Oil and Gas

Course catalogue

hits
163

Grunnkurs Varme Arbeider

Course code: KOL-020
Course type: Classroom course
Duration: 8 hours
Language: Norwegian
Price: Not set

Varme arbeider innebærer økt brannrisiko. Brannene skyldes ofte menneskelig svikt, mangel på kunnskap og omtanke. Noen av brannene innebærer også tap av arbeidsplasser og av kulturhistoriske bygninger. De som utfører varme arbeider må forstå hvilken brannrisiko varme arbeider innebærer og utføre arbeidet slik at brann ikke oppstår. Derfor har forsikringsselskapene innført krav om sertifikat for de som skal utføre varme arbeider.

 

Sertifikat for varme arbeider har en gyldighet på 5 år.


This course is only available in Norwegian.

Course code: NOG-OFA101-REP
Course type: Classroom course
Duration: 2 days
Language: Norwegian
Price: From NOK 6500,-

The object of this course is to help course participants maintain and develop their knowledge, skills and attitudes regarding their role in an emergency response situation.

 

A representative selection of the content of the basic first aid course adapted to the prior knowledge of the students with major emphasis on practical training and drills.

 

Course is valid for 12 months (may be taken on board).

Course is valid for 24 months on offshore service vessels.

Course code: OSC1161
Course type: Classroom course
Duration: Not set
Language: Norwegian
Price: From NOK 17900,-

Oppdatere, vedlikeholde kunnskaper, ferdigheter og holdninger innen sin beredskapsfunksjon i eller relatert til søk og redningslag og HLO. Erfaringsoverføring helivakt og HLO

 

Kurset er i hovedsak tillagt praktiske øvelser hvor brief og debrief er tillagt stor vekt.   

Taktisk lagarbeid. 

Røykdykking. 

Slokketeknikker. 

Værrapportering, kommunikajson og rutiner 

- Farlig gods 

- Flydrivstoff 

- Beredskapssituasjoner og normale operasjoner på helikopterdekk 

- Verneutstyr   

 

Deler av kurset kan bli gjennomført på engelsk.

 

Offshore Crane Advanced

Course code: KOL-050
Course type: Classroom course
Duration: 24 hours
Language: English (if not otherw ...
Price: Not set

LEARNING OBJECTIVES

The course will enable the participants to handle normal as well as critical operations i.e.
• Communication
• Planning
• Use of crane emergency equipment
• Various lift operations under pressure
• Choice of correct actions if unwanted incidents occur

CONTENT

Theoretical part:
• Laws and regulations
• The safety functions of the crane
• The safe operation of offshore cranes
• Human factors
Simulator exercises:
• Operational limitations of crane operations
• Communication during crane operations
• Preparation and planning of crane operations
• Internal transport on the installation
• Loading and unloading supply vessels
• Transport of personnel
• Crane operation on various installations (fixed/ floating)

LEARNING PROCESS

This course is designed to enable crane operators/trainees on various installations the knowledge, understanding and skills within emergency situations of crane operations.

This is achieved through in-depth exercises on a full scale crane DNV GL Class A simulator, supported by a program of lectures and instruction.

The theory will cover communications, procedures, crane safety systems and operational scenarios at various installations during different weather conditions.

SPECIAL INFORMATION

References: NORSOK R003

The course can be personalised to suit company specific needs e.g. the use of specific installations and selected scenarios.

CERTIFICATE

Certification of attendance will be issued upon successful completion of the course.

Course code: ALT-005
Course type: Classroom course
Duration: 4 days
Language: Norwegian
Price: From NOK 17300,-

The content follow the syllabus issued from IWCF.


  • General well control principles
  • Risk assessment
  • Hydrostatic pressure
  • Formation pressures
  • Primary & secondary well control
  • Well control equipment
  • Subsea and surface equipment
  • Well barrier concept
  • Kick causes
  • Kick detection
  • Influx characteristics and behavior
  • Well control methods
  • Inflow testing
Course code: STQ-011
Course type: Classroom course
Duration: Theoretical e-learn ...
Language: Norwegian
Price: From NOK 13500,-

Objective: The purpose of the training is to provide personnel working with load securing with basic training in load securing and user control of load carriers.


The course satisfies the requirement for documented training in the Regulations on the performance of work best. no. 703, Norsok R-003N and NOG 116, and is carried out with theory and practice according to training plan O-2.6.

The course consists of 4 hours of theoretical e-learning and 16 hours of practical training in classrooms / practice rooms.

The practical training ends with a practical test to ensure that each participant has acquired sufficient knowledge of:

- Proper use of personal protective equipment
- User control of load carriers and assessment of whether it can be used
- Plan and carry out packing and securing of a given load
- Correct securing of the work area
- Choose the right load carrier
- Proper use of various load securing equipment


Content theory

- Introduction
- Unwanted events and non-conformance reporting
- Risk assessment
- Regulations, standards and NOG guidance
- Documentation
- Personal protective equipment
- Various load carriers, planning, user control and packaging
- Use and control of load securing equipment
- Theoretical exam

Practical exercises

- Use of personal protective equipment
- Implementation of user control
- Plan and carry out loading and securing of cargo
- Proper use of auxiliary tools
- Checklists
- Safety during work
- Use of barriers
- Practical exam

Course code: KOL-024
Course type: Classroom course
Duration: 2 days
Language: English
Price: From NOK 8400,-

Deltakerne vil få en god og sikker innføring i høytrykkstestingsutstyr, teori og praksis. Etter endt kurs skal deltakerne kunne bruke trykkstestingsutstyr på en sikker måte, slik at ulykker og skader unngås.

Hensikt:

Hensikt: Hensikten med innføringskurs i trykktesting er å gi den enkelte kursdeltager de grunnleggende kunnskaper om forberedelser, planlegging, utførelse og dokumentering av trykktesting som disiplin.

Innhold:

Svakheter i sammenføyninger og materialer

Omregningstabeller PSI - BAR

Hydrostatisk og Pneumatisk trykktesting

Sikkerhet ved trykktesting og fysiske barierer

HMS - Bruk av personlig verneutstyr

Generelle prosedyrer ved trykktesting / Eksempel

Fittings og høytrykkslanger - Trykklasser

Gjengetyper, flenser, ventiler, pakninger og bolter

Ulike metoder for trykktesting

Trykktestingsutstyr

Bruk av trykktestingsutstyr i praksis. Trykktesting

 

This course is only available in Norwegian.

Course code: MSE1001
Course type: Classroom course
Duration: 16 hours
Language: Norwegian
Price: From NOK 9900,-

Enkle løfteinnretninger. Modul P-2.4

Course code: KOL-013
Course type: Classroom course
Duration: 2 days / 16 hours
Language: Norwegian
Price: Not set

Hensikten med kurset er å gi blivende riggere en god teoretisk grunnopplæring i sikker bruk av: Fallsikringsutstyr og enkle løfteinnretninger (enkle travers- og søylesvingkraner, håndtaljer, luft- og eltaljer og transportable vinsjer.Opplæringen gir kandidaten god innsikt i prinsippene for fallsikringsutstyrs, enkle løfteinnretningers og transportable vinsjers konstruksjon, virkemåte, bruk og vedlikehold, slik at uhell og ulykker i forbindelse med riggeoperasjoner unngås.

Deltakeren må ha fullført G11 stroppekurs før kursstart.

Opplæringen dekker den nødvendige teoretiske som er nødvendig for å kunne gjennomføre det praktiske riggekurset, Modul O 3.2.

Kurset avsluttes med en teoretisk prøve. 


Kursinnhold
- Fallsikringsutstyr
- Travers- og søyle- svingkraner
- Håndtaljer, luft- og el-taljer
- Transportable vinsjer
- Avsluttende teoretisk prøve

This course is only available in Norwegian.

Course code: KON-001
Course type: Classroom course
Duration: 16 hours
Language: English
Price: From NOK 17000,-

In-depth training on a full-scale DNV GL Class A crane simulator, supported by a program of lectures and instruction. The course covers various types of loads and external forces affecting the load on crane and vessel.

The course can be adapted to suit company-specific needs regarding the choice of loading / unloading procedures and exercises.

This course will give the candidates basic knowledge, understanding and practical skills within:

- Lifting operations
- Forces
- Communication
- Planning
- Procedures
- Limitations
- Safety functions 
- Start / stop procedures 
- Operational limitations of crane operations 
- Communication during crane operations 
- Preparation and planning of crane operations 
- Internal transport on the installation 
- Loading and unloading supply vessels 
- Crane operation on various fixed and floating installations

Course code: STQ-008
Course type: Classroom course
Duration: 3 days
Language: Norwegian / English
Price: From NOK 23490,-

Objective: The aim of the training is that those who are given training receive a repetition of acquired competence in theoretical and practical understanding of safe work operations / emergency operations with offshore cranes so that accidents and incidents can be avoided.


The aim of the training is that those who are given training receive a repetition of acquired competence in theoretical and practical understanding of safe work operations / emergency operations with offshore cranes so that accidents and incidents can be avoided.

The training is according to training plan module P-4.1.1 covers repetition requirements in NORSOK R-003.

Validity:

3 years according to NORSOK
2 years according to OPITO

Holders of a G5 certificate must meet the requirements for updating through module P-4.1.1 "Offshore crane simulator" within three years, and then update this every three years. If this update is not carried out the certificate is still valid, but the G5 certificate holder cannot operate a crane until the requirements for the simulator training have been completed.


Content:

- Introduction
- Accidents and accidents with offshore cranes
- Laws, regulations, standards, regarding offshore cranes
- Operational limitations of crane operations
- Planning of lifting operations (TBT, SJA, Work permits)
- Internal lifting, loading and lifting from / to supply boats, critical lifts, transport of personnel
- Emergency operations
- Communication
- Practical operations use of simulator
- Theoretical and practical exam

Course code: WEC-008
Course type: Classroom course
Duration: Not set
Language: Not set
Price: From NOK 7340,-
Course code: MAE-004
Course type: Classroom course
Duration: 2 days
Language: Norwegian
Price: From NOK 10180,-

The most common well problems
Upon completion of this course, participants should be able to give an account of the construction process of a production well, and the equipment that is used for completion. In addition to this, they should be able to describe the most common problems that affect wells, as well as giving an account of how these can be solved.

 

Course Content

Formation research:

 - Seismic data

- MWD/LWD

 

Design of completion string:

- Production pipes

- Installation, steel quality, loads

- Temperature

- Pressure conditions in the well

- Perforation

- Completion of horizontal wells/multi-boundary wells

 

Design of completion liquid:

- Well and packer fluid, oil and water based etc.

- Permeability and viscosity

 

Completion equipment:

- Well head and Christmas tree

- Function of Christmas tree on a platform completed well

- Putting in production pipes/lines

- Production pipe gaskets

- Well safety valves (SCSSV)

- Compensatory equipment/expansion joints

- Anchoring profiles

- Sliding sleeves

 

Completion equipment, cont.:

- Side pockets

- Pipe reinforcements

- Lower part of production pipe

 

Well stimulation:

- Sand control/Gas lift

- Methods of chemical injection/acidizing

- Water and gas injection

- Gravel pack

 

Wells completed on the sea bed:

- Guide frame

- Christmas tree

- Well head

- Control system

- Underwater joints

- Protective structure

- ROV/ROT

 

Well Maintenance

 

Wireline operations:

- Equipment and principles

- Advantages and limitations when using wireline operations

 

Coiled tubing:

- Equipment and principles

- Advantages and limitations when operating coiled tubing

 

Hydraulic well overhauling (snubbing)

- Equipment and principles

- Advantages and limitations of hydraulic well overhaul operation

 

The course can also be arranged internally and can be tailor-made for individual companies.

Course code: WEC-006
Course type: Classroom course
Duration: 24 hours
Language: Norwegian
Price: From NOK 5660,-

Hovedmålet med kurset er at den som gis opplæring tilegner seg tilstrekkelige kunnskaper om sikker bruk av løfteredskap slik at ulykker ved bruk unngås.

Regelverksreferanse:

Modul 1 - 2.3

Offshore loading Phase 3

Course code: KOL-054
Course type: Classroom course
Duration: 26 hours
Language: English (if not otherw ...
Price: Not set

LEARNING OBJECTIVES

The phase 3 course is a refresher course and focuses on experience exchange. The course repeats elements from the phase 2 with regards to handling shuttle tankers in close proximity to loading buoys.

The objective is to learn from the experiences of colleagues, and in such a way achieve optimal skills and understanding on how to handle a shuttle tanker in DP mode. The course participants will also be introduced to new developments within DP as for example reference systems, software versions, new loadingconcepts, updated procedures etc.

CONTENT

• Discussions on unwanted incidents involving shuttle tankers
• Focus on the proper use of procedures relating to diffferent oil fields and the use of DP checklists
• The latest development and statistics in Shuttle Tankers DP incidents
• The latest development of offshore loading manuals and development of new Oil fields
• The latest development of positions reference systems for DP and correct use of them
• Repetition of MCRM (Maritime Crew Recourse Management). Principles for teamwork
• The latest editions of competence requirements and guidelines

LEARNING PROCESS

All approaches to the loading buoys are carried out by using Dynamic Positioning Systems, according to procedures. 

Simulations also include reconstruction of known DP incidents involving shuttle tankers. The complexity of these exercises will be based on the experience of the person “in charge” on the bridge simulator.

SPECIAL INFORMATION

References:
• Equinor Competence Requirements for Shuttle Tanker Personnel, WR 2394
• OGUK Tandem Loading Guidelines Volume 1
• Teekay Competence Requirements, SP 0961

CERTIFICATE

Certification of attendance will be issued on successful completion of the course. 

Course code: GWO-001
Course type: Classroom course
Duration: 4 hours
Language: Norwegian
Price: From NOK 2500,-

Upon completion of the Global Wind Organization (GWO) Basic Safety Training (BST), delegates will have awareness of the dangers that arise when working in the wind industry and how to control and reduce these dangers.

The course participants will gain the knowledge and skills to handle manual lifting properly and ensure their own safety with proper lifting in accordance with ergonomics.

The aim of this module is to encourage positive manual handling behavior and train delegates ability to perform manual handling tasks in a safe manner in the wind turbine industry / environment.

The course covers the requirements for training of personnel and refresher courses both onshore and offshore wind in accordance with:

 

- Global Wind Organization (GWO)

- Labor Inspection (Regulations)

 

Competence for "Manual handling" must be maintained in accordance with guideline in the GWO standard. It shall be conducted refresher training every 2 years.

Course code: NMA-003
Course type: Classroom course
Duration: 16 hours
Language: Norwegian and English
Price: From NOK 8877,-

Kurset inneholder obligatoriske minstekrav til repetisjon av redning, førstehjelp og brann. Kurset skal repeteres hvert 5. år.

 

Kurset følger Emneplan grunnleggende sikkerhetskurs oppdatering

- STCW tabell A-VI/1-1 Personlige redningsteknikker

- STCW tabell A-VI/1-2 Forebyggende brannvern og brannslokking

- STCW tabell A-VI/1-3 Grunnleggende førstehjelp

Course code: WEC-001
Course type: Classroom course
Duration: 8 hours
Language: Norwegian
Price: From NOK 3990,-

Hovedmålet med opplæringen er å gi en innføring i Norsok standard R-003 og R-005 slik at kursdeltakerne blir familisert med - og kan bruke Norsok standard som oppslag i sitt daglige arbeid.

Regelverksreferanse:

Modul O-1.2

Course code: STQ-005
Course type: Classroom course
Duration: 1 day
Language: Norwegian
Price: From NOK 5700,-

Objective: The course gives personnel a good theoretical and practical basic training in casting the socket according to EN 13411-4


The course gives personnel a good theoretical and practical basic training in casting the socket according to EN 13411-4. The training is for personnel who in their daily work will use or use steel ropes. This can be deck personnel, sailors, drilling personnel, crane operators or inspectors.

The course lasts 1 day (8 hours).


Content:

- Introduction
- Regulations
- Steel rope
- Sockets casting theory according to standard EN-13411-4
- Protective measures during casting
- Practical casting
- Cutting of steel ropes
- Preparation
- Cleaning
- Casting
- Control
- Exam

Course code: NMA-001
Course type: Classroom course
Duration: 5 days
Language: Norwegian
Price: From NOK 16500,-

Only in Norwegian

Kurset gir deltakerne kompetanse til å:

- Overleve til sjøs i tilfeller der skipet må forlates (tabell VI/1-1)
- Minimalisere risikoen for brann og opprettholde beredskap for å håndtere nødsituasjoner som involverer brann. Bekjempe og slokke branner (tabell VI/1-2)
- Handle omgående ved kjennskap til en ulykke eller annen medisinsk nødsituasjon (tabell VI/1-3).
- Følge nødprosedyrer. Ta forholdsregler for å hindre forurensning av det marine miljøet. Følge trygge arbeidsrutiner. Forstå ordrer og bli forstått i relasjon til plikter om bord på skip. Bidra til gode menneskelige relasjoner om bord på skip (tabell VI/1-4)

 

Kursinnhold

Kurset inneholder obligatoriske minstekrav til grunnleggende sikkerhetsopplæring for alle sjøfolk i henhold til STCW konvensjonen og består av 4 deler:
- Personlige redningsteknikker (tabell A-VI/1-1)
- Forebyggende brannvern og brannslokking (tabell A-VI/1-2)
- Grunnleggende førstehjelp (tabell A-VI/1-3) 
- Personlig sikkerhet og omsorg for menneskeliv og miljø (tabell A-VI/1-4)

Hits per page