Oil and Gas

Course catalogue

hits
163

G5 offshorekran modul O-2.1

Course code: KOL-010
Course type: Classroom course
Duration: 5 days / 40 hours
Language: Norwegian
Price: Not set

Dette kurset vil gi fremtidige kranførere en god teoretisk grunnopplæring i sikker bruk av offshorekran. Opplæringen gir kandidatene god innsikt i prinsippene for offshorekraners konstruksjon, virkemåte, vedlikehold og bruk slik at uhell og ulykker i forbindelse med løfteoperasjoner unngås. Opplæringen dekker den teoretiske sikkerhetsopplæringen som kreves for G5 offshorekran, samt G20 fastmontert hydraulisk kran. Kurset avsluttes med en skriftlig teoretisk prøve. Når opplært person har bestått teoretisk prøve, samt eksamen for anhukere med tillegg av praktisk kjøreprøve på offshorekran, vil dette være grunnlag for utstedelse av kompetansebevis for fører av G5 offshorekran.

Kursinnhold:

- Innledning med definisjon på offshorekran

- Bruksområder for offshorekraner, fastmonterte hydrauliske kraner

- Ulykker med offshorekraner

- Lover og forskrifter vedr. offshorekraner 

- Krav til kranfører

- Oppbygging, konstruksjon og montering av forskjellige typer offshorekraner

- Fundament / pidestall

- Bomkonstruksjoner

- Elektrisk anlegg

- Hydraulikk / elektronikk

- Mekanikk

- Lastdiagram

- Sikkerhets- / overlastutstyr

- Vinsj / Ståltau / blokk 

- Kontroll og vedlikehold

- Sertifisering / dokumentasjon

- Sikker bruk av offshorekraner

- Øvingsoppgaver og eksamen




This course is only available in Norwegian.

Course code: NMA-006
Course type: Classroom course
Duration: 2 days
Language: Norwegian
Price: From NOK 4800,-

Only in Norwegian

Etter gjennomført opplæring skal deltagerne ha kunnskaper og ferdigheter i å reagere og handle ved alarm, samt følge nødprosedyrer. Sikre effektiv evakuering av fartøyet og ivareta passasjerer og mannskap i en evakueringssituasjon.

Kursinnhold er i henhold til STCW-95, tabell A-V/2 og A-V/3.

Kursinnhold
- Organisere nødprosedyrer om bord 
- Skipets konstruksjon med muligheter og begrensninger 
- Beredskapsplaner og nødprosedyrer 
- Optimalisere bruk av ressurser 
- Ressursutnyttelse / øvelsemønstre 
- Styre tiltakene i en nødsituasjon 
- Organisasjon 
- Ledelse 
- Kommunikasjon 
- Håndtering av passasjerer og annet personell i nødsituasjoner 
- Bevissthet om allmenne reaksjonsmønstre 
- Etablere og opprettholde effektiv kommunikasjon 
- Betydningen av å etablere og opprettholde effektiv kommunikasjon 
- Praktiske øvelser 
- Gruppeoppgaver 
- Veiledning og instruksjon under vanskelige forhold

G4 Traverskran Modul 1.1, 2.3, 2.7 + 3.7

Course code: KOL-011
Course type: Classroom course
Duration: 40 hours
Language: Norwegian
Price: Not set

Kurset vil gi kranoperatører en god teoretisk grunnopplæring på bro og traverskraner slik at uhell og ulykker i forbindelse med løfteoparsjoner unngås. Opplæringen gir kandidatene god innsikt i prinsippene for traverskraners konstruksjon,virkemåte, vedlikehold og bruk. Ved bestått teoretisk og praktisk prøve, vil det gi grunnlag for utstedelse av kompetansebevis G4 Bro-og traverskraner.

Kursinnhold
- G11 Stropp og anhuker opplæring (se KOL-001)
- Innledning med krav til kranførerer
- Bruksområder for traverskraner
- Ulykker med bro- og traverskraner
- Oppbygging av forskjellige typer bro- og traverskraner
- Elektrisk anlegg på bro- og traverskraner
- Sikkerhetsbrytere
- Ståltau / blokk
- Sertifisering / dokumentasjon
- Kontroll og vedlikehold, sikkerhetsregler ved bruk

- Øvingsoppgaver 

- Eksamen

 

Modul 1.1 (8 timer) Arbeidsmiljø, ansvar og konsekvenser

Modul 2.3 (16 timer) G11- Løfteredskap 

Modul 2.7 (16 timer) G4- Bro- og Traverskran 

Modul 3.7 - G4 (8 timer) Praktisk bruk

 

This course is only available in Norwegian.

Course code: STQ-004
Course type: Classroom course
Duration: 2 days
Language: Norwegian
Price: From NOK 7300,-

Objective: The training is intended to provide personnel with good theoretical and practical basic training in the use and maintenance of steel ropes.


The course provides a thorough introduction to knowledge about steel ropes, the correct use / choice of steel ropes and what requirements are set for those who use and control steel ropes.

Regulations on the performance of work, use of work equipment and associated technical requirements (regulations on the performance of work) §10-1. Requirement for documented safety training for work equipment that requires special care during use 

When an employer after a risk assessment finds that the work equipment requires special care during use, only employees who have documented safety training according to §10-2 §10-2 can be used. Requirements for documented safety training when using work equipment

Anyone who is to use work equipment as mentioned in §10-1 and §10-3, must have practical and theoretical training that provides knowledge of construction, operation, use properties and area of use, as well as maintenance and control.


Content:

- Basic theory of steel ropes
- Construction
- Properties
- End parties
- Cast blocks / Wire discs
- The right choice of wire rope
- Proper use of wire ropes
- Proper winding and running in of steel ropes
- Maintenance of steel ropes
- Lubrication of steel ropes
- Damage to steel ropes
- Disposal rules
- Checking of wire ropes in accordance with standard ISO-4309
- Exam

Course code: EXT-009
Course type: Classroom course
Duration: 1 day
Language: Norwegian
Price: From NOK 6000,-

This is a course for electrical installations in potentially explosive areas.

Our goal is to make sure that employees are motivated to work safely and securely.   


Topics:

• General principles for explosion protection

• Area classification and zone division

• Gas groups and the connection between area and equipment

• Temperature classes and the connection between area and equipment

• The general principles for type of protection and labeling

 

Standards:

• NEK 420

• IEC / NEK EN 60079-10-1

• IEC / NEK EN 60079-14

 

This course is only available in Norwegian.

Course code: GWO-004
Course type: Classroom course
Duration: 4 hours
Language: Norwegian
Price: From NOK 3100,-

Basic Fire Awareness for the wind industry.

Upon completion of the Global Wind Organization (GWO) Basic Safety Training (BST), delegates will have awareness of the dangers that arise when working in the wind industry and how to control and reduce these dangers.

The course covers the requirements for training of personnel and refresher courses both onshore and offshore wind in accordance with:

 

- Global Wind Organization (GWO)

- Labor Inspection (Regulations)

 

Competence for "Fire Awareness" must be maintained in accordance with. guideline in the GWO standard. It shall be conducted refresher training every 2 years.

Norwegian only

Redningsfarkoster og MOB-båter, STCW A-VI/2-1 - Oppdatering

Course code: NMA-009
Course type: Classroom course
Duration: 1 day / 8 hours
Language: English, Norwegian
Price: Not set

Minstekrav til kompetanse for redningsfarkoster og mann-overbord-båter unntatt hurtiggående mann-overbord-båter. STCW tabell A-VI/2-1

Innhold:

 

Lede, sjøsette og betjene båt og utstyr. 

Organisere og lede evakuering fra skip ved hjelp av redningsfarkost. 

Klargjøre livbåten, organisere ombordstigning, låre og frigjøre båten, manøvrere og lede operasjonen av livbåten på vannet. 

Metoder for å starte og betjene motor med tilbehør på redningsfarkost sammen med bruk av farkostens brannslokkingsapparat.   

 

Metode for helikopterredning.

Course code: NMA-007
Course type: Classroom course
Duration: 2 days
Language: Norwegian
Price: From NOK 6600,-

This course is available in Norwegian only.

Kurs for personell som skal tjenestegjøre som SSO om bord på skip eller flyttbare innrettninger. Etter 1/7-09 må personell inneha "Certificate of proficiency". Dette er et sertifikat som utstedes etter gjennomført og bestått kurs. ISPS er IMOs internasjonale kode for sikkerhet og terrorberedskap på skip og i havneterminaler. 

Course code: TOS-006
Course type: Classroom course
Duration: 6,0 t
Language: Norwegian
Price: From NOK 9500,-
Course code: EXT-13
Course type: Classroom course
Duration: Not set
Language: Not set
Price: From NOK 21400,-
Course code: KON-003
Course type: Classroom course
Duration: 34 hours
Language: Norwegian and English
Price: From NOK 26500,-

This course is intended for Dynamic Positioning Operators (DPO) with a certificate from the Nautical Institute that are unable to revalidate their DPO certificate due to insufficient DP sea time.

By the end of the course the participants shall:

- Have acquired knowledge of the latest rules and regulations
- Have acquired knowledge of the latest developments within sensors and Position Reference Systems (PRS)
- Have acquired knowledge of the latest relevant DP incidents and why they occurred
- Be able to recognize the various alarm, warning and information messages
- Carry out operational planning, risk assessment and hazard identification tasks
- Set up the DP system for a particular task/operation
- Decide on courses of action because of system failure


The course is conducted as classroom training, combining theoretical presentation  and practical work/discussion with exercises in simulator and guidance. For practical capabilities and skills, exercises are performed in fully equipped DP simulator. This course will fulfil the revalidation learning objectives as specified by Nautical institute.

 

Course code: GAN-014
Course type: Classroom course
Duration: 8 hours
Language: Norwegian
Price: From NOK 3900,-

Kurset er en påbygging på ordinært truckførerbevis for trucker t.o.m. 10 tonn, og vil gi deltagerne den kompetanseheving som skal til for å kunne betjene stortruck sikkert, slik at uhell og ulykker unngås.

 

 

Innhold

 

- Krav til Truckfører

- Ulykker med stortruck

- Truckens virkemåte og konstruksjon

- Stabilitet

- Godshåndtering

- Kontroll og vedlikehold

- Sikkerhetsregler ved bruk

- Sertifisering/dokumentasjon

 

 

 

Etter bestått teoretisk prøve og gjennomført grunnleggende praktisk bruk + praksiskjøring, kan praktisk prøve gjennomføres. Bestått praktisk prøve vil være grunnlag for utstedelse av kompetansebevis for fører av truck over 10 000 kg, i aktuell klasse.

 

This course is only available in Norwegian.

Course code: EXT-010
Course type: Classroom course
Duration: 1 day
Language: Norwegian
Price: From NOK 6000,-

This is a course for electrical installations in potentially explosive areas.

Objective: Our goal is to make sure that employees are motivated to work safely and securely.

 

Topics:

• General principles of explosion protection 

• Site classification and zone section 

• Gas groups and the connection between site and equipment 

• Temperature classes and the connection between the site and equipment 

• General principles for the type of protection and tagging 

• Inspection and maintenance in explosive environment 

• How maintenance work is carried out in explosive environment

• What the participant can do itself, and what needs to be submitted to the authorized repair shop

 

Standards:

• NEK 420

• IEC / NEK EN 60079-10-1

• IEC / NEK EN 60079-14


This course is only available in Norwegian.

Course code: STQ-001
Course type: Classroom course
Duration: 3 days
Language: Norwegian / English
Price: From NOK 5990,-

Objective: To give the person who is to work with a traverse crane knowledge about safe use, daily control and maintenance as well as competence to avoid accidents and incidents.


The authorities set requirements for basic safety certification of persons who are to operate bridge and overhead cranes. The requirements include both theoretical and practical training

G4 Bridge and Traverse Crane Basic course consists of modules 2.7 and 3.7. To complete the course, you must take and pass a theoretical exam.

Proper use of overhead cranes is of great importance for the safety of crane operators and other personnel who participate in lifting operations. Incorrect assessments can have major consequences and lead to serious injuries to the crane driver, other personnel as well as equipment and surroundings. Positive attitudes towards safety are therefore important during training.

The crane driver training for G4 consists of five modules:

- Module 1.1 working environment, responsibilities and consequences. *
- Module 2.3 G11 Lifting gear (strap and sling).
- Module 2.7 G4 bridge and overhead crane
- Module 3.7 Basic practical training G4
- Module 4.7 Practical driving training G4
- Practical Final test G4

* Module 1.1 is common to machine, forklift and crane. If you can not document that you have module 1.1 from before that is not older than 3 years, this must be taken again.

Module 4.7 can be completed in a company using a sponsorship arrangement. If you do not have the opportunity to do so, you can participate in one of STQ's practice courses.


Content:

- Introduction with requirements for the driver
- Applications for overhead cranes
- Accidents with bridge and overhead cranes
- Construction of different types
- Electrical system on bridge and traverse cranes
- Safety switches
- Steel rope / block
- Certification / documentation
- Inspection and maintenance
- Main components
- Checkpoints
- Overload safety equipment
- Practical use of lifting equipment
- Driving technique

Course code: STQ-010
Course type: Classroom course
Duration: 1 day
Language: Norwegian
Price: From NOK 4990,-

Objective: Through a combination of theory and practical training, this course provides participants with the necessary knowledge on how to perform rescue from enclosed spaces.


The Norwegian Labor Inspection Authority has made major changes to the regulations. People who work in tanks and closed rooms are the biggest difference that the regulation "Work in tanks" has fallen away. This is replaced by section 29 of the regulations «execution of work», which states that all work in closed rooms shall be performed «without danger to life or health». A simple requirement that gives the employer a great deal of responsibility.

New SOLAS requirements: Exercises in closed rooms and rescue, as well as portable gas measuring equipment.

Applies to: All ships covered by SOLAS and all high-speed vessels, mobile offshore drilling units and dynamically positioned vessels

Our courses are in accordance with SOLAS-IMO requirements and the Norwegian Labor Inspection Authority - Execution of work

The definitions of a cramped space vary from country to country, but the usual criteria usually include:

- A room that is predominantly or completely closed
- Contains health and / or safety hazards
- Is not designed for continuous stay of employees
- Has entrances or exits that are small or difficult to access
- A room that is large enough that you can enter it completely and perform the work tasks you have been assigned
- Limited air circulation


Content:

- Knowledge of public laws and regulations
- Know which constituents a safe breathing air contains
- How to make a gas measurement before entering
- Planning of entry jobs and rescue operations in closed rooms
- Equipment knowledge
- Exercises in entry and use of fall protection equipment, rescue equipment, breathing air equipment and gas meter
- Implementation of rescue work in connection with closed and cramped rooms
- Rigging of fall protection and rescue equipment
- Patient management

Course code: STQ-007
Course type: Classroom course
Duration: 3 days
Language: Norwegian / English
Price: From NOK 5490,-

Objective: The purpose of the training is to provide crane operators, banksman / signalers with good general basic training in the safe use of lifting equipment, so that accidents and incidents in connection with use are avoided.


The authorities set requirements for basic safety certification of persons who are to drive forklifts, mass transfer machines and cranes. The requirements include both theoretical and practical training. To complete the common theory, one must take and pass a theoretical exam.

The G11 Lifting equipment Module 2.3 course gives you who will work with lifting equipment knowledge about safety, daily control and maintenance as well as disposal rules for various lifting equipment. We want to give you a conscious attitude to the dangers that can arise and how to avoid them. Our G11 course is led by instructors with great competence and practical experience from the use of lifting equipment.

Module 1.1 Working environment, responsibilities and consequences are common to machine, forklift and crane. If you can document that you have module 1.1 from before that is not older than 3 years, you can start right on module 2.3.


Contents Module 1.1

- Laws and regulations
- Working environment, responsibilities and consequences
- Environmental
- Safety regulations
- Dangerous goods, marking and handling

Contents Module 2.3

- Laws and regulations
- Work equipment and accessories
- Construction and operation
- Lifting gear
- Control and inspection
- Cargo handling
- Work environment
- Dangerous cargo
- Final theoretical test

Course code: VTK-007
Course type: Classroom course
Duration: 1 day
Language: Norwegian
Price: From NOK 4750,-

Kurset skal gi deltakerne opplæring i sikkerhetsbarrierer og tiltak ved fylling av flasker og bruk av gassboosterpumpe. Kurset tar for seg pressluftflasker, nitrogenflasker og andre typer gassflasker.


Kursinnhold:

Høytrykksfylleanleggets tekniske oppbygning

Gassboosterpumpens oppbygning og sikkerhetsbarrierer

Bestanddeler i sikker pusteluft

Luftanalyse

Nitrogen, bruksområder og egenskaper

Hvordan fylle pressluftflasker og gassflasker på en sikker og forsvarlig måte

Bruk av gassboosterpumpe

Service- og kontrollrutiner for pressluftflasker og gassflasker

Merking av pressluftflasker og gassflasker

Skadenivåer på flasker- gjenkjenne de ulike nivåene

Sikkerhetsregler for drift og vedlikehold av fylleanlegg

Sikkerhetstiltak og barrierer som skal hindre overfylling

Praktiske øvelser med bruk av fylleanlegg og gassboosterpumpe

Avsluttende, praktisk prøve

 

Hovedmålet Etter kurset skal deltakerne kunne fylle flasker og betjene bassboosterpumpe på en trygg og forsvarlig måte.

 

Deltakeravgiften inkluderer kursdeltakelse, dokumentasjon, kursbevis og lunsj.

Course code: GAN-013
Course type: Classroom course
Duration: 12 hours
Language: Norwegian
Price: From NOK 3025,-

Grunnleggende sikkerhetsopplæring for bruk av VHF/SRC utstyr. Kurset passer for fritidsbåtbrukere, samt ansatte offshore og på land som har behov for å bruke VHF-radio i tjenesten. Det er et internasjonalt krav at maritimt VHF radioutstyr skal betjenes av personer som innehar VHF-sertifikat.

 

Kursinnhold

-DSC

-Holdninger til radiokommunikasjon

-Generelt om bruk av VHF/SRC

-Radioreglement

-Nødprosedyrer

-Hasteprosedyrer

-Tryggingsprosedyrer

-Kystradiotjeneste

-Eksamen gjennom Telenor Maritim Radio

Course code: KOL-006
Course type: Classroom course
Duration: 28 hours
Language: Norwegian
Price: From NOK 7400,-

Hensikten med opplæringen er å gi truckførere allsidig praktisk opplæring og øvelse i sikker bruk av truck, slik at ulykker i forbindelse med bruken unngås. Opplæringen skal gi fører så gode kjøreferdigheter at vedkommende selvstendig på en sikker måte skal kunne gjennomføre oppdrag med truck.

Truckfører må imidlertid gjennomføre typeopplæring på den trucken som til enhver tid benyttes i tillegg til sertifisert sikkerhetsopplæring. Opplæringen avsluttes med en praktisk prøve som innbefatter kontroll og bruk av aktuelle trucker.

Bestått praktisk prøve på aktuelle trucker vil være grunnlag for utstedelse av kompetansebevis for fører av truck

Modul 1.1 (8 timer) Arbeidsmiljø, ansvar og konsekvenser

Modul 2.2 (14 timer) Truck 

Modul 3.2 (6 timer) Praktisk bruk


This course is only available in Norwegian.

G8: Lastebilkran - Modul 2.8 og 3.8

Course code: KOL-017
Course type: Classroom course
Duration: 28 hours
Language: Norwegian
Price: Not set

The course is only available in Norwegian.

Etter å ha gjennomgått og bestått modulene 1.1 (8 timer) og 2.3 (16 timer), skal eleven gjennomføre modul 2.8 (20 timer) og 3.8 (8 timer). Dette skal gi førerne en god generell grunnopplæring i sikker bruk og praktisk forståelse for prinsippene for traverskraner.

 

Innhold

- Konstruksjon

- Oppbygging

- Betjening

- Bruksegenskaper

- Bruksområder

- Sikkerhetsutstyr

- Viktige kontrollpunkter

- Vedlikehold

 

Etter gjennomført kurs må deltageren gjennomføre 40 timer kjøretrening med kran, med fadder. Det avlegges da en praktisk kjøreprøve som vil gi grunnlag for utstedelse av kompetansebevis.

Hits per page
| 1 ... 8 |