Course catalogue

Presentation 

This training course aims at providing a general description of the different types of lifting appliances that may be found on board ships and offshore units, their main characteristics and operating principles. It provides an introduction to the applicable rules and regulations related to lifting appliances. 

Objectives

On completion of the training, students will be able to: 

Get familiar with the various types of lifting appliances installed on board ships and offshore units. 

Know the regulations, which are relevant for inspection and certification of cargo gear, including international regulations and BV Rules. 

Understand the particularities of lifting appliances and the relevant requirements for the survey of materials and equipment.

Understand the scope of intervention for Cargo Gear in various stages – design, manufacturing and operation, including an overview of control and safety design requirements.

Program

Types of lifting appliances

Definitions

Derrick systems

Cranes

Typical crane types

Applicable Rules and Regulations

International Regulations and National Requirements

Bureau Veritas Rules, additional class notations and recognized standards

Bureau Veritas services

Cargo Gear Register Book

Design, Inspection, testing and surveys at works

Design acceptance criteria

Documents to be submitted

Inspection and testing

Steel wire ropes and fibre ropes

Loose gear

Winches

Survey of fitting on board

Overall tests prior to putting into service: Mandatory tests, overload test, testing at

Manufacturer’s test bench, inspections after testing

Marking

In-service surveys

Periodicity, scope and documentation

Guidelines for a thorough annual examination

Items to be tested: slew bearing, loose gear examination, ropes, hydraulic system

Control and safety devices

Thickness measurements, wear limits and criteria for replacement

Certificate

On completion of the training program, the student will be awarded: 

A Certificate of Cargo Gear and Lifting Appliances, issued by Bureau Veritas Solutions Marine & Offshore.

The Certificate of Cargo Gear and Lifting Appliances is obtained after completion of the course and passing the online test. 

This course will give you an introduction to the use of EPOXY and about procedures that ensure a safe work environment. The aim of the course is for you to be able to contribute to that your work place will continue to be a safe place to work, without injuries and accidents.

The course contains the following subjects:
-    Introduction to Epoxy products
-    Relevant health risks associated with Epoxy produkts
-    Precautions by using Epoxy products
-    Danger symptoms
-    Final test

The course covers the following topics:

- How to handle substance abuse
- Drug policies
- AKAN

At the beginning of the course you can take a pre-test, where you get the opportunity to show your skills. If you pass the pre-test, you do not have to go through the entire course.

Course Goal: This course aims to provide an introduction to the decommissioning process and an overview of the regulations governing decommissioning on the United Kingdom Continental Shelf (UKCS).

Who is the course for?

All relevant personnel

Is there an assessment? 

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Learning Objectives:

LO1 Give an overview of the history of oil and gas production on the United Kingdom Continental Shelf (UKCS)

LO2 Explain why decommissioning activity is increasing on the UKCS

LO3 Describe what is meant by ‘decommissioning’

LO4 Explain the scope of decommissioning on the UKCS

LO5 Provide an overview of relevant decommissioning legislation and regulations

LO6 Explain the impact of the Brent Spar incident on decommissioning regulation

LO7 Provide an overview of the OSPAR Decision 98/3

LO8 Identify the different phases of the decommissioning lifecycle

LO9 Provide a basic overview of well plugging and abandonment 

LO10 Provide an overview of the different methods of decommissioning

LO11 Provide examples of decommissioning projects on the UKCS

LO12 Give examples of the types of hazards which may be encountered during decommissioning

Who is this course for?

All personnel working with electricity in the Oil and Gas Industry

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to provide all relevant personnel with an overview of the safety precautions to be taken when working on electrical equipment

How will this course benefit my company?

By ensuring you have an overview of the safety precautions to be taken when working on electrical equipment

What standards are referred to in this course?

Health and Safety at Work Act (1974)

Electricity at Work Regulations (1989)

Management of Health and Safety at Work Regulations (1999)

Electricity at Work Safe Working Practices (2003)

Offshore Electricity and Noise Regulations (1997) 

Provision and Use of Work Equipment Regulations (1998)

BS 7671: 2008 Requirements for Electrical Installations

Offshore Installations (Safety Case) Regulations 2005 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%

The object of this course is to motivate participants to actively contribute to a better and safer working environment. The course emphasises preventative measures that can prevent harm to people, the environment and equipment.

Course Content

After completing the course the students should have acquired basic knowledge of and proficiency in:

- HSE culture

- Prevention of work accidents

- Use of relevant fire fighting and rescue equipment

- Lifesaving first aid

- Collective evacuation aids

- Correct use of rescue suits with breathing apparatus

- Helicopter evacuation (HUET)

The course aims to create positive attitudes to the term HSE culture and an understanding of the importance of the social and physical working environment to life, health and values, both at work and during leisure time.

The course is valid for 48 months.

Hensikten med kurset er å repeter grunnleggende kunnskaper og ferdighet, til utførende ansvarlig person som skal demontere, montere og for spenne bolter i henhold til NS EN 1591-4 kapittel 8

Praktisk informasjon:
Re sertifiseringen er basert på 1 dag og består av klasseromsundervisning og praktiske oppgaver
Kurset avsluttes med en teoretisk og praktisk eksamen med sensor.
Etter man har bestått teoretisk og praktisk eksamen er man sertifisert for nye 5 år men følgende punkter må i varetas for at det skal vare ut 5 års perioden:
- Sertifisert personell skal ikke ha hatt avbrudd i arbeid med bolte arbeid for en periode på over seks måneder.
- Ved utførelse av arbeid på boltede forbindelser, skal det ikke foreligge noen grunn til å stille spørsmål om den faglige kompetansen til sertifisert personell.

Hvis disse vilkårene ikke oppfylles, skal sertifiseringen trekkes tilbake.
 
Kursinnhold:
Kurset tar for seg følgende tabeller i EN1591-4:2013:
1, 2, 3, 6, 7, 8 og 9.

Course Goal: 

This course provides learners with an awareness of US best practice in relation to working at height and fall protection.

Learning Objectives:

LO1 Identify when fall protection is required

LO2 Identify the legislative and regulatory requirements for fall protection that help to control work at height

LO3 Explain the duties that are placed on employers and employees

LO4 Describe the hazards involved in working at height

LO5 Explain the importance of planning and risk assessment

LO6 Describe the hierarchy of control for managing and selecting fall protection equipment 

LO7 Identify the factors that should be considered when assessing fall protection methods

LO8 Describe the main methods of access for working at height and give examples of the different types of fall protection equipment

LO9 Describe the rules for working with ladders

LO10 Describe the rules for working with scaffolds

LO11 Explain the importance of inspecting equipment

LO12 Explain how to correctly use a safety harness

Who is this course for?

All relevant personnel

Is previous experience required?

You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

How will this course benefit me?

This course aims to provide an overview of Oil and Gas metering, Sampling and Pigging

This course contains seven modules:

Module 1: Introduction to Metering

Module 2: Gas Metering Principles of Flow Measurement

Module 3: Gas Metering

Module 4: Oil Metering

Module 5: Metering Operations

Module 6: Sampling Systems

Module 7: Pigging

How will this course benefit my company?

To ensure you have an overview of Oil and Gas metering, Sampling and Pigging

What standards are referred to in this course?

The course is made according to industry best practice. 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

All personnel involved in forklift activities.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to provide an overview of the hazards specific to forklift activities. 

How will this course benefit my company?

By ensuring you have an overview of the hazards specific to forklift activities. 

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course Goal:

This course aims to  provide learners with an overview of US best practice in relation to working with hand and power tools.

This course aims to provide an understanding of the potential hazards associated with the use of hand tools and power tools, as well as the safety precautions required to prevent those hazards from occurring.

Learning Objectives:

LO1 Identify the general hazards and control measures associated with hand and power tools

LO2 Identify specific hazards associated with hand tools

LO3 Give an overview of general power tool safety precautions

LO4 Explain how guards provide protection to operators

LO5 Give examples of tools that must be equipped with a momentary switch

LO6 Identify specific hazards and control measures related to the use of electric tools

LO7 Identify the proper procedures to follow when using a grinder

LO8 Identify specific hazards and control measures related to the use of pneumatic tools

LO9 Identify specific hazards and control measures related to the use of powder-actuated tools

LO10 Identify specific hazards and control measures related to the use of hydraulic jacks

Who is this course for?
All personnel.

Is previous experience required?
You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

How will this course benefit me?
This course aims to provide personnel with a guide on the preventative and protective measures that may be put in place at workplaces following personnel return

How will this course benefit my company?
By ensuring you have an overview of the preventative and protective measures that may be put in place at workplaces following personnel return

What standards are referred to in this course?
N/A

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Este curso está diseñado para brindarle al personal costa afuera un conocimiento general sobre los peligros y medidas de control que se relacionan con las áreas de trabajo de la instalación en las que puede estar presente el H2S.

• Comprender mejor los peligros que se relacionan con el H2S y las medidas necesarias de detección y protección que deben tenerse y cumplirse

• Identificar los niveles y límites de exposición laboral legales que se han establecido para su protección.

• Explicar las responsabilidades de los empleadores en lo que respecta a la gestión de riesgos asociados a la posible exposición al H2S en el lugar de trabajo.

• Explicar las tareas de los empleados respecto de cumplir con los procedimientos pertinentes sobre H2S y seguir las pautas que proporcionan los empleadores o propietarios de las instalaciones.

The course is only available in Norwegian

Kurset gir kjennskap til forskrifter, regelverk og retningslinjer for arbeids- og entringstillatelser i områder med brann- og helsefarlige produkt. I tillegg gis kjennskap til virkemåter og begrensninger for sensorer som måler brennbare gasser, oksygen og helsefarlige gasser, samt kunnskap om metoder for gassfriing og rengjøring av anlegg.

Rettet mot alle som arbeider i prosesser/områder hvor det kan oppstå eksplosjonsfarlige atmosfærer. 

Etter kurset skal deltakerne:

- kjenne forskrifter, regelverk og retningslinjer for arbeids- og entringstillatelser i områder med brann- og helsefarlige produkt

- virkemåter og begrensninger for sensorer som måler brennbare gasser, oksygen og helsefarlige gasser

- kunne metoder for gassfriing og rengjøring av anlegg

FSE first aid is a practical course, with a high number of skill training stations. FSE first aid module will Increase knowledge of life-saving first aid.

The course covers the followong subjects: The first assessment, burns and electrical burns, recovery position, the unconsciousness patient, CPR skill training.

The goal of this course is that all personnel who use hazardous work equipment, will gain good knowledge of HSE when using work equipment. The course deals with personnel requirements, roles and responsibilities, as well as accidents and regulations on safety.

In addition, the course requires that practical training is conducted on applicable work equipment.

The course covers the following topics:

• Work equipment in general

• Use of work equipment

• Selection of work equipment

• Training in the use of work equipment

• Workspaces and personnel requirements

• Risk assessment

• Safety, accidents and liability

• Direct and underlying causes of accidents

• Relevant laws and regulations

The course includes exercises, and final test with 30 questions.

Who is this course for?

Personnel requiring an awareness or understanding of common handling and storage methods for chemicals.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to provide an overview of the requirements for the handling and storage of hazardous substances

How will this course benefit my company?

By ensuring you have an overview of the requirements for the handling and storage of hazardous substances

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%. 

We investigate to learn, to implement preventive measures and prevent recurrence of adverse events. Investigating an incident is like peeling an onion. We start with the direct causes which are the most visible. To get to the bottom of the events we must uncover "layer upon layer" which others causes lay behind. The technological development, and new forms of organizations, increase the complexity and it becomes more difficult to understand the connection between the incident and the underlying causes. This course presents method, organization and process for the implementation of investigations. The course can also be offered in combination with a classroom session.

COURSE CONTENT

- Description and classification of events

- Organization of an investigation

- Collection and securing of information

- The cause of loss model

- MTO model

- STEP model

- Reporting and follow-up

HOW WILL THIS COURSE BENEFIT ME AND MY COMPANY?

After completing the course, participants should understand what investigation is and know the various steps in an investigation process. Participants will also receive knowledge of how investigations are conducted and implemented in practice.

Course provider: Proactima

Who is this course for?

Personnel who work with pumps in the Oil & Gas industry.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

This course aims to provide an overview of the various types of pumps used in the Oil and Gas Industry.

How will this course benefit my company?

The course will benefit companies by ensuring that all personnel who work with pumps have an overview of each type and how they work.

What standards are referred to in this course?

No standards or regulations are referenced in this course.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

Personnel requiring an awareness or understanding of US respiritory protection and RPE.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to ensure that relevant personnel in the US have a common and consistent understanding of RPE.

How will this course benefit my company?

By ensuring you have a common and consistent approach to company and industry best practice in relation to US RPE.

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.