Oil and Gas

Course catalogue

hits
654
Course code: VTK-001
Course type: E-learning course
Duration: 45 minutes
Language: English
Price: NOK 950,-

This course provides an introduction to the understanding of gas in high risk work situations.  It describes real dangers and explains about the most common types of gas.  The course provides increased understanding and knowledge of elements of risk when working in areas exposed to gas, and knowledge of how best to protect yourself, and others, using proper equipment. Users shall become acquainted with the possibilities and limitations presented by gas measurement equipment, in relevant situations.

 

Course Content

- Introduction

- Relevant terms

- Air and closed spaces

- Oxygen measurement

- Explosive gases

- Toxic gases

- Conclusion

Course code: MUK-001
Course type: E-learning course
Duration: 45 minutes
Language: French (Subtitles)
Price: NOK 500,-

Ce cours est destiné à vous présenter les bonnes pratiques de l'industrie concernant le travail avec accès à des espaces confinés.

 

Lorsque ce cours sera terminé, vous devriez pouvoir :

• Expliquer les exigences dictées par les bonnes pratiques de l'industrie relatives au travail impliquant l'accès à des espaces confinés.

Course code: MUK-037
Course type: E-learning course
Duration: 1 hour 30 minutes
Language: English
Price: NOK 1000,-

Course Goal: This course aims to provide learners with an introduction to the principles of the systems associated with oil and gas processing operations. 

Course code: MUK-127
Course type: E-learning course
Duration: 15 minutes
Language: English
Price: NOK 500,-

Who is this course for?

All relevant personnel

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

 

How will this course benefit me?

This course aims to provide an overview of the hazards associated with the use of portable hand tools and the measures that should be in place to control the risk of injury

 

How will this course benefit my company?

By ensuring you have an overview of the hazards associated with the use of portable hand tools and the measures that should be in place to control the risk of injury

 

What standards are referred to in this course?

Provision and Use of Work Equipment Regulations 1998 (PUWER)

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: MUK-203
Course type: E-learning course
Duration: 30 minutes
Language: English (US)
Price: NOK 500,-

Who is this course for?

Personnel requiring an awareness or understanding of US ladder safety.

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

 

How will this course benefit me?

This course aims to ensure that relevant personnel in the US have a common and consistent understanding of ladder safety.

 

How will this course benefit my company?

By ensuring you have a common and consistent approach to company and industry best practice in relation to US ladder safety.

 

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: MUK-181
Course type: E-learning course
Duration: 35 minutes
Language: English
Price: NOK 500,-

Who is this course for?

All personnel.

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role.

 

How will this course benefit me?

This course aims to provide learners with the knowledge of how to assess when it is safe to tackle a fire, information on different types of extinguisher, and an overview of how to operate a fire extinguisher safely.

 

How will this course benefit my company?

To ensure you have the knowledge of how to assess when it is safe to tackle a fire, information on different types of extinguisher, and an overview of how to operate a fire extinguisher safely.

 

What standards are referred to in this course?

The course is made according to industry best practice.

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: MTP-072
Course type: E-learning course
Duration: 15 minutes
Language: English (US)
Price: NOK 500,-

Who is this course for?

All relevant personnel.

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

 

How will this course benefit me?

This course aims to provide an overview of an employees right to implement their 'Stop Work Authority'. This course in Stop Work Authority is divided into and covers the following topics: Imminent danger, stop work procedure, right to refuse work and unsafe conditions.

 

How will this course benefit my company?

By ensuring you are aware of an employees right to omplement their 'Stop Work Authority'.

 

What standards are referred to in this course?

N/A

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 100%.

Course code: SAA-35
Course type: E-learning course
Duration: 30 minutes
Language: English
Price: GBP 50,-

Who is the course for?
This eLearning course is aimed at individuals who are required to travel overseas on business, particularly to high-risk locations where there is a threat of criminal activity, civil unrest and terrorism.

Is previous experience required?
There is no requirement for prior knowledge or experience before completing this course and it is assumed that you are competent in your designated role.

How will the course benefit me?
When you travel somewhere new, your lack of local knowledge can mean that you may be more likely to be targeted by criminals. This course will give you a basic understanding of the threats commonly faced by travellers and explain how you can reduce the likelihood of a health or security incident.

The knowledge gained in this course will help you to assess your personal risk so that you can stay safe while travelling. It will also outline the basic principles of safety and security.

How will the course benefit my company?
By ensuring you are fully aware of the risks that you may face when travelling, you can keep yourself, and your company's assets and information, safe.

What standards are referenced in the course?
This course does not contain reference to specific legislation or standards but is written to current travel security guidelines and industry best practice.

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 100%.

Course code: MUK-142
Course type: E-learning course
Duration: 15 minutes
Language: English
Price: NOK 500,-

Who is this course for?

Personnel requiring an awareness or understanding of flare systems.

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

 

How will this course benefit me?

This course provides an overview of flare systems.

 

How will this course benefit my company?

By ensuring you have an overview of flare systems.

 

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: MUK-224
Course type: E-learning course
Duration: 45 minutes
Language: English
Price: NOK 500,-

Course goal:

This course aims to provide learners with an understanding of US best practice in relation to working with asbestos.

This course aims to provide learners with an understanding of the hazards associated with exposure to asbestos. It will also identify where asbestos may be found, how it can potentially affect your heath, and what you need to do to protect yourself from exposure. 

  

Learning Objectives: 

LO1 Explain what asbestos is

LO2 Describe the various types, properties and uses of asbestos 

LO3 Describe the hazards of asbestos

LO4 Identify the regulatory protective measures that should be implemented when working with asbestos

LO5 Give an overview of the health impacts of asbestos exposure

LO6 Identify areas where asbestos may still be found and describe how to identify its presence

LO7 Explain what should be considered when planning work and undertaking a risk assessment

LO8 Describe the typical procedures to deal with an emergency involving the uncontrolled release of dust containing asbestos fibers

 

Course code: MUK-003
Course type: E-learning course
Duration: 45 minutes
Language: French (subtitles)
Price: NOK 500,-

Ce cours devrait vous permettre de :

• Acquérir une meilleure compréhension des dangers associés au sulfure d'hydrogène et des mesures de détection et de protection nécessaires à mettre en place et à respecter

• Identifier les niveaux et limites légaux d'exposition professionnelle qui ont été mis en place pour votre protection

• Expliquer les responsabilités des employeurs concernant la gestion des risques associés à une exposition potentielle au sulfure d'hydrogène sur le lieu de travail

• Expliquer les devoirs des employés quant à l'observation des procedures pertinentes relatives au sulfure d'hydrogène et au suivi des recommandations fournies par les employeurs ou les propriétaires d'installation.

Course code: MUK-141
Course type: E-learning course
Duration: 15 minutes
Language: English
Price: NOK 500,-

Who is this course for?
Newcomers to the Oil and Gas Industry

Is previous experience required?
You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

How will this course benefit me?
This course aims to provide a brief overview of fire and safety systems

How will this course benefit my company?
By ensuring you have a brief overview of fire and safety systems.

What standards are referred to in this course?
Health and Safety at Work Act
The Management of Health and Safety at Work Regulations
The Regulatory Reform (Fire Safety) Order
The Fire (Scotland) Act

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: MUK-176
Course type: E-learning course
Duration: 45 minutes
Language: English
Price: NOK 500,-

Who is this course for?

Personnel involved in UK oil and gas operations.

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

 

How will this course benefit me?

This course aims to highlight best practice in relation to environmental compliance and toidentify the environmental regulatory regime that oversees offshore installations and oil and gas operations within the UK Continental Shelf (UKCS).

 

How will this course benefit my company?

By ensuring you have been introduced to best practice in relation to environmental compliance and toidentify the environmental regulatory regime that oversees offshore installations and oil and gas operations within the UK Continental Shelf (UKCS).

 

What standards are referred to in this course?

 ISO 14001

Environmental Impact Assessment (EIA) Regulations

Habitat and Conservation Regulations

European Union Habitat Directive

Environmental Statement

Environmental Policy

European Union Offshore Safety Directive

OSPAR Convention

The Offshore Petroleum Production and Pipelines (Assessment of Environmental Effects) Regulations

The Offshore Petroleum Activities (Conservation of Habitats) Regulations

The Offshore Marine Conservation Regulations

The Offshore Combustion Installations (Prevention and Control of Pollution) Regulations

The Offshore Installations (Emergency Pollution Control) Regulations

The Offshore Chemical Regulations

The Greenhouse Gas Emissions Trading Scheme Regulations

The Offshore Petroleum Activities (Oil Pollution Prevention and Control) (OPPC) Regulations

The REACH Enforcement Regulations

The Fluorinated Greenhouse Gases Regulations

Integrated Pollution Prevention and Control (IPPC) Directive) 

Control of Major Accident Hazards (COMAH) Regulations

Merchant Shipping (Prevention of Pollution by Sewage and Garbage from Ships) Regulations

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: MUK-216
Course type: E-learning course
Duration: 30 minutes
Language: English (US)
Price: NOK 500,-

Course Goal: 

This course aims to provide an awareness of US best practice in relation to working with Naturally Occurring Radioactive Material (NORM).

 

Learning Objectives:

LO1 Define what is meant by NORM and where it is found

LO2 Explain what is meant by ‘radioactive material’ and the difference between alpha particles, beta particles and gamma rays

LO3 Describe the hazards associated with NORM

LO4 Identify the pathways for exposure to NORM

LO5 Identify the radiation protection principles

LO6 Explain the importance of radiation monitoring

LO7 Identify control measures that can be used to minimize the risk posed by NORM

LO8 Describe the PPE that should be used when working with NORM

LO9 Explain how to limit decontamination and correctly dispose of NORM

Course code: MUK-137
Course type: E-learning course
Duration: 45 minutes
Language: French (Subtitles)
Price: NOK 500,-

À l'issue de ce cours, vous devriez pouvoir :

• Identifier les principaux problèmes environnementaux 

• Expliquer l'importance pour une entreprise d'être écoresponsable 

• Expliquer le rôle des systèmes de gestion environnementale et de la norme ISO 14001 en matière de gestion de l'environnement 

• Expliquer le rôle de l'autorité de réglementation 

• Définir les termes « aspect » et « impact » dans le contexte écologique 

• Identifier les impacts sur l'environnement des rejets de forage, des émissions atmosphériques, des eaux produites et autres rejets provenant du pétrole, des déversements, des rejets de produits chimiques, des déchets, du bruit et des perturbations des fonds marins 

• Décrire les manières de limiter l'impact sur l'environnement, et

• Expliquer que tout le monde a un rôle à jouer dans la protection de l'environnement et savoir de quelle manière remplir ce rôle

Course code: MUK-145
Course type: E-learning course
Duration: 45 minutes
Language: English
Price: NOK 1000,-

Who is this course for?

Personnel requiring awareness or understanding of upstream oil and gas operations.

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

 

How will this course benefit me?

This course aims to provide learners with an overview of upstream oil and gas operations.

 

How will this course benefit my company?

By ensuring you have an overview of the process of upstream oil and gas operations.

 

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: MUK-204
Course type: E-learning course
Duration: 30 minutes
Language: English (US)
Price: NOK 500,-

Who is this course for?

Personnel requiring an awareness or understanding of US scaffolding safety.

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

 

How will this course benefit me?

This course aims to ensure that relevant personnel in the US have a common and consistent understanding of scaffolding safety.

 

How will this course benefit my company?

By ensuring you have a common and consistent approach to company and industry best practice in relation to US scaffolding safety.

 

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: MUK-159
Course type: E-learning course
Duration: 45 minutes
Language: English
Price: NOK 500,-

Who is this course for?

This course is suitable for all personnel to assist in first aid.

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

 

How will this course benefit me?

This course is designed to enable personnel to treat a casualty who is injured at work, or suffers from a serious illness, while waiting for qualified medical assistance to arrive.

 

How will this course benefit my company?

By ensuring you enable personnel to treat a casualty who is injured at work, or suffers from a serious illness, while waiting for qualified medical assistance to arrive.

 

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: BVS-003
Course type: E-learning course
Duration: 2 hours
Language: English
Price: EUR 280,-

Presentation 

This training course aims at providing a general description of the different types of lifting appliances that may be found on board ships and offshore units, their main characteristics and operating principles. It provides an introduction to the applicable rules and regulations related to lifting appliances. 

Objectives

On completion of the training, students will be able to: 

Get familiar with the various types of lifting appliances installed on board ships and offshore units. 

Know the regulations, which are relevant for inspection and certification of cargo gear, including international regulations and BV Rules. 

Understand the particularities of lifting appliances and the relevant requirements for the survey of materials and equipment.

Understand the scope of intervention for Cargo Gear in various stages – design, manufacturing and operation, including an overview of control and safety design requirements.

Program

Types of lifting appliances

Definitions

Derrick systems

Cranes

Typical crane types

Applicable Rules and Regulations

International Regulations and National Requirements

Bureau Veritas Rules, additional class notations and recognized standards

Bureau Veritas services

Cargo Gear Register Book

Design, Inspection, testing and surveys at works

Design acceptance criteria

Documents to be submitted

Inspection and testing

Steel wire ropes and fibre ropes

Loose gear

Winches

Survey of fitting on board

Overall tests prior to putting into service: Mandatory tests, overload test, testing at

Manufacturer’s test bench, inspections after testing

Marking

In-service surveys

Periodicity, scope and documentation

Guidelines for a thorough annual examination

Items to be tested: slew bearing, loose gear examination, ropes, hydraulic system

Control and safety devices

Thickness measurements, wear limits and criteria for replacement

Certificate

On completion of the training program, the student will be awarded: 

A Certificate of Cargo Gear and Lifting Appliances, issued by Bureau Veritas Solutions Marine & Offshore.

The Certificate of Cargo Gear and Lifting Appliances is obtained after completion of the course and passing the online test. 

Course code: BIL-001
Course type: E-learning course
Duration: 1 hour
Language: Norwegian
Price: NOK 800,-

This course will give you an introduction to the use of EPOXY and about procedures that ensure a safe work environment. The aim of the course is for you to be able to contribute to that your work place will continue to be a safe place to work, without injuries and accidents.

The course contains the following subjects:
-    Introduction to Epoxy products
-    Relevant health risks associated with Epoxy produkts
-    Precautions by using Epoxy products
-    Danger symptoms
-    Final test

Hits per page
| 1 ... 9 ... |