Oil and Gas

Course catalogue

hits
129
Course code: MUK-019
Course type: E-learning course
Duration: 60 minutes
Language: English
Price: NOK 1000,-

Who is this course for?
Production operators.

Is previous experience required?
No previous experience is required to complete this course.

How will this course benefit me?
This course aims to provide appropriate knowledge of the techniques required for carrying out pressure testing and leak testing in the workplace.

How will this course benefit my company?
By ensuring you have appropriate knowledge of the techniques required for carrying out pressure testing and leak testing in the workplace.

What standards are referred to in this course?
This course does not refer to specific legislation or standards.

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.


Accreditation:

This course is approved by the Institution of Occupational Safety and Health (IOSH).

IOSH is the world’s Chartered body for safety and health professionals.

 

What that means:

We are the largest membership body for health and safety professionals.

We champion occupational safety and health causes and advocate for change.

We advise governments, NGOs and policymakers.

We facilitate safety and health awareness training in around 130 countries through IOSH Services Ltd, our wholly-owned trading arm.

We commission research and set national and international standards.

We shape the future of the profession.

Course code: MUK-074
Course type: E-learning course
Duration: 30 minutes
Language: English
Price: NOK 500,-

Who is this course for?

All personnel who work in the Oil & Gas industry in roles that are involved in oily discharges to sea.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

To provide learners with an awareness of the potential environmental impacts associated with oily discharges to sea, as well as the legislation and control measures that are in place to minimise these impacts.

How will this course benefit my company?

The course will benefit companies by ensuring that all relevant personnel are aware of ways to safely remove oily discharges which will help to take care of the environment.

What standards are referred to in this course?

• Offshore Petroleum Activities (Oil Pollution Prevention and Control) OPPC Regulations 2005

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: MUK-032
Course type: E-learning course
Duration: 20 minutes
Language: English
Price: NOK 500,-

Who is the course for?

All personnel who may be exposed to nitrogen in the workplace.

 

Is previous experience required?

No previous experience is required to complete this course. 

 

How will the course benefit me?

This course aims to provide learners with an awareness of nitrogen and provide best practice for work involving nitrogen in oil and gas producing facilities.

 

How will the course benefit my company?

The course will benefit companies by ensuring that all relevant personnel understand the best practice when working with nitrogen in oil and gas producing facilities.

 

What standards are referenced in the course?

Control of Substances Hazardous to Health (COSHH) Regulations 

Health and Safety Executive (Health and Safety Executive (HSE)

The Occupational Safety and Health Administration (OSHA)

 

Is there an assessment?

Yes

 

Accreditation:

This course is approved by the Institution of Occupational Safety and Health (IOSH).

IOSH is the world’s Chartered body for safety and health professionals.

 

What that means:

We are the largest membership body for health and safety professionals.

We champion occupational safety and health causes and advocate for change.

We advise governments, NGOs and policymakers.

We facilitate safety and health awareness training in around 130 countries through IOSH Services Ltd, our wholly-owned trading arm.

We commission research and set national and international standards.

We shape the future of the profession.

Course code: MUK-099
Course type: E-learning course
Duration: 45 minutes
Language: English
Price: NOK 500,-

Who is this course for?

This eLearning course is aimed at individuals required to work using display screen equipment, such as a computer, laptop or tablet.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

This course will give you a basic understanding of the key health risks associated with display screen equipment and what you can do to mitigate them.

How will this course benefit my company?

By ensuring you are fully aware of how to avoid injury while working at your computer, you can help reduce the number of lost workdays and hours due to health issues.

What standards are referred to in this course?

Health and Safety (Display Screen Equipment) Regulations

Is there an assessment?

Yes


Accreditation:

This course is approved by the Institution of Occupational Safety and Health (IOSH).

IOSH is the world’s Chartered body for safety and health professionals.


What that means:

We are the largest membership body for health and safety professionals.

We champion occupational safety and health causes and advocate for change.

We advise governments, NGOs and policymakers.

We facilitate safety and health awareness training in around 130 countries through IOSH Services Ltd, our wholly-owned trading arm.

We commission research and set national and international standards.

We shape the future of the profession.

 

Course code: MUK-072
Course type: E-learning course
Duration: 30 minutes
Language: English
Price: NOK 500,-

Who is this course for?

Personnel requiring an awareness and understanding of common practices and legislation for chemical use and discharges.

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

 

How will this course benefit me?

To provide learners with an awareness of the environmental impacts associated with the use and discharge of chemicals in the Oil and Gas Industry and the legislation and control measures that are in place to minimise the impact on the environment.

 

How will this course benefit my company?

By ensuring you are aware of the environmental  impacts associated with the use and discharge of chemicals in the Oil and Gas Industry and the legislation and control measures that are in place to minimise the impact on the environment.

 

What standards are referred to in this course?

Offshore Chemical Regulations 2002

Offshore Chemicals (Amendment) Regulations 2011

Offshore Petroleum (Oil Pollution Prevention and Control) Regulations

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: MUK-015
Course type: E-learning course
Duration: 30 minutes
Language: English
Price: NOK 500,-

Who is this course for?

All personnel within the Oil and Gas Industry.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

This course aims to increase learners’ awareness of the importance of Personal Protective Equipment (PPE), and outline the legal duties and responsibilities of employers and employees in relation to PPE.

How will this course benefit my company?

The course will benefit companies by reducing PPE related incidents and injuries. 

What standards are referred to in this course?

Control of Lead at Work Regulations 

Ionising Radiations Regulations 

Control of Asbestos at Work Regulations 

Control of Substances Hazardous to Health Regulations 

Control of Noise at Work Regulations

Personal Protective Equipment at Work Regulations

Is there an assessment?

Yes.


Accreditation:

This course is approved by the Institution of Occupational Safety and Health (IOSH). 

IOSH is the world’s Chartered body for safety and health professionals.

What that means:

We are the largest membership body for health and safety professionals.

We champion occupational safety and health causes and advocate for change.

We advise governments, NGOs and policymakers.

We facilitate safety and health awareness training in around 130 countries through IOSH Services Ltd, our wholly-owned trading arm.

We commission research and set national and international standards.

We shape the future of the profession.

Course code: MUK-011
Course type: E-learning course
Duration: 30 minutes
Language: English
Price: NOK 500,-

Who is the course for?

All personnel who work with machinery, tools and appliances.

 

Is previous experience required?

No previous experience is required to complete this course. 

 

How will the course benefit me?

This course aims to provide learners with an awareness of the requirements of the Provision and Use of Work Equipment Regulations (PUWER) and how they apply in the workplace.

 

How will the course benefit my company?

This course will benefit companies’ by providing personnel with an awareness of PUWER. 

 

What standards are referenced in the course?

Provision and Use of Work Equipment Regulations (PUWER)

Health and Safety at Work Act

Management of Health and Safety at Work Regulations

 

Is there an assessment?

Yes

 

Accreditation

This course is approved by the Institution of Occupational Safety and Health (IOSH).

IOSH is the world’s Chartered body for safety and health professionals.

 

What that means:

• We are the largest membership body for health and safety professionals.

• We champion occupational safety and health causes and advocate for change.

• We advise governments, NGOs and policymakers.

• We facilitate safety and health awareness training in around 130 countries through IOSH Services Ltd, our wholly-owned trading arm.

• We commission research and set national and international standards.

• We shape the future of the profession.

Course code: MUK-185
Course type: E-learning course
Duration: 30 minutes
Language: English
Price: NOK 500,-

Who is this course for?

Any personnel who require knowledge of Legionella bacteria.

 

Is previous experience required?

No previous experience is required to complete this course.

 

How will this course benefit me?

By providing personnel with an overview of the steps that can be taken to reduce the risks posed by Legionella in the workplace.

 

How will this course benefit my company?

By providing personnel with an overview of how to identify the risks associated with Legionella and the control measures that can be implemented to reduce those risks.

 

What standards are referred to in this course?

This course does not refer to specific legislation or standards.

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.


Accreditation:

This course is approved by the Institution of Occupational Safety and Health (IOSH).

IOSH is the world’s Chartered body for safety and health professionals.

 

What that means:

We are the largest membership body for health and safety professionals.

We champion occupational safety and health causes and advocate for change.

We advise governments, NGOs and policymakers.

We facilitate safety and health awareness training in around 130 countries through IOSH Services Ltd, our wholly-owned trading arm.

We commission research and set national and international standards.

We shape the future of the profession.

Course code: MUK-071
Course type: E-learning course
Duration: 45 minutes
Language: English
Price: NOK 500,-

Who is the course for?

Personnel working in industries which release pollutants into the air as a result of their operations.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

By providing you with an awareness of the environmental issues associated with atmospheric emissions and how these impacts can be minimised.

How will the course benefit my company?

Personnel who are aware of the impacts of environmental emissions and how they can be controlled can help to ensure compliance with regulations and reduce harm to the environment.

What standards are referenced in the course?

Climate Change Act

The International Convention for the Prevention of Pollution from Ships (MARPOL) Annex VI

Merchant Shipping (Prevention of Air Pollution from Ships) Regulations

Offshore Combustion Installations (Pollution Prevention and Control) Regulations (PPC Regulations)

Petroleum Act

Greenhouse Gas Emissions Trading Scheme

Ozone-depleting Substances Regulations

Fluorinated Greenhouse Gases Regulations

Energy Savings Opportunity Scheme (ESOS) Regulations

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: MUK-122
Course type: E-learning course
Duration: 15 minutes
Language: English
Price: NOK 500,-

Who is this course for?

Personnel requiring an awareness or understanding of common RPE and what they are used for.

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

 

How will this course benefit me?

This course aims to give personnel an introduction to different types of respiratory protection and describe its use in the workplace.

 

How will this course benefit my company?

By ensuring you have had an introduction to different types of respiratory protection and describe its use in the workplace.

 

What standards are referred to in this course?

Health and Safety at Work etc. Act 1974

Management of Health and Safteey at Work Regulations 1999

Control of Substances Hazardous to Health Regulations (COSHH) 2002

Control of Asbestos Regualtions 2012

Control of Lead at Work Regulations 2002

Ionising Radiations Regulations 1999

Confined Space Regulations 1997

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: MUK-014
Course type: E-learning course
Duration: 120 minutes
Language: English
Price: NOK 1200,-

Who is this course for?
This course is aimed at all personnel involved in mechanical isolations.

Is previous experience required?
No previous experience is required to complete this course.

How will this course benefit me?
This course aims to provide all relevant personnel with an overview of best practices in mechanical isolations.

How will this course benefit my company?
The course will benefit companies by ensuring that all relevant personnel have an understanding of mechanical isolation best practices, which will reduce accidents and injuries at work.

What standards are referred to in this course?
No standards or regulations are referenced in this course.

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: MUK-186
Course type: E-learning course
Duration: 45 minutes
Language: English
Price: NOK 500,-

Who is this course for?

Personnel responsible for cooking, preparing or handing food and others working in the kitchen/galley/dining areas.

 

Is previous experience required?

No previous experience is required to complete this course.

 

How will this course benefit me?

This course will provide you with an introduction to industry best practice in relation to food safety, health and hygiene.

 

How will this course benefit my company?

This course will provide personnel with an introduction to industry best practice in relation food safety, health and hygiene and help reinforce the importance of good food safety practices in the workplace.

 

What standards are referred to in this course?

This course does not refer to specific legislation or standards.

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: MUK-121
Course type: E-learning course
Duration: 1 hour 30 minutes
Language: English
Price: NOK 1000,-

Who is this course for?

Personnel throughout an organisation which operates within major accident hazard sectors.

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

 

How will this course benefit me?

This course aims to provide learners with an introduction to major accident hazards.

 

How will this course benefit my company?

By ensuring you have had an introduction to major accident hazards.

 

What standards are referred to in this course?

The Offshore Installations (Safety Case) Regulations

The Offshore Installation and Pipeline Works (Management and Administration) Regulations (MAR)

The Offshore Installations (Prevention of Fire andf Explosion and Emergency Response) Regulations (PFEER)

The Offshore Installations and Wells (Design and Contruction) Regulations (DCR)

The Control of Major Accident Hazards Regulations (COMAH)

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: MUK-034
Course type: E-learning course
Duration: 30 minutes
Language: English
Price: NOK 500,-

Course Goal: This course aims to provide an introduction to corrosion in the Oil and Gas Industry

 

Target Audience: All relevant personnel

 

Learning Objectives

 

LO1 Define what is meant by corrosion and explain why it poses a risk to the Oil and Gas Industry

LO2 Identify areas where corrosion is commonly found in oil and gas facilities

LO3 Identify the elements which are necessary for corrosion to occur

LO4 Identify the main corrodents found in oil and gas facilities and explain how these can cause corrosion

LO5 Identify different types of corrosion

LO6 Explain how corrosion can impact wells and flowlines

LO7 Explain how corrosion can impact plant and pipelines

LO8 Explain how corrosion can impact gas systems

LO9 Explain how corrosion can impact water systems

LO10 Explain how corrosion can impact deadleg areas

LO11 Identify areas where external corrosion is most prevalent

LO12 Describe corrosion control measures

LO13 Explain how to play your part in minimising corrosion

Course code: MUK-020
Course type: E-learning course
Duration: 90 minutes
Language: English
Price: NOK 1000,-

Who is this course for?

All personnel working with electricity in the Oil and Gas Industry.

 

Is previous experience required?

No previous experience is required to complete this course.

 

How will this course benefit me?

This course aims to provide all relevant personnel with a broad overview of common Electrical Safety Rules, and outlines best practice when working with electricity.

 

How will this course benefit my company?

By ensuring you have the knowledge of common Electrical Safety Rules, and the best practice when working with electricity, to reduce risk and injury at work.

 

What standards are referred to in this course?

• Health and Safety at Work Act

• Electricity at Work Regulations

• Management of Health and Safety at Work Regulations

• Electricity at Work Safe Working Practices

• Offshore Electricity and Noise Regulations

• Provision and Use of Work Equipment Regulations

• BS 7671: 2018 Requirements for Electrical Installations

• Offshore Installations (Safety Case) Regulations

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: MUK-018
Course type: E-learning course
Duration: 30 minutes
Language: English
Price: NOK 500,-

Who is this course for?

This course is aimed towards all personnel who use abrasive wheels in the workplace.


Is previous experience required?

No previous experience is required to complete this course.


How will this course benefit me?

This course aims to provide all relevant personnel with the knowledge required to understand the hazards and controls associated with the use of abrasive wheels.


How will this course benefit my company?

The course will benefit companies by providing personnel with knowledge of how to avoid risks and hazards when using abrasive wheels, subsequently reducing accidents and injuries in the workplace.


What standards are referred to in this course? 

• Provision and Use of Work Equipment Regulations (PUWER) 


Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: MUK-168
Course type: E-learning course
Duration: 2 hours
Language: English
Price: NOK 1500,-

Who is this course for?

This eLearning course is aimed at individuals who are required to work with wells in the oil and gas industry.

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role.

 

How will this course benefit me?

This course aims to provide learners with an overview of well integrity and its importance in maintaining safe and secure operations.

 

This course contains the following sections:

Section 1: Well Integrity Overview

Section 2: Well Categorisation and Well Barriers

Section 3: Well Design and the Cementing Process

Section 4: Human Factors in Well Integrity

 

How will this course benefit my company?

To ensure you have an overview of well integrity and its importance in maintaining safe and secure operations.

 

What standards are referred to in this course?

This course is made according to industry best practice.

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: MUK-134
Course type: E-learning course
Duration: 15 minutes
Language: English
Price: NOK 500,-

Who is this course for?

Personnel who work with pressurised cylinders, compressed gas or associated equipment.

 

Is previous experience required?

No previous experience is required to complete this course.

 

How will this course benefit me?

This course aims to provide an overview of the use of pressurised cylinders, the risks involved and storage requirements.

 

How will this course benefit my company?

By ensuring you have an overview of the use of pressurised cylinders, the risks involved and storage requirements.

 

What standards are referred to in this course?

This course does not refer to specific legislation or standards.

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.


Accreditation:

This course is approved by the Institution of Occupational Safety and Health (IOSH).

IOSH is the world’s Chartered body for safety and health professionals.

 

What that means:

We are the largest membership body for health and safety professionals.

We champion occupational safety and health causes and advocate for change.

We advise governments, NGOs and policymakers.

We facilitate safety and health awareness training in around 130 countries through IOSH Services Ltd, our wholly-owned trading arm.

We commission research and set national and international standards.

We shape the future of the profession.

Course code: MUK-179
Course type: E-learning course
Duration: 30 minutes
Language: English
Price: NOK 500,-

Who is this course for?

Supervisors and employees who require an overview of Behavioural Observation Safety Systems.

 

Is previous experience required?

No previous experience is required to complete this course.

 

How will this course benefit me?

This course will provide you with an introduction to behavioural observation safety systems.

 

How will this course benefit my company?

Behavioural observation safety systems aim to improve workplace safety by focussing on what personnel do, and why they do it, and then applying strategies that promote safe behaviours in the future.

 

What standards are referred to in this course?

This course does not refer to specific legislation or standards.

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: MUK-008
Course type: E-learning course
Duration: 45 minutes
Language: English
Price: NOK 500,-

Who is the course for?

All personnel who are at risk from slips, trips and falls.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

This course aims to increase learners’ awareness of the risks, and consequences, of slips, trips and falls in the workplace and the control measures and steps that can be taken to reduce the risk of slips, trips and falls, based on industry best practice.

How will the course benefit my company?

This course will benefit companies’ by reducing slip, trip and fall injuries among personnel.

What standards are referenced in the course?

Health and Safety at Work Act

Management of Health and Safety at Work Regulations

Workplace (Health, Safety and Welfare) Regulations

Health and Safety Executive (HSE)

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.


Accreditation:

This course is approved by the Institution of Occupational Safety and Health (IOSH).

IOSH is the world’s Chartered body for safety and health professionals.

 

What that means:

We are the largest membership body for health and safety professionals.

We champion occupational safety and health causes and advocate for change.

We advise governments, NGOs and policymakers.

We facilitate safety and health awareness training in around 130 countries through IOSH Services Ltd, our wholly-owned trading arm.

We commission research and set national and international standards.

We shape the future of the profession.

 

Hits per page