Oil and Gas

Course catalogue

hits
656
Course code: BVS-017
Course type: E-learning course
Duration: 1 hour
Language: English
Price: EUR 200,-

Presentation

This training course aims at providing a general description of the requirements for the prevention of pollution by sewage from ships as defined by the Annex IV of the MARPOL Convention.

Objectives

On completion of the training, students will be able to:

Understand the MARPOL requirements for prevention of sewage pollution from ships.

Know the various sewage treatment systems which are accepted by the MARPOL Convention.

Know the equipment required on board different ship types.

Understand the criteria defined in the convention for the control of discharge of sewage.

Understand the requirements for survey and certification of ships.

Program

Introduction

Applicability

Definitions

Equipment

Types of sewage systems

Sewage treatment plant

Holding tank

Sewage comminuting and disinfecting system

Standard discharge connection

The special case of livestock carriers

Discharge criteria

Discharge of sewage from ships other than passenger ships

Discharge of sewage from passenger ships outside special areas

Discharge of sewage from passenger ships within a special area

Survey and certification

International Sewage Pollution Prevention Certificate

Certificate entries: Number of persons the ship is certified to carry; New or existing ship; 

New or existing passenger ship for the application of Regulation 11.3

Survey requirements

Type Approval Certificate for sewage treatment plants

Certificate

On completion of the training program, the student will be awarded: 

A Certificate of MARPOL Sewage Pollution, issued by Bureau Veritas Solutions Marine & Offshore.

The Certificate of MARPOL Sewage Pollution is obtained after completion of the course and passing the online test.

Course code: OCS-001
Course type: E-learning course
Duration: 15 minutes
Language: English
Price: NOK 200,-

Review of all pages in the module ESS Basic, hereunder personal data, competence, activity overview and activity requests.

Course code: IMIST-003
Course type: E-learning course
Duration: 300 minutes
Language: Latin American Spanish
Price: USD 99,-

Who is the course for?

This eLearning course is aimed at individuals who work offshore, in any role, anywhere in the world.

 

Is previous experience required?

The course is designed for existing workers in the oil and gas industry. Completion of this course awards an IMIST certificate valid for four years, after which you will need to sit the course again to refresh your knowledge and earn a new certificate.

 

How will the course benefit me?

The offshore working environment is home to many hazards, which means that it is vital for everyone who goes offshore to have the same baseline level of safety knowledge. This course has been created with OPITO to set a global safety standard by applying a consistent level of safety awareness across nine safety critical areas and is applicable .

 

The knowledge gained in this course will help you to stay safe in your day-to-day activities offshore. It will also outline some of the systems and procedures in place to manage everyday operations offshore.

 

How will the course benefit my company?

By ensuring that your safety knowledge is at or above the baseline level, your company can rest assured that you are able to work offshore safety and in compliance with regulations and company procedures. Increased safety knowledge helps to prevent incidents and makes your working environment a safer place.

 

What standards are referenced in the course?

This course is written based on the OPITO standard International Minimum Industry Safety Training Standard (IMIST) (5312). As a global standard, the course is not written to meet any specific regional legislation but references industry best practices and standard operating procedures throughout.

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 100%. 

The course starts with an optional pre-assessment that checks your existing knowledge of the course topics. The course will restructure so that it only contains the content needed to address the gaps in your knowledge.

 

Please find pre-course information and learning outcomes here: 

https://mintra.com/implementing-maintaining-opito-standards-policy


Course code: EBA-004
Course type: E-learning course
Duration: 1 hour 40 minutes
Language: Norwegian, English, Po ...
Price: NOK 650,-

The course provides knowledge about the structure, operation, applications and usage, maintenance and monitoring of the appropriate tool. The training provides knowledge about the requirements for safe use and operation stipulated in regulations and instructions.

Along with a practical review of the tools, the course meets the requirements for documented training in hazardous work equipment in Regulations concerning the Performance of Work.

The course covers the following subjects:

- Introduction to general HSE
- Angle grinder
- Hammer drills, jackhammers and combihammers
- Powder actuated gun
- Nail gun
- Saws with blade (includes table saw, crosscut and miter Saw, circular saw, jigsaw and reciprocating saw)
- Chain saw

 

Course code: APP-010
Course type: E-learning course
Duration: 3 hours
Language: Polish
Price: NOK 650,-

Section 7 of the “Safety Regulations for Work and Operation of Electrical Equipment and Installations” (FSE) sets requirements for yearly FSE training for relevant personnel. This e-learning course takes you through the requirements of the regulations and gives you training and instruction in FSE. The course focuses on safety for work on low voltage installations offshore.

 

The course also provides first-aid instruction and training. CPR training must be completed separately.

 

In accordance with section 7 of FSE, FSE and and first-aid training must be completed at least once a year. In order to meet the requirement for being able to provide first aid in the event of electrical accidents, you also need to complete yearly practical training in CPR (mouth-to-mouth and heart compressions).

 

This course addresses a variety of issues and covers how to prevent electrical accidents, routines in the event of accidents, and theoretical first aid, and aims to help prevent harm to people, equipment, and installations.

Course code: MTP-056
Course type: E-learning course
Duration: 20 minutes
Language: Norwegian / English
Price: NOK 600,-

Who is this course for?

All employees at all levels of the organisation who require an awareness of steps to take in the event of armed attack.

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

 

How will this course benefit me?

The main idea behind the course is that knowledge about and reflection on what to do makes us feel more confident and able to make informed choices.  In a public area or at work, are you aware of what the premises look like, and how you can evacuate if a situation should occur? In order of priority you should act in this way; Run, Hide, Fight!

 

The course describes these guidelines in more details and also allows the user to reflect upon various aspects of an armed attack.

 

How will this course benefit my company?

By ensuring you are aware of the priorities should an armed attack occur.

 

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

 

Is there an assessment?

There is no exam upon completion of this course.

Course code: PRO-031
Course type: E-learning course
Duration: 4-6 hours
Language: Norwegian
Price: NOK 2900,-

For English version of this course, please enrol to "OG1 Basic emergency management, English (e-learning)" Course.

 

Proactive emergency response management involves identifying measures that can control the development in the desired direction and take action before circumstances force one to do it.
This course is the first step of the way to handle such situations and thus participate in 2nd or 3rd line emergency response organization onshore.

 

Course content:
• Introduction
• Defined hazard and accident situations
• External resourses
• The structure and use of emergency plan
• Training and exercises
• Evaluation and improvement
• Stress reaction in an emergency organisation
 

Target group:
Target group is all personnel who will participate in 2nd and 3rd line emergency response work in the company.

 

Learning methods:
E-learning. It is recommended that e-learning course is followed up with collection, training and exercises. Please contact course provider Proactima for a customized business services.

Course code: MUK-205
Course type: E-learning course
Duration: 30 minutes
Language: English (US)
Price: NOK 500,-

Course goal:

This course aims to provide learners with an awareness of US best practice in relation to manual handling activities.

To increase learners’ awareness of the importance of safe manual handling operations and the risks involved with manual handling. The course also aims to give an overview of the OSHA requirements for the correct handling techniques for safe lifting, and for the pushing and pulling of loads.

 

Learning Objectives

 LO1 Define the term ‘manual handling’ and explain the importance of safe manual handling operations 

LO2 Identify the types of injuries that may result from improper manual handling operations 

LO3 Identify safe work practices in relation to manual handling operations

LO4 Describe the duties that are placed on employers and individual personnel in relation to manual handling operations

LO5 Explain the importance of risk assessing manual handling operations 

LO6 Identify the factors to consider when assessing manual handling operations and identify ways of reducing the risks of injury 

LO7 Describe good handling techniques for safe lifting

LO8 Describe good handling techniques for pushing and pulling loads

LO9 Explain the training requirements associated with manual handling operations

 

Course code: MUK-065
Course type: E-learning course
Duration: 30 minutes
Language: English
Price: NOK 500,-

Who is this course for?

Trainee Oil and Gas Operations Technicians and Maintenance Personnel

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

 

How will this course benefit me?

This course aims to provide an overview of the Heating, Ventilation and Air Conditioning (HVAC) system

 

How will this course benefit my company?

By ensuring you have an overview of the Heating, Ventilation and Air Conditioning (HVAC) system

 

What standards are referred to in this course?

Minimum Efficiency Reporting Value (MERV)

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: KOL-005
Course type: Classroom course
Duration: 5 days
Language: Norwegian
Price: From NOK 14000,-

Hensikten med opplæringen er å gi blivende riggere en god praktisk grunnopplæring i sikker bruk av riggerutstyr. Opplæringen skal gi elevene god innsikt i prinsippene for riggutstyrets konstruksjon, virkemåte, bruk og vedlikehold, slik at uhell og ulykker i forbindelse med riggoperasjoner unngås. Riggoperasjon: Bruk og sammenstilling av transportabelt løfteutstyr og/ eller manuelle/ kraftdrevne vinsjer, taljer etc. som benyttes ved horisontal og/ eller vertikal forflytning av last. Opplæringen dekker den nødvendige teoretiske og praktiske opplæringen som er nødvendig for å kunne gjennomføre selvstendige riggoperasjoner. Opplæringen avsluttes med en praktisk prøve.

 

Modul O-2.2: Fallsikring - Søylesvingkran / enkel traverskran - Taljer / vinsjer. (16 timer opplæring).

Modul O-3.2: Rigging (32 timer opplæring) Beviset kan utstyres med opplæringsbedriftens/virksomhetens logo.



This course is only available in Norwegian.

Course code: MUK-163
Course type: E-learning course
Duration: 30 Minutes
Language: English
Price: NOK 500,-

Who is this course for?

Oil and Gas Operations Technicians.

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role.

 

How will this course benefit me?

This course aims to provide an overview of coiled tubing equipment and its operation.

 

How will this course benefit my company?

To ensure you have an overview of coiled tubing equipment and its operation.

 

What standards are referred to in this course?

This course is made according to industry best practice.

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: MUK-063
Course type: E-learning course
Duration: 30 minutes
Language: English
Price: NOK 500,-

Who is this course for?

Personnel who require an awareness and understanding of methods of oil and gas recovery.

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

 

How will this course benefit me?

This course aims to provide learners with an introduction to oil and gas recovery methods

 

How will this course benefit my company?

By ensuring you are introduced to the various ways oil and gas are recovered from the well.

 

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: PRO-006
Course type: E-learning course
Duration: 2-3 hours
Language: English
Price: NOK 950,-

Induction course in HSE is designed so that participants will have the first necessary expertise to ensure safety challenges in their daily work. This occurs in part through increased awareness of what is valuable and should be prioritized. The course also draws attention to the main framework governing the HSE The course is designed in order to create interest and motivation to work with HSE in the workplace.

 

Course contents

The course is divided into three topics:

-Care! - To take care of each other

-Terms and conditions - Laws, regulations and rules

-The challenging life - how to work without going wrong

 

Participants will

-Be motivated to work with safety in the workplace.

-Understand the relationship between a good safety work and preventing loss of important values such as life, health and nature in balance.

-Get an introduction to the main control elements of the HSE 

-Get advice on how they can work safely under time pressure and stress situations

 

Course provider: Proactima

Course code: MUK-094
Course type: E-learning course
Duration: 200 minutes
Language: English
Price: NOK 1500,-

Who is this course for?

Personnel who require an awareness and understanding of various water injection methods.

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

 

How will this course benefit me?

This course aims to provide all relevant personnel with the knowledge required to understand water injection. 

 

This course contains nine modules:

Module 1: Introduction to Water Injection

Module 2: Reservoirs and Rock Properties

Module 3: Waterflooding

Module 4: Injection Water Impurities

Module 5: Water Treatment

Module 6: Water Injection Systems

Module 7: Water Quality Monitoring

Module 8: Well Design and Construction

Module 9: Operation of the Water Injection System

 

How will this course benefit my company?

To ensure you have the knowledge required to understand water injection.

 

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: KYS-001
Course type: E-learning course
Duration: 3-5 hours
Language: English
Price: NOK 6900,-

The course provides employees who are responsible for drinking water offshore, or tasks associated with this, increased knowledge and understanding to provide good, sufficient and safe drinking water to the staff on board.

Satisfy the requirements for competence in relation to the Norwegian Public Health Institute’s guidelines: “Nok, godt og sikkert drikkevann offshore.”

After the course you should:
- Know about and be able to orient yourself in the relevant regulations with emphasis on the public health department's supervisor “Nok, godt og sikkert drikkevann offshore"
- Understand the distinction between drinking water affect the installation's water system, and people's health
- Understand the purpose of the various laboratory analyzes used to monitor the quality of water
- Know which analyzes offshore employees are responsible for themselves, and what responsibilities they have in connection with the analyzes that must be sent to an accredited laboratory
- Be able to interpret results from laboratory analyzes and know what action offshore staff must implement when results are abnormal and/or critical
- Understand the structure of a drinking water system offshore, and where in the system offshore personnel has responsibility for operation and maintenance

Please note: this course is also available in an Norwegian-language version.

The course is delivered by the accredited laboratory SINTEF NORLAB AS. 

Course code: MTP-071
Course type: E-learning course
Duration: 30 minutes
Language: English (US)
Price: NOK 500,-

Who is this course for?

Personnel requiring knowledge or awareness of hot work hazards and controls in the US.

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

 

How will this course benefit me?

This course aims to provide learners with an awareness of US best practice in relation to hot work.

 

How will this course benefit my company?

By ensuring you are aware of US best practice in relation to hot work.

 

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: TQ_023
Course type: E-learning course
Duration: 15 minutes
Language: English
Price: GBP 15,-

Coaching is a process that can be customized to meet the needs of the trainee. This process seeks to raise the workforce awareness toward their current style of work and behavior. It helps them strengthen their uniqueness optimally. It provides with different tools and strategies that help them achieve their individual goals faster. Coaching is the process that guides an individual to maximize the productivity seamlessly so as to achieve more in less. This helps them reach their personal and professional goals at the earliest.

 

• Recall the ""What, Why, Where, and How"" of an effective coaching 

• Describe the three-step approach to better coaching

Course code: TQ_063
Course type: E-learning course
Duration: 15 Minutes
Language: English
Price: GBP 15,-

All teams need coaches. That’s how they get better. Your role as the leader of a high-performing team is to provide the training, resources, coaching, and support they need—as individuals and as a team—so that they can grow in their abilities, and perform as efficiently and dynamically as possible. Because of today’s constantly evolving business environment, every individual, regardless of position or experience, needs ongoing training and coaching. Knowing which tools, training opportunities, and coaching methods work for each individual is critical. Research by Accenture found that 31% of employees left their jobs because they don’t like their boss; another 31% cited lack of empowerment as their reason for leaving. This lesson will help you build robust coaching connections and a toolkit that will help you develop your team’s skills, coach them to personal and professional success, and build a culture of growth and continuous improvement.

• Define the training needs for your team  

• Provide coaching to your team   

• Create growth opportunities for your team

Course code: TQ_073
Course type: E-learning course
Duration: 15 minutes
Language: English
Price: GBP 15,-

As it’s important for leaders to give constructive feedback, in order to help their employees grow, develop their skills, confidence etc.. which results in organizational growth. Similarly, It’s important for an individual to ask for feedback instead of waiting to receive it. Start thinking of feedback as the fuel for your professional growth. In fact, set a goal to solicit feedback regularly instead of waiting for it to come to you. When you begin to see the value in regular feedback, your manager will find it easier to deliver, and—using these strategies—you’ll find it easier to receive, assess, and apply. Let’s take a look at how you can ensure that your future performance conversations are positive and productive.

 

• Examine the necessity to change your perspective towards feedback

• Identify the behaviors of receiving feedback

• Assess the ways of responding to feedback

Course code: MUK-093
Course type: E-learning course
Duration: 180 Minutes
Language: English
Price: NOK 1500,-

Who is this course for?

All relevant personnel.

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role.

 

How will this course benefit me?

You will be introduced to the purpose of separation.

 

This course contains ten modules:

Module 1: The Purpose of Separation

Module 2: Reservoir Fluids

Module 3: The Principles of Separation

Module 4: Separator Types

Module 5: Separator Construction

Module 6: Multi-stage Separation

Module 7: Separator Control

Module 8: Separator Operation

Module 9: Problems Associated with Separators

Module 10: New Separation Technology

 

How will this course benefit my company?

Ensure you are introduced to separation.

 

What standards are referred to in this course?

The course is made according to industry best practice.

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Hits per page
| 1 ... 11 ... |