting personell working offshore with low voltage installations. The course focuses on FSE offshore and meets the requirements set in § 7 of the "Safety Regulations for Work and Operation of Electrical Equipment and Installations- FSE", that relevant personnel shall be given annual training in FSE. The course also provides training and instruction in first aid, except for cardiopulmonary resuscitation (CPR).

Throughout the course the focus is on attitudes and the individual's responsibility to follow the regulations. FSE training is about knowledge of regulations and instructions, but it is equally important for the individual to understand why we have these regulations. To succeed in getting the individual to understand the importance of working safely, it is crucial that electrical safety is developing in the right direction and that the number of accidents is reduced.

In order to meet the requirement for being able to provide first aid in the event of electrical accidents, you also need to complete yearly practical training in CPR (mouth-to-mouth and heart compressions).

This course does not have the fast track function with pretest. The fast track version is to be found in the course catalogue with the code MTP-043-FT.

 

Course code: MUK-018
Course type: E-learning course
Duration: 30 minutes
Language: English
Price: NOK 500,-

This course aims to provide all relevant personnel with the knowledge required to understand the hazards and controls associated with the use of abrasive wheels.

Course Content
-Explain what is meant by the term ‘Abrasive Wheel’
-Explain the legislative requirements for abrasive wheels
-Give examples of different types of abrasive wheels
-Explain how abrasive wheels operate
-Explain the importance of using guards during grinding operations
-Explain the requirements for portable and hand-held grinding machines
-Explain the main hazards of grinding operations
-Give examples of common problems faced when using abrasive wheels
-Explain what the PPE requirements are during grinding operations
-Identify the safety measures that must be in place during grinding operations

Course code: MTP-052
Course type: E-learning course
Duration: 2 hours
Language: Norwegian / English
Price: NOK 650,-

The course meets the requirements set in § 7 of the "Safety Regulations for Work and Operation of Electrical Equipment and Installations- FSE", that relevant personnel shall be given annual training in FSE. The course also provides training and instruction in first aid, except for cardiopulmonary resuscitation (CPR).

Throughout the course the focus is on attitudes and the individual's responsibility to follow the regulations. FSE training is about knowledge of regulations and instructions, but it is equally important for the individual to understand why we have these regulations. To succeed in getting the individual to understand the importance of working safely, it is crucial that electrical safety is developing in the right direction and that the number of accidents is reduced.

In order to meet the requirement for being able to provide first aid in the event of electrical accidents, you also need to complete yearly practical training in CPR (mouth-to-mouth and heart compressions).

This course does not have the fast track function with pretest. The fast track version is to be found in the course catalogue with the code MTP-052-FT.

Course code: MTP-041
Course type: E-learning course
Duration: 2 hours 30 minutes
Language: English, Norwegian
Price: NOK 1150,-

FSE Offshore Low and High Voltage is a FSE course targeting personell working offshore with low and high voltage installations. The course focuses on FSE offshore and meets the requirements set in § 7 of the "Safety Regulations for Work and Operation of Electrical Equipment and Installations- FSE", that relevant personnel shall be given annual training in FSE. The course also provides training and instruction in first aid, except for cardiopulmonary resuscitation (CPR).

Throughout the course the focus is on attitudes and the individual's responsibility to follow the regulations. FSE training is about knowledge of regulations and instructions, but it is equally important for the individual to understand why we have these regulations. To succeed in getting the individual to understand the importance of working safely, it is crucial that electrical safety is developing in the right direction and that the number of accidents is reduced.

In order to meet the requirement for being able to provide first aid in the event of electrical accidents, you also need to complete yearly practical training in CPR (mouth-to-mouth and heart compressions).

 

This course does not have the fast track function with pretest. The fast track version is to be found in the course catalogue with the code MTP-041-FT.

Course code: MTP-044-FT
Course type: E-learning course
Duration: 2 hours 30 minutes
Language: Norwegian / English
Price: NOK 1150,-

The fast track version starts with a pre-test which checks the  participant's knowledge of FSE. Depending on the answers you give, you will get a course that is tailored to the level of knowledge that is revealed in the pre-test.

The course meets the requirements set in § 7 of the "Safety Regulations for Work and Operation of Electrical Equipment and Installations- FSE", that relevant personnel shall be given annual training in FSE. The course also provides training and instruction in first aid, except for cardiopulmonary resuscitation (CPR).

Throughout the course the focus is on attitudes and the individual's responsibility to follow the regulations. FSE training is about knowledge of regulations and instructions, but it is equally important for the individual to understand why we have these regulations. To succeed in getting the individual to understand the importance of working safely, it is crucial that electrical safety is developing in the right direction and that the number of accidents is reduced.

In order to meet the requirement for being able to provide first aid in the event of electrical accidents, you also need to complete yearly practical training in CPR (mouth-to-mouth and heart compressions).

The course with fast track is suitable for for all, but is particularly practical for those who are going to do refresher training in FSE. The version without fast track is to be found in the course catalogue with the code MTP-044.

 

Course code: MTP-050
Course type: E-learning course
Duration: 2 hours 30 minutes
Language: Norwegian / English
Price: NOK 1150,-

The course meets the requirements set in § 7 of the "Safety Regulations for Work and Operation of Electrical Equipment and Installations- FSE", that relevant personnel shall be given annual training in FSE. The course also provides training and instruction in first aid, except for cardiopulmonary resuscitation (CPR).

Throughout the course the focus is on attitudes and the individual's responsibility to follow the regulations. FSE training is about knowledge of regulations and instructions, but it is equally important for the individual to understand why we have these regulations. To succeed in getting the individual to understand the importance of working safely, it is crucial that electrical safety is developing in the right direction and that the number of accidents is reduced.

In order to meet the requirement for being able to provide first aid in the event of electrical accidents, you also need to complete yearly practical training in CPR (mouth-to-mouth and heart compressions).

This course does not have the fast track function with pretest. The fast track version is to be found in the course catalogue with the code MTP-050-FT.

Course code: TOS-005
Course type: Classroom course
Duration: 2 hours 30 minutes
Language: Norwegian
Price: From NOK 1100,-

FSE first aid is a practical course, with a high number of skill training stations. FSE first aid module will Increase knowledge of life-saving first aid.

The course covers the followong subjects: The first assessment, burns and electrical burns, recovery position, the unconsciousness patient, CPR skill training.

Course code: APP-001
Course type: E-learning course
Duration: 7 hours
Language: English
Price: NOK 4200,-

This course looks at electrical installations in explosive atmospheres. The object of the course is to enable those working in explosive atmospheres to perform their work properly and safely.

 

This course fulfils the requirements for personnel working in explosive atmospheres. Theory is taken from CENELEC and IEC norms.

 

Text, images, videos, animations and 3D simulations will help give you a better understanding of explosive atmospheres and their particular characteristics.

Course code: MTP-055
Course type: E-learning course
Duration: 45 minutes
Language: Norwegian and english
Price: NOK 500,-

The course covers the government requirements on theoretical training for personnel who may undertake simple operational and maintenance tasks on the electrical system.

The course focuses on preventing accidents and to be aware of the dangers of working with electricity. 

The theoretical part of First Aid and instructions are covered, but it is necessary to undertake practical training both in First Aid and the work tasks covered by the instructions in relation to the electrical installation where you are to work.

Course code: MTP-051
Course type: E-learning course
Duration: 2 hours
Language: Norwegian / English
Price: NOK 650,-

The course meets the requirements set in § 7 of the "Safety Regulations for Work and Operation of Electrical Equipment and Installations- FSE", that relevant personnel shall be given annual training in FSE. The course also provides training and instruction in first aid, except for cardiopulmonary resuscitation (CPR).

Throughout the course the focus is on attitudes and the individual's responsibility to follow the regulations. FSE training is about knowledge of regulations and instructions, but it is equally important for the individual to understand why we have these regulations. To succeed in getting the individual to understand the importance of working safely, it is crucial that electrical safety is developing in the right direction and that the number of accidents is reduced.

In order to meet the requirement for being able to provide first aid in the event of electrical accidents, you also need to complete yearly practical training in CPR (mouth-to-mouth and heart compressions).

This course does not have the fast track function with pretest. The fast track version is to be found in the course catalogue with the code MTP-051-FT.

Course code: MTP-042
Course type: E-learning course
Duration: 2 hours
Language: Norwegian / English
Price: NOK 650,-

FSE Offshore - High Voltage is a FSE course targeting personell working offshore with high voltage installations. The course meets the requirements set in § 7 of the "Safety Regulations for Work and Operation of Electrical Equipment and Installations- FSE", that relevant personnel shall be given annual training in FSE. The course also provides training and instruction in first aid, except for cardiopulmonary resuscitation (CPR).


Throughout the course the focus is on attitudes and the individual's responsibility to follow the regulations. FSE training is about knowledge of regulations and instructions, but it is equally important for the individual to understand why we have these regulations. To succeed in getting the individual to understand the importance of working safely, it is crucial that electrical safety is developing in the right direction and that the number of accidents is reduced.


In order to meet the requirement for being able to provide first aid in the event of electrical accidents, you also need to complete yearly practical training in CPR (mouth-to-mouth and heart compressions).


This course does not have the fast track function with pretest. The fast track version is to be found in the course catalogue with the code MTP-042-FT.

Course code: MTP-042-FT
Course type: E-learning course
Duration: 2 hours
Language: English, Norwegian
Price: NOK 650,-

The fast track version of FSE Offshore - High Voltage starts with a pre-test which checks the participant's knowledge of FSE. Depending on the answers you give, you will get a FSE course that is tailored to the level of knowledge that is revealed in the pretest.


The course meets the requirements set in § 7 of the "Safety Regulations for Work and Operation of Electrical Equipment and Installations- FSE", that relevant personnel shall be given annual training in FSE. The course also provides training and instruction in first aid, except for cardiopulmonary resuscitation (CPR).


Throughout the course the focus is on attitudes and the individual's responsibility to follow the regulations. FSE training is about knowledge of regulations and instructions, but it is equally important for the individual to understand why we have these regulations. To succeed in getting the individual to understand the importance of working safely, it is crucial that electrical safety is developing in the right direction and that the number of accidents is reduced.


In order to meet the requirement for being able to provide first aid in the event of electrical accidents, you also need to complete yearly practical training in CPR (mouth-to-mouth and heart compressions).


The course with fast track is suitable for for all, but is particularly practical for those who are going to do refresher training in FSE. The version without fast track is to be found in the course catalogue with the code MTP-042.

Course code: MTP-046-FT
Course type: E-learning course
Duration: 2 hours
Language: Norwegian / English
Price: NOK 650,-

The fast track version starts with a pre-test which checks the  participant's knowledge of FSE. Depending on the answers you give, you will get a course that is tailored to the level of knowledge that is revealed in the pretest.

The course meets the requirements set in § 7 of the "Safety Regulations for Work and Operation of Electrical Equipment and Installations- FSE", that relevant personnel shall be given annual training in FSE. The course also provides training and instruction in first aid, except for cardiopulmonary resuscitation (CPR).

Throughout the course the focus is on attitudes and the individual's responsibility to follow the regulations. FSE training is about knowledge of regulations and instructions, but it is equally important for the individual to understand why we have these regulations. To succeed in getting the individual to understand the importance of working safely, it is crucial that electrical safety is developing in the right direction and that the number of accidents is reduced.

In order to meet the requirement for being able to provide first aid in the event of electrical accidents, you also need to complete yearly practical training in CPR (mouth-to-mouth and heart compressions).

The course with fast track is suitable for for all, but is particularly practical for those who are going to do refresher training in FSE. The version without fast track is to be found in the course catalogue with the code MTP-046.

 

Course code: MUK-020
Course type: E-learning course
Duration: 1 hour 30 minutes
Language: English
Price: NOK 1000,-

This course aims to provide all relevant personnel with a broad overview of common Electrical Safety Rules, and outlines best practice when working with electricity.


Course content
- Explain the importance of Electrical Safety Rules
- Identify the laws which exist to prevent injuries from electricity in the workplace
- Define electrical safety terminology
- Define the role of the Responsible Electrical Person
- Define the role of the Authorised Electrical Person
- Define the role of the Competent Electrical Person
- Describe the general precautions to be taken and the safety procedures to be followed
- Identify the correct PPE to be used for specific electrical tasks
- Explain the safe systems of work that are used to control electrical work
- Define what is meant by electrical isolation
- Explain the key steps involved in electrical isolation
- Describe the procedures for earthing
- Describe the precautions to be taking when working on low voltage systems, live low voltage equipment, high voltage systems and extra low voltage systems
- Describe the procedures for the testing of high voltage and low voltage systems
- Describe the precautions to be taken during switching operations
- Explain when personal isolations are appropriate
- Give an overview of common isolation security procedures
- Describe the actions to take in an electrical emergency

Course code: MTP-052-FT
Course type: E-learning course
Duration: 2 hours
Language: Norwegian / English
Price: NOK 650,-

The fast track version starts with a pre-test which checks the  participant's knowledge of FSE. Depending on the answers you give, you will get a course that is tailored to the level of knowledge that is revealed in the pretest.


The course meets the requirements set in § 7 of the "Safety Regulations for Work and Operation of Electrical Equipment and Installations- FSE", that relevant personnel shall be given annual training in FSE. The course also provides training and instruction in first aid, except for cardiopulmonary resuscitation (CPR).

Throughout the course the focus is on attitudes and the individual's responsibility to follow the regulations. FSE training is about knowledge of regulations and instructions, but it is equally important for the individual to understand why we have these regulations. To succeed in getting the individual to understand the importance of working safely, it is crucial that electrical safety is developing in the right direction and that the number of accidents is reduced.

In order to meet the requirement for being able to provide first aid in the event of electrical accidents, you also need to complete yearly practical training in CPR (mouth-to-mouth and heart compressions).

The course with fast track is suitable for for all, but is particularly practical for those who are going to do refresher training in FSE. The version without fast track is to be found in the course catalogue with the code MTP-052.

Hits per page