Oil and Gas

Course catalogue

hits
163

Forklift with practical training - Module 1.1, 2.2, 3.2, 4.2 and practical ...

Course code: KOL-009
Course type: Classroom course
Duration: 42 hours
Language: Norwegian
Price: Not set

Hensikten med opplæringen er å gi truckførere allsidig praktisk opplæring og øvelse i sikker bruk av truck, slik at ulykker i forbindelse med bruken unngås. Opplæringen skal gi fører så gode kjøreferdigheter at vedkommende selvstendig på en sikker måte skal kunne gjennomføre oppdrag med truck.

Truckfører må imidlertid gjennomføre typeopplæring på den trucken som til enhver tid benyttes i tillegg til sertifisert sikkerhetsopplæring. Opplæringen avsluttes med en praktisk prøve som innbefatter kontroll og bruk av aktuelle trucker.

Bestått praktisk prøve på aktuelle trucker vil være grunnlag for utstedelse av kompetansebevis for fører av truck

Modul 1.1 (8 timer) Arbeidsmiljø, ansvar og konsekvenser

Modul 2.2 (14 timer) Truck 

Modul 3.2 (6 timer) Praktisk bruk

Modul 4.2 Bedriftsoppl. - 20 timer Oppl.virksomhet-14 timer

 

The course is only available in Norwegian.

 

Course code: EXT-011
Course type: Classroom course
Duration: 1 day
Language: Norwegian
Price: From NOK 6000,-

This is a course for electrical installations in potentially explosive areas.

Our goal is to make sure that employees are motivated to work safely and securely.

 

Topics:

• Understand the general principles of type of specific protection and correct labeling of components approved in intrinsically safe facility (IS)

• Current Exi Standard

• Could choose to install the correct Exi equipment in hazardous areas accordance with IEC 60079-14 standards and 60079-25

• How to work safely with IS

• Requirements for competence to perform work on Exi installations

• How to verify and calculate an Exi circuit

 

Standards:

• NEK EN 60079-11

• NEK EN 60079-14

• NEK EN 60079-25

• IEC 60079-11

• IEC 60079-14

• IEC 60079-25

 

This course is only available in Norwegian.

Course code: VTK-005
Course type: Classroom course
Duration: 1 day
Language: Norwegian
Price: From NOK 3900,-

Only in Norwegian

Hovedformålet med kurset er å skape gode holdninger til bruk av riktig verneutstyr, og forhindre at liv og helse går tapt.


Etter kurset skal deltakerne kunne:
- Kjenne til virkemåte og oppbygningen til ulike typer pusteluftkompressorer og pusteluftsystem
- Kjenne til hvilke bestanddeler sikker pusteluft inneholder
- Bruke åndedrettsvern på en trygg og sikker måte
- Utføre daglig renhold/vedlikehold på hodesett og bæresele
- Kjennskap til forskrift 706, kap. 10 og standardene NS-EN-14593, NS-EN 14594 og EN 12021
- Kjenne til kvalitetssikring av pusteluft, målemetoder og utstyr
- Kjenne til hvilke flasker, seler og hodesett som brukes til pusteluft
- Kjenne til farer og utfordringer ved arbeid i miljøer uten sikker pusteluft, og vite hva han/hun selv kan gjøre for å ivareta egen sikkerhet

Kurset inneholder oppgaver og praktiske øvelser.

Course code: WEC-005
Course type: Classroom course
Duration: 16 hours
Language: Norwegian
Price: From NOK 4900,-

Hovedmålet med kurset er å gi deltakerne generelle kunnskaper og ferdigheter som «kompetent person» i periodisk kontroll av ass. fallsikringsutstyr.

Course code: WEC-012
Course type: Classroom course
Duration: 40 hours
Language: Norwegian
Price: From NOK 10910,-

Hovedmålet med kurset er at den som gis opplæring tilegner seg tilstrekkelige kunnskaper om sikker bruk av traverskraner, slik at ulykker ved bruk unngås.

Regelverksreferanse:

Modul 2.7 - 3.7 - 4.7

DPO Start

Course code: KOL-046
Course type: Classroom course
Duration: 32 hours
Language: English (if not otherw ...
Price: Not set

LEARNING OBJECTIVES

By the end of the course the students should have achieved:

• Thorough knowledge  of the practical aspects of DP Operations
• Capability  to plan and conduct any DP Operation, including risk assessment, contingency planning and assessment of vessel capability
• Ability to undertake any operation with due regard to all circumstances of seamanship and operational requirements
• Ability to react correctly to any circumstances which constitute  or could lead to a catastrophic failure

CONTENT

• Study of DP incidents
• Construction  and use of work site diagrams, charts and vessel templates for use in DP operations
• Preparation  of plans for a projected DP operation, contingency plans for expected deviations and emergencies
• Participation  in simulated situations in a variety of DP operations while handling routine and emergency situations
• Risk  and safety analysis, and defining DP equipment classes
• The  DP system’s utilisation of position measurements,and tests on position reference systems.  

LEARNING PROCESS

The training will be a combination of theoretical lessons and practical exercises. The  participants will work with practical scenarios based on real operations, training on planning and executing specified operations under varying simulated conditions, including emergency handling on DNVGL Class A or B approved simulators.

SPECIAL INFORMATION

References:
• IMCA M 117
• IMO MSC Circ.738
• DNV GL RP 0007
• DNV GL ST 0023

CERTIFICATE

Certification of attendance will be issued upon successful completion of the course.

DPO Certification Exam Shuttle Tanker

Course code: KOL-049
Course type: Classroom course
Duration: 1 day (Theoretical ...
Language: English (if not otherw ...
Price: Not set

EXAM OBJECTIVES

This exam tests the skills and competence of a DPO against the requirements given in the competence standard DNV-GL Notation AJ/DPA-WV.

The examination is a thorough test to cover the most important competences for DPO’s irrespective of type of vessel, trade or activity. The test measures how well operation of equipment, duties and tasks are performed, all in compliance with relevant international, national and local regulations and requirements.

EXAM AND CERTIFICATION PROCESS

The test center will upon receipt of the application formsend a notification containing the following:

• Exam date and time
• Exam place
• Terms & conditions
• Recertification requirements
• DNV GL standard for certification ST-0023
• Standard for certification 0032, Appendix A: Examination regulations
• Time schedule for examination

SPECIAL INFORMATION

• DNV GL Standard for certification ST-0032 - Test centre for certification of personnel
• DNV GL standard for certification ST-0033 - Maritime simulator systems
• DNV GL standard for certification ST-0023 - Competence of Dynamic Positioning Operators

Course code: KOL-023
Course type: Classroom course
Duration: 1 day
Language: Norwegian
Price: From NOK 5200,-

Kurset gir en grunnleggende innføring i høytrykkslanger og kuplinger og er et naturlig grunnlag for drifts- og vedlikeholdspersonell som skal foreta inspeksjon og vedlikehold på høytrykksutstyr der slanger inngår som kritiske faktorer i systemet.

Kunne utføre forebyggende inspeksjoner og vedlikehold i henhold til etablerte prosedyrer og leverandørens bruksanvisninger, kunne registrere uregelmessigheter som f.eks høy temperatur, lekkasjer i slanger og kuplinger.

Hensikt:

Etter kurset skal deltagerne ha tilegnet seg kunnskap om høytrykkslanger og kuplinger for å kunne foreta visuell inspeksjon og kontroll for å ivareta sikkerheten, avdekke eventuelle lekkasjer slik at uønskede hendelser ikke oppstår.

Innhold:

Standarder og retningslinjer ( TR 1803 )

Merking og dokumentajon 

Sikkerhetskrav / HMS ved bruk av slanger og kuplinger 

Tabeller for slanger og kuplinger med oppbygning og forståelse 

Inspeksjon og kontroll av slanger

Definisjoner

Bruk av Hose, Dats Sheet

Vedlikeholdskonsept for slanger og kuplinger

Visuel inspeksjon. Gjenger, kuplinger og slanger

 Feil- og degraderingsmekanismer

 Slangelære inkl. Installasjonsgeometri

 Håndtering og oppbevaring av slanger


This course is only available in Norwegian.

DPO Preparation

Course code: KOL-045
Course type: Classroom course
Duration: 32 hours
Language: English (if not otherw ...
Price: Not set

LEARNING OBJECTIVES

At the end of the course, the aim is that the participant should have acquired knowledge of the principles of Dynamic Positioning.

• Set up a dynamic positioning system and have an understanding of the practical operation of associated equipment including position referencing systems
• Recognise and respond to the various alarms, warning and information messages
• Relate the DP installation to the ship’s system e.g. power supply, manoeuvring facility, available position referencing systems and nature of work
• Relate DP Operations to the existing environmental conditions of wind, sea state, current and vessel movement

CONTENT

• Definition of DP, elements of the DP system, DP systems redundancy, and Class Requirements
• Functions of the DP system, and DP principles
• Different types of DP vessels and DP operations, sensors and use of sensor inputs
• Introduction to position reference systems and the DP system’s use of position measurements
• Vessel capability, DP consequence analysis and DP capability analysis
• Thrusters and manoeuvring systems
• Power systems and Blackout Prevention
• Operational procedures for DP operation, and procedures for operating the DP system
• Study of DP incidents
• Principal use of the DP system

LEARNING PROCESS

The training will be a combination of theoretical lessons and practical exercises. During the course each participant will have his own operator station with generic DP software.

REFERENCES

IMCA Guidelines IMCA M 117, IMO MSC Circ. 738 and DNV GLST- 0023-2014-04.

CERTIFICATE

Certification of attendance will be issued upon successful completion of the course.

Course code: NMA-008
Course type: Classroom course
Duration: 5 days
Language: Norwegian
Price: From NOK 14600,-

Only in Norwegian

ECDIS er et pc-basert navigasjonsverktøy som kan brukes som et alternativ til tradisjonelle papirkart, såkalt papirløs navigasjon.

ECDIS og elektroniske kart (ENC) er en total forandring fra å navigere med tradisjonelle papirkart, med mange fordeler og nye muligheter. Brukt på riktig måte kan ECDIS være med på å sikre og effektivisere dagens ”moderne” navigasjon. På den annen side så er det mange nye utfordringer. Manglende kunnskap om ECDIS og om kompleksiteten i elektroniske kart (ENC) vil være en risikofaktor.

Dette kurset gir grunnleggende kunnskaper, ferdigheter og forståelse av ECDIS og elektroniske kart (ENC). Kurset har ikke som mål å lære bort grunnleggende navigasjon, men hvordan man bruker ECDIS til sikker navigering.

ECDIS kurset er i henhold til IMO-modell kurs 1.27 (2012 EDITION), og STCW Chapter II, Section A-II/1 and Table A-II/1, Table A-II/2 og Table A-II/3.


Ved fullført kurs, skal kursdeltakerne:

- kunne bruke ECDIS på det samme trygge og effektive nivå som ved bruk av konvensjonelle papirkart
- ha kunnskap om muligheter og begrensninger med ECDIS
- kunne vurdere all relevant informasjon og kunne gjøre riktige tiltak i tilfelle en feil
- være kompetent og ha fått en god forståelse av elektroniske kart (ENC)
- kjenne operasjonelle prosedyrer
- kjenne til prosedyrer for elektroniske kart (oppdatering, bestilling, permits etc.)

 

Kursinnhold

Kurset er jevnt fordelt mellom teori og praktiske oppgaver på ECDIS med egen brosimulator. 

- Regler og forskrifter 

- ENC 

- Sensorer 

- Ruteplanlegging og monitorering 

- Alarmer 

- Dokumentasjon / back-up 

- Kartoppdatering 

- GNSS 

- Safety settings

Course code: ALT-008
Course type: Classroom course
Duration: 5 days
Language: Norwegian - Exam avail ...
Price: From NOK 17300,-

This course includes all subjects needed to prepare candidates for the rotary drilling well control exam, surface and subsea BOP stack on driller level (Level 3).

This course includes all subjects needed to prepare candidates for the rotary drilling well control exam, surface and subsea BOP stack at supervisor level (Level 4).

A printed course manual and exercise book is provided for all attendees. The IWCF exam is included in the course.

The course has been made on basis of the recommendations for enhancements to well control training, issued by the International Association of Oil & Gas Producers (OGP).

Course Content

- Kick prevention

- Shut in procedures

- Well control methods

- Kill sheet calculations

- Practical simulator training

- Circulation methods

- Practical simulator assessment

- IWCF written exam on the last day (Friday)

Please note! The course is in Norwegian, however you have the option to select the exam language to be English

Course code: KON-002
Course type: Classroom course
Duration: 24 hours
Language: Norwegian and English
Price: From NOK 20000,-

This course is a mandatory retraining course according to NORSOK R003 to provide G5 crane operators with knowledge, understanding and skills in emergency situations of crane operations. The course includes in-depth exercises on a full scale DNV GL Class A crane simulator, supported by a program of lectures and instruction.

The course can be adapted to suit company specific needs, i.e. by using company specific loading/unloading procedures.

The course will enable the participants to handle normal  as well as critical operations i.e.

- Communication
- Planning
 -Use of crane emergency equipment
- Various lift operations under pressure
- Choice of correct actions if unwanted incidents occur

 

Theory:

- Laws and regulations 
- The safety functions of the crane 
- The safe operation of offshore cranes
- Human factors

 

Simulator exercises: 

- Operational limitations of crane operations 
- Communication during crane operations 
- Preparation and planning of crane operations 
- Internal transport on the installation 
- Loading and unloading supply vessels 
- Transport of personnel 
- Crane operation on various installations (fixed/floating)

Course code: STQ-014
Course type: Classroom course
Duration: 3 days
Language: Norwegian
Price: From NOK 7990,-

Objective: The purpose of the training is to provide the prospective winch operator with a good theoretical basic training in the safe use of winches with associated equipment.


The training gives participants good insight into the principles of electric, pneumatic and hydraulically driven winches' design, operation, use and maintenance, so that accidents in connection with winch operations are avoided.


Content:

• Introduction

• Construction and operation

• Name of components

• Certification, marking

• Coil devices, safety equipment

• General safety rules and emergency procedures

• Correct and incorrect use of winches

• Restrictions on use

• Inspection, maintenance and disposal rules for winches, wire ropes, blocks, etc.

• Theoretical exam

Course code: GWO-002
Course type: Classroom course
Duration: 16 hours
Language: Norwegian
Price: From NOK 7920,-

Upon completion of the Global Wind Organization (GWO) Basic Safety Training (BST), delegates will have awareness of the dangers that arise when working in the wind industry and how to control and reduce these dangers.

 

The course covers the requirements for training of personnel and refresher courses both onshore and offshore wind in accordance with:

 

- Global Wind Organization (GWO)

- Labor Inspection (Regulations)

 

Competence for "Working at heights" must be maintained in accordance with. guideline in the GWO standard. It shall be conducted refresher training every 2 years.

Course code: NOG-OER108
Course type: Classroom course
Duration: 3 days
Language: Norwegian
Price: From NOK 11500,-

The object of this course is to provide participants with the knowledge and skills to control and coordinate the available resources at the site in an actual emergency, and to act as a liaison with the central emergency control room on the installation in order to save and protect people's lives and health, limit damage to the environment and safeguard material assets.

Course code: TK-001
Course type: Classroom course
Duration: 1 day
Language: Norwegian
Price: From NOK 3500,-

Section 3-5 of the Working Environment Act requires every organisation’s most senior manager to be able to document training in HSE work. This obligation is personal and may not be delegated, and the completed training must be documented in writing.
The HSE course for managers provides an introduction to the most important aspects of the HSE work, and is undertaken in accordance with the Norwegian Labour Inspection Authority’s guidelines for this type of training. A course certificate is issued upon completion of the course in order to fulfil the written documentation requirement.


The following topics are covered in the HSE course for managers:
– Introduction to the content and structure of the Working Environment Act
– Information about the Working Environment Act’s regulations
– Roles in the HSE work
– Working environment requirements
– Physical and psychosocial working environment
– How to establish, implement and maintain an HSE system at the workplace

Anleggsmaskin - Modul 1.1, 2.1 og 3.1

Course code: KOL-016
Course type: Classroom course
Duration: 40 hours
Language: Norwegian
Price: Not set

Kurset starter med fellesteori som er en grunnleggende innføring i aktuelle lover og forskrifter og en grunnleggende innføring i sikker bruk av arbeidsutstyr. Fagdelen vil gi eleven en god teoretisk grunnopplæring i sikker bruk av masseforflyttingsmaskiner samt en god innsikt i oppbygging, virkemåte, vedlikehold og bruk.

Eleven skal gjennomføre teorimodul 1.1 (8 timer), modul 2.1 (24 timer) og  3.1 (8 timer). Dette skal gi førerne en god generell grunnopplæring i sikker bruk og praktisk forståelse for prinsippene for masseforflytningsmaskiner.

Kurset gjennomføres over 5 dager, og avsluttes med en teoretisk prøve.

Etter bestått teoretisk prøve og gjennomført grunnleggende praktisk bruk modul 3.1 + praksiskjøring 32 timer, kan praktisk prøve gjennomføres. Bestått praktisk prøve vil være grunnlag for utstedelse av kompetansebevis for fører av masseforflyttingsmaskin i valgt klasse.

 

Kursinnhold

- Konstruksjon

- Oppbygging

- Betjening

- Bruksegenskaper

- Bruksområder

- Sikkerhetsutstyr

- Viktige kontrollpunkter

- Vedlikehold


This course in only available in Norwegian.

Course code: KOL-026
Course type: Classroom course
Duration: 4 days
Language: Norwegian
Price: From NOK 11500,-

Kurset er i henhold til NS-EN- 1591-4. Kurset øker kompetansen og gir grunnleggende kunnskaper innen forberedelse, planlegging, utførelse og dokumentering av arbeid med boltetrekking av flensforbindelser på trykksatte systemer.

 

Kurset dekker følgende tabeller i NS-EN 1591-4:

Tabell 1: Foundation level training matrix.

Tabell 2: Training matrix for hydraulic tension tightening.

Tabell 3: Training matrix for hydraulic torque tightening.

Tabell 6: Training matrix for bolt load determination after assembly.

Tabell 7: Training matrix for compact flanges.

Tabell 8: Training matrix for clamp connectors

Tabell 9: Training matrix for special connector/flanges

 

Hensikt: Hensikten med kurset å forhindre skade på personell, miljø og utstyr. Dette kan forebygges ved å styrke kompetansen og øke forståelsen hos den enkelte.

 

This course is only available in Norwegian.

HLO/Søk & Redningslag kombinasjon - repetisjon

Course code: OSC1161
Course type: Classroom course
Duration: 3 days
Language: English, Norwegian
Price: Not set

Oppdatere, vedlikeholde kunnskaper, ferdigheter og holdninger innen sin beredskapsfunksjon i eller relatert til søk og redningslag og HLO. Erfaringsoverføring helivakt og HLO.

Innhold:

Kurset er i hovedsak tillagt praktiske øvelser hvor brief og debrief er tillagt stor vekt.   

Taktisk lagarbeid. 

Røykdykking. 

Slokketeknikker. 

Værrapportering, kommunikajson og rutiner 

- Farlig gods 

- Flydrivstoff 

- Beredskapssituasjoner og normale operasjoner på helikopterdekk 

- Verneutstyr

Course code: WEC-010
Course type: Classroom course
Duration: 40 hours
Language: Norwegian
Price: From NOK 12170,-

Hovedmålet med kurset er at den som gis opplæring tilegner seg tilstrekkelige kunnskaper om sikker bruk av personløftere, slik at ulykker ved bruk unngås.

Regelverksreferanse:

 

F-2699 Statoil rev.

Hits per page