Course catalogue

Who is the course for?

All personnel involved in the transportation or supporting of a load by hand or bodily force.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

The aim of this course is to increase learners’ awareness of the importance of safe manual handling operations and the risks involved with manual handling. The course also aims to outline best practices for the correct handling techniques for safe lifting; and for the pushing and pulling of loads.

How will the course benefit my company?

This course will benefit your company by reducing manual handling accidents.

What standards are referenced in the course?

• The Manual Handling Operations Regulations

• The Management of Health and Safety at Work Regulations

• Health and Safety at Work Act

• Health and Safety Executive (HSE)

Is there an assessment?

Yes

Learning objectives

- Recall what is meant by the term ‘manual handling’

- Identify the types of injuries that may result from manual handling operations

- Identify the legislation that is in place to regulate manual handling operations

- Identify the duties that are placed on employers and employees by the Manual Handling Operations Regulations

- Recognise the types of risk assessment which are relevant to manual handling operations

- Identify factors to consider when assessing manual handling operations to reduce the potential risks of injury

- Identify good handling techniques for the safe lifting of loads

- Identify good handling techniques for pushing and pulling loads

Accreditation:

This course is approved by the Institution of Occupational Safety and Health (IOSH).

IOSH is the world’s Chartered body for safety and health professionals. 

What that means:

• We are the largest membership body for health and safety professionals.

• We champion occupational safety and health causes and advocate for change.

• We advise governments, NGOs and policymakers.

• We facilitate safety and health awareness training in around 130 countries through IOSH Services Ltd, our wholly-owned trading arm.

• We commission research and set national and international standards.

• We shape the future of the profession.

Who is the course for?

All categories of crane operators who have completed a basic slinger course.

Is previous experience required?

Completed basic slinger course.

How will the course benefit me?

All usage, storage, and inspections of lifting equipment shall be in accordance with the producer's instructions and requirements stipulated in the NORSOK R-003 standard. Lifting equipment shall be used only by personnel who have and can document competence in lifting operations.

How will the course benefit my company?

By ensuring you have required knowledge as a basic slinger to enable you to reduce accidents and incidents.

What standards are referenced in the course?

NORSOK R-003, 2017

Is there an assessment?

Yes

Who is this course for:

All categories of crane operators who have completed a basic rigging course.

Is previous experience required?

Learners must have completed a basic rigging course.

How will this course benefit me?

By ensuring you have the required safety knowledge and theoretical competence as a rigger. 

How will this course benefit my company?

This course provides a basic review and update of knowledge of rigging operations in accordance with applicable standards and regulations. All rigging operations shall be performed according to applicable safety regulations. These specifications are stipulated in the NORSOK R-003 standard and in the Regulations for using work equipment. Only personnel who have documented rigger training may perform rigging operations. This course provides a basic review and update of knowledge of rigging operations in accordance with applicable standards and regulations. 

What standards are referred to in this course?

NORSOK R-003, 2017

Is there an assessment?

Trainingportal assessment with an 80% pass mark and two attempts.

Who is this course for:
This course is for users of scaffolding as a work platform in accordance with § 17-5 in ‘Regulations concerning the Performance of Work’.

Is previous experience required?
No previous experience is required to complete this course.

How will this course benefit me?
By providing you with a good understanding of the principles to do with the construction, functioning, maintenance and use of scaffolding, so that incidents and accidents can be avoided.

How will this course benefit my company?

By making scaffolding users aware of responsibility, legislation, safe use of scaffolding, assembly, and the scaffolding types.

What standards are referred to in this course?
§ 17-5 in ‘Regulations concerning the performance of work’

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

This course is aimed at personnel working in the energy and maritime sectors.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

Dropped objects can cause serious injuries as well as damage to assets and equipment. This course will give you a basic understanding of the common causes of dropped objects, their potential consequences and how they can be prevented.

How will this course benefit my company?

By ensuring that personnel are aware of the risk dropped objects present, their common causes and how they can be prevented.

Is there an assessment?

Yes

Accreditation:

CPD, IOSH 

- This course is approved by the Institution of Occupational Safety and Health (IOSH).

- IOSH is the world’s Chartered body for safety and health professionals. 

What that means:

• We are the largest membership body for health and safety professionals.

• We champion occupational safety and health causes and advocate for change.

• We advise governments, NGOs and policymakers.

• We facilitate safety and health awareness training in around 130 countries through IOSH Services Ltd, our wholly-owned trading arm.

• We commission research and set national and international standards.

• We shape the future of the profession.

Who is the course for?

This course is aimed at all personnel involved in lifting operations in the Oil and Gas Industry.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

This course provides learners with an awareness of the Lifting Operations and Lifting Equipment Regulations (LOLER) and gives an overview of industry best practice in relation to working with lifting equipment.

How will the course benefit my company?

This course will provide personnel with an overview of rigging and lifting operations.

What standards are referenced in the course?

• Lifting Operations and Lifting Equipment Regulations (LOLER) 

• Health and Safety at Work Act 

• Management of Health and Safety at Work Regulations 

• Provision and Use of Work Equipment Regulations (PUWER)

Is there an assessment?

Yes

Accreditation

This course is approved by the Institution of Occupational Safety and Health (IOSH).

IOSH is the world’s Chartered body for safety and health professionals.

What that means:

We are the largest membership body for health and safety professionals.

We champion occupational safety and health causes and advocate for change.

We advise governments, NGOs and policymakers.

We facilitate safety and health awareness training in around 130 countries through IOSH Services Ltd, our wholly-owned trading arm.

We commission research and set national and international standards.

We shape the future of the profession.

Who is the course for?

All personnel who may be exposed to naturally occurring radioactive material (NORM) in the workplace.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

This course aims to provide an awareness of NORM and provide best practices for managing NORM in oil and gas producing facilities.

How will the course benefit my company?

The course will benefit companies by ensuring that all members of personnel have an awareness of NORM and how it should be managed, which will help to reduce workplace accidents.

What standards are referenced in the course?

There are no standards or regulations referenced in this course.

Is there an assessment? 

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80% with 2 attempts.

Accreditation:

CPD, IOSH. 

This course is approved by the Institution of Occupational Safety and Health (IOSH).

IOSH is the world’s Chartered body for safety and health professionals. 

What that means:

• We are the largest membership body for health and safety professionals.

• We champion occupational safety and health causes and advocate for change.

• We advise governments, NGOs and policymakers.

• We facilitate safety and health awareness training in around 130 countries through IOSH Services Ltd, our wholly-owned trading arm.

• We commission research and set national and international standards.

• We shape the future of the profession.

Who is this course for?

Personnel requiring knowledge or awareness of HAZID.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to provide all personnel with solid hazard identification awareness to enable them to evaluate hazards quickly and effectively so that they can carry out their duties as safely as possible.

How will this course benefit my company?

By ensuring you are able to evaluate hazards quickly and effectively so that you can carry out your duties as safely as possible.

What standards are referred to in this course?

• Offshore Installations (Offshore Safety Directive) Regulations

• Control of Major Accident Hazards Regulations

• Directive 2013/30/EU on Safety of Offshore Oil and Gas Operations

• Title 30 of the Code of Federal Regulations (30 CFR) on Mineral Resources

Is there an assessment?

Once you have completed the course, there is an assessment with a pass mark of 80% and 2 attempts.

Who is this course for?

This HSE Chemicals training course is for personnel who require an introduction to or awareness of working with chemicals in the oil and gas industry.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

The course is for all those who work with or can come in contact with chemicals. The course is also intended for those who work on a general basis with workplace environment issues, purchasing, or transportation. The course will give the target group fundamental knowledge of safe use of chemicals.

How will this course benefit my company?

By ensuring you have fundamental knowledge of the safe use of chemicals.

What standards are referred to in this course?

• REACH

• The Working Environment Act 

• The Product Control Act 

• The Pollution Control Act

• The Chemical Labelling Regulations

• Regulations relating to Organisation, Management and Participation

• The Internal Control Regulations

• Performance of Work Regulations

• The Product Control Regulations

Is there an assessment?

Yes

Who is this course for?

This FSE High and Low Voltage Training course is suitable for everyone working on low and high voltage installations.

Is previous experience required?

You do not need prior knowledge or experience to complete this course, but it is assumed that you are competent in your designated role.

How will this course benefit me?

The course meets the requirements set in Section 7 of the ‘Safety Regulations for Work and Operation of Electrical Equipment and Installations – FSE’ which is that all relevant personnel undertake annual training and instruction in FSE. The course also provides the necessary training and instruction in first aid, focusing on electrical injuries, with the exception of the mandatory practical training in cardiopulmonary resuscitation (CPR).

The regulations of various authorities make FSE applicable to all those working with electricity, whether on board ship, on platforms or on land. This course is suitable for all, regardless of which industry you work in.

The authorities require that training in FSE and first aid in the event of electrical accidents is undertaken at least once a year. No more than 12 months shall elapse between training courses.

How will this course benefit my company?

By ensuring you have the knowledge and competence to be working on low and high voltage installations.

What standards are referred to in this course?

• Section 7 of the ‘Safety Regulations for Work and Operation of Electrical Equipment and Installations – FSE’

• The European standard

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.