Oil and Gas

Course catalogue

hits
11
Course code: EXT-004
Course type: E-learning course
Duration: 5 hours
Language: English, Norwegian
Price: NOK 6000,-

This course is made for personnel who organize or perform: planning, installation, inspection and maintenance of Ex equipment.

The course gives an introduction and repetition in different subjects treated in the IEC 60079 Standard (NEK EN 60079).

The course duration is 5 hours and is valid for 5 years

The course can also be taken as a refresher course for Ex maintenance


Themes:

• Fundamental Ex philosophy, refresher

• Preparing and installing electrical equipment in hazardous areas

• Inspection and maintenance of electrical equipment in Ex areas

• Understand what maintenance tasks can be done locally, and what must be performed by an authorized workshop

• Give candidates for CompEx certification a solid background for the theoretical assessment

Course code: EXT-003
Course type: E-learning course
Duration: 8 hours
Language: English
Price: NOK 4200,-

This course provides the candidate with a general understanding of the principles of explosion theory, and what measures we put in place to ensure safety. In this course we explain why gases are divided into classes, areas into zones and show you how equipment is designed and marked for use in specific conditions. All to ensure safety and reduce the potential for explosions in gaseous atmospheres.

Content:

- Fire and explosion theory
- Main organizations and regulations for Ex
- Area classification and Ex zoning
- General principles for type of protection and marking
- Applicable standards for Ex
- Proper design and positioning of Ex equipment
- Exd protection
- Exe protection
- Exp protection
- Exo, Exq and Exm protection
- Exn and Exs protection
- Exi protection
- Ex protection in real-life situations


Norwegian EX Basic course can be found by searching for the course code EXT-024.

Course code: EXT-005
Course type: E-learning course
Duration: 5-hour e-learning
Language: English, Norwegian
Price: NOK 6200,-

The course gives you a basic understanding of the principles of intrinsically safe loops (IS) in potentially explosive areas.

After completing the course, the candidate will have acquired the necessary knowledge about the design of intrinsically safe (IS), choice of equipment, inspection and maintenance in potentially explosive areas.

Our aim is to ensure that the employees are motivated to work safely and securely.

The course lasts 5 hours and the course certificate is valid for 5 years

The e-learning course can also be used as a refresher after 5 years


Themes:

• Understand the general principles for the type of specific protection and correct marking of components approved in intrinsically safe systems (IS)

• Current standard for Exi

• Construction and assessment of intrinsically safe equipment

• Assessment and concrete use of “simple apparatus app”

• Be able to choose and install the correct Exi equipment in hazardous areas according to the standards IEC 60079-14 and 60079-25

• How to work safely with IS

• Competence requirements for performing work on Exi installations

• How to verify and calculate an Exi circuit

 

• Know where to find and how to read relevant standards, data sheets, product sheets and other relevant literature

Course code: EXT-007
Course type: Blended course
Duration: 5 hours + 1 day cla ...
Language: Norwegian
Price: From NOK 11200,-

This course combines self-study by e-learning and classroom training with demonstrations and examples which is useful when working in explosive atmospheres.

This course is made for personnel involved in selection, erection, inspection and maintenance of equipment for potentially explosive atmospheres.

The courses give an introduction and repetition in different subjects treated in the relevant IEC 60079 Standards (NEK EN 60079).

Course code: EXT-006
Course type: Blended course
Duration: 8-hour e-learning + ...
Language: English, Norwegian
Price: From NOK 11200,-

This course combines self-study by e-learning and classroom training with demonstrations and examples which is useful when working in explosive atmospheres.

The course is suitable for personnel who should have an introduction in potentially explosive areas, marking, equipment, and requirements.

Participants will be introduced to the relevant parts of the NEK 420, IEC 60079 standard (NEK EN 60079-standards) as well as national adaptations where relevant.

Course code: EXT-008
Course type: Blended course
Duration: 5-hour e-learning + ...
Language: Norwegian
Price: From NOK 11200,-

 

This course combines self-study by e-learning and classroom training with demonstrations and examples which is useful when working in explosive atmospheres.

The concept intrinsic safety is unlike the other Ex protection concepts as it is a system concept. Therefore, it is necessary to understand the system as a whole, how the environment and individual components affect the system to maintain the integrity of the intrinsically safe system.

Course code: EXT-011
Course type: Classroom course
Duration: 1 day
Language: Norwegian
Price: From NOK 6000,-

This is a course for electrical installations in potentially explosive areas.

Our goal is to make sure that employees are motivated to work safely and securely.

 

Topics:

• Understand the general principles of type of specific protection and correct labeling of components approved in intrinsically safe facility (IS)

• Current Exi Standard

• Could choose to install the correct Exi equipment in hazardous areas accordance with IEC 60079-14 standards and 60079-25

• How to work safely with IS

• Requirements for competence to perform work on Exi installations

• How to verify and calculate an Exi circuit

 

Standards:

• NEK EN 60079-11

• NEK EN 60079-14

• NEK EN 60079-25

• IEC 60079-11

• IEC 60079-14

• IEC 60079-25

 

This course is only available in Norwegian.

Course code: EXT-012
Course type: Classroom course
Duration: 2 days
Language: Norwegian
Price: From NOK 11200,-

This course is made for personell envolved in design, planning, projecting, installation and maintenance on electrical installations and equipment offshore. 

The purpose of the standard is to minimize the hazards to people and equipment, whilst optimizing dependability.

Objective: The purpose of the standard is to minimize the hazards to people and equipment, whilst optimizing dependability.


Content:

- An easy to understand overview and explanation of the committees/regulations/standards and how they are intertwined. 

- Presentation of the regulations and norms: PTIL 5 HMS, Nek 410 (IEC 60092), Nek 420 (IEC 60079), ATEX directives including standards and the Norsok series. 

- The structure and history of the IEC 61892 series, and the scope and application. 

- By using a fictive, illustrated installation, we will focus on the practical elements covered in the following standards: 

o IEC 61892-1 - General requirements and conditions 

o IEC 61892-2 - System Design 

o IEC 61892-3 – Equipment 

o IEC 61892-4 – Cables 

o IEC 61892-6 – Installation 

 

o IEC 61892-7 – Hazardous areas

 

This course is only available in Norwegian.

Course code: EXT-009
Course type: Classroom course
Duration: 1 day
Language: Norwegian
Price: From NOK 6000,-

This is a course for electrical installations in potentially explosive areas.

Our goal is to make sure that employees are motivated to work safely and securely.   


Topics:

• General principles for explosion protection

• Area classification and zone division

• Gas groups and the connection between area and equipment

• Temperature classes and the connection between area and equipment

• The general principles for type of protection and labeling

 

Standards:

• NEK 420

• IEC / NEK EN 60079-10-1

• IEC / NEK EN 60079-14

 

This course is only available in Norwegian.

Course code: EXT-13
Course type: Classroom course
Duration: Not set
Language: Not set
Price: From NOK 21400,-
Course code: EXT-010
Course type: Classroom course
Duration: 1 day
Language: Norwegian
Price: From NOK 6000,-

This is a course for electrical installations in potentially explosive areas.

Objective: Our goal is to make sure that employees are motivated to work safely and securely.

 

Topics:

• General principles of explosion protection 

• Site classification and zone section 

• Gas groups and the connection between site and equipment 

• Temperature classes and the connection between the site and equipment 

• General principles for the type of protection and tagging 

• Inspection and maintenance in explosive environment 

• How maintenance work is carried out in explosive environment

• What the participant can do itself, and what needs to be submitted to the authorized repair shop

 

Standards:

• NEK 420

• IEC / NEK EN 60079-10-1

• IEC / NEK EN 60079-14


This course is only available in Norwegian.

Hits per page