Oil and Gas

Course catalogue

hits
654
Course code: MUK-006-FT
Course type: E-learning course
Duration: N/A
Language: English
Price: NOK 500,-

FAST TRACK is a learning method which provides you with bespoke learning content by identifying any knowledge gaps you may have in a particular subject area.

FAST TRACK is a pre-assessment learning tool which is designed to assess your existing knowledge of a particular subject area. The pre-assessment uses a pool of questions to test your current knowledge. The results of this assessment help identify your personal knowledge gaps. FAST TRACK then automatically creates a bespoke course to address these knowledge gaps.


Course goal: To increase learners’ awareness of the importance of safe manual handling operations and the risks involved with manual handling. The course also aims to outline best practice for the correct handling techniques for safe lifting, and for the pushing and pulling of loads.

This course covers the following learning objectives:

LO1 Define the term ‘manual handling’ and explain the importance of safe manual handling operations

LO2 Identify the types of injuries that may result from manual handling operations

LO3 Identify the legislation that is in place to regulate manual handling operations

LO4 Describe the duties that are placed on employers and employees by the Manual Handling Operations Regulations

LO5 Explain the importance of risk assessing manual handling operations

LO6 Identify the factors to consider when assessing manual handling operations and identify ways of reducing the risks of injury

LO7 Describe good handling techniques for safe lifting and the importance of working within the HSE manual handling risk assessment guidelines

LO8 Describe good handling techniques for pushing and pulling loads

LO9 Explain the training requirements associated with manual handling operations

Course code: MTP-073
Course type: E-learning course
Duration: 30 Minutes
Language: English (US)
Price: NOK 500,-

This course aims to provide learners with an awareness of US best practice in relation to the values that govern responsible corporate practice and personal behaviors in the workplace.

The Code of Conduct course provides an overview of the common values that govern responsible corporate practice and personal behaviour in a company. The course will identify the responsibilities of employees and our common responsibilities toward each other in the workplace. You will learn about applicable laws on human rights, equality, discrimination and corruption. During the course, you will be asked to make your own decisions in relevant dilemmas involving sexual harassment, bullying, discrimination and corruption.

Course code: MUK-021
Course type: E-learning course
Duration: 30 minutes
Language: French (Subtitles)
Price: NOK 500,-

À l'issue de ce cours, vous devriez pouvoir :

• Expliquer l'importance de l'identification des dangers

• Donner des exemples de dangers industriels courants

• Identifier les dangers inhérents au lieu de travail, et

• Comprendre l'importance des mesures de contrôle dans la limitation des risques provenant de dangers

Course code: MUK-064
Course type: E-learning course
Duration: 30 minutes
Language: English
Price: NOK 500,-

Who is this course for?

Personnel who require awareness and understanding of the hazards and controls of common compressed air uses.

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

 

How will this course benefit me?

This course aims to encourage the safe use of compressed air and describes the ways in which compressed air can be dangerous as well as how to minimise the risks of such dangers occurring

 

How will this course benefit my company?

By ensuring you are introducted  to safe use of compressed air and describes the ways in which compressed air can be dangerous as well as how to minimise the risks of such dangers occurring

 

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: MTP-065
Course type: E-learning course
Duration: 2 hours
Language: English, Norwegian
Price: NOK 700,-

Who is this course for?

Everyone working on high voltage installations.

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role.

 

How will this course benefit me?

The course meets the requirements set in § 7 of the ""Safety Regulations for Work and Operation of Electrical Equipment and Installations- FSE"", that relevant personnel shall be given annual training and instruction in FSE. The course also provides the necessary training and instruction in first aid, focusing on electrical injuries, with the exception of the mandatory practical training in cardio-pulmonary resuscitation (CPR).

The regulations of various authorities make FSE applicable to all those working with electricity, whether on board ship, on platforms or on land. This course is suitable for all, regardless of which industry you work in. 

The authorities require that training in FSE and first aid in the event of electrical accidents is undertaken at least once a year. No more than 12 months shall elapse between training courses.

 

How will this course benefit my company?

By ensuring you have the knowledge and competence to be working on  high voltage installations.

 

What standards are referred to in this course?

 § 7 of the ""Safety Regulations for Work and Operation of Electrical Equipment and Installations- FSE""

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: EXT-004
Course type: E-learning course
Duration: 5 hours
Language: English, Norwegian
Price: NOK 6000,-

This course is made for personnel who organize or perform: planning, installation, inspection and maintenance of Ex equipment.

The course gives an introduction and repetition in different subjects treated in the IEC 60079 Standard (NEK EN 60079).

The course duration is 5 hours and is valid for 5 years

The course can also be taken as a refresher course for Ex maintenance


Themes:

• Fundamental Ex philosophy, refresher

• Preparing and installing electrical equipment in hazardous areas

• Inspection and maintenance of electrical equipment in Ex areas

• Understand what maintenance tasks can be done locally, and what must be performed by an authorized workshop

• Give candidates for CompEx certification a solid background for the theoretical assessment

Course code: GAS-002
Course type: Blended course
Duration: 3 Days
Language: English / Norwegian
Price: From NOK 9900,-

IGF Advanced Webinar

Lectures will be presented remotely. Participants need a PC/tablet with camera, mic, speaker, pen and paper for the lectures. After enrolment, participant will receive a personal information about the course and code for "log in" to Mintra TrainingPortal. Compendiums for use in the course can be downloaded from TrainingPortal. A personal code for joining the webinar will be sent by Mail.                            

Mandatory requirements for personal COP IGF Advanced:

After fulfilling the lectures (Remotely), participants will need sailing experience (PA) on an IGF vessel and documentation of 3 bunkering’s. They will need to collect the sailing experience after they have recived their IGF Basic certificate. See more info at our homepage: www.gassteknikk.com / IGF COP or NMA's hompage: https://sdir.no 

Course code: IN-08
Course type: E-learning course
Duration: 30 minutes
Language: English
Price: GBP 40,-

Who is the course for?

This course is for any person who interacts with, or is responsible for, the specification, design, operation and maintenance of assets that employ safety instrumented systems.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

This course will provide you with an awareness of the purpose and nature of safety systems deployed to protect people, the environment and plant in the areas that you work.

How will the course benefit my company?

By ensuring personnel have an understanding of safety instrumented systems.

What standards are referenced in the course?

IEC 61508

IEC 61511

IEC 62061

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: PRO-016
Course type: E-learning course
Duration: 4-6 hours
Language: Norwegian
Price: NOK 1900,-

COURSE DESCRIPTION

In a risk assessment,  potential events and consequences are considered. In this course, we focus on unwanted events such as failures and accidents. This could be, for example, a gas leak or afire at an oil platform, that equipment stops working during an operation in a hospital, or that an accident occurs during the execution of a work task. The risk analysis process consists of three phases:

1) Planning

2) Risk assessment

3) Risk management

This course shows how these phases can be planned and implemented in practice. There are many guidelines and standards on how a risk assessmentcan be carried out, and many are adapted to particular industries and professional areas. This course presents a general approach that can be used in most industries.

 

 

COURSE CONTENT

•Introduction:What is risk? What is the purpose of a risk assessments?

•Risk assessment and risk management:Description of the steps in a risk assessment, what is important to look out for in the various steps, and how the risk assessment can be applied in risk management.

•Risk analysis methods:There are numerous risk assessment methods that are suitable for looking at different issues. An introduction is given to some of these; Hazid/ course risk analysis, SJA, HAZOP, FMEA and QRA. It’s crucial to choose a method that is well adapted to the problem you are looking at.

 

 

STANDARDS REFERRED TO IN THIS COURSE

- ISO 31000:2018 Risk Management

 

 

HOW WILL THIS COURSE BENEFIT ME, AND MY COMPANY? 

After completing the course, participants should be able to understand what a risk assessment is and have knowledge of the relevant steps. Participants will also have basic knowledge of:

•Different risk analysis methods.

•Choice of risk analysis methods within the three main categories; simplified risk assessment, standard risk assessment and model-based risk assessment. 

•Typical pitfalls for planning and carrying out risk assessments.

•Understanding how risk assessments can contribute to decision support.

 

 

For more information and prices: 

http://www.hseacademy.com

learning@proactima.com

Phone: + 47 4000 1933

Course code: MUK-111
Course type: E-learning course
Duration: 30 minutes
Language: English
Price: NOK 500,-

Who is this course for?

Personnel requiring an awareness or understanding of the role of Banksmen and Slingers.

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

 

How will this course benefit me?

This course aims to give an overview of the roles of the Banksman and Slinger

 

How will this course benefit my company?

To ensure you have an overview of the roles of the Banksman and Slinger

 

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: MUK-010
Course type: E-learning course
Duration: 35 minutes
Language: French (Subtitles)
Price: NOK 500,-

À l'issue de ce cours, vous devriez pouvoir :

• Identifier les risques inhérents à un travail en hauteur et expliquer l'importance de la planification et de la gestion des risques

• Identifier les exigences législatives et réglementaires qui aident au contrôle des travaux en hauteur

• Décrire les principales méthodes d'accès pour travailler en hauteur et les différents types d'équipement pour le travail en hauteur 

• Décrire la hiérarchie de contrôle pour la gestion et la sélection de l'équipement lié au travail en hauteur

• Expliquer comment utiliser  correctement un harnais de sécurité, et

• Décrire les règles pour travailler avec des échelles et des échafaudages ainsi que l'importance de l'inspection de l'équipement

Course code: MUK-086
Course type: E-learning course
Duration: 3 hours
Language: English
Price: NOK 1500,-

Who is this course for?

All relevant personnel.

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role.

 

How will this course benefit me?

This course aims to provide an introduction to Gas Compression.

 

The course has seven modules:

Module 1: Introduction to Gas Compression

Module 2: Gas Compression Systems

Module 3: Gas Compressors and their Principles

Module 4: Gas Compressors and their Components

Module 5: Gas Compression Systems: Controlling Surge

Module 6: Gas Compression Systems: Start-up and Shutdown

Module 7: Gas Compression Systems: Innovation

 

How will this course benefit my company?

To ensure you have had an introduction to Gas Compression.

 

What standards are referred to in this course?

The course is made according to industry best practice.

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.This course has seven modules:

Course code: MUK-068
Course type: E-learning course
Duration: 20 minutes
Language: English
Price: NOK 500,-

Who is this course for?

For all personnel who are involved in working with gas turbines.

 

Is previous experience required?

No previous experience is required to complete this course.

 

How will this course benefit me?

This course aims to provide an introduction to gas turbines and how they are designed and operated.

 

How will this course benefit my company?

The course will benefit companies by ensuring that all relevant personnel have an understanding of gas turbines and how they are designed and operated.

 

What standards are referred to in this course?

No standards or regulations are referenced in this course.

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: ITB-003
Course type: Blended course
Duration: 12 Months
Language: English
Price: From GBP 665,-

The aim of this training programme is to impart the initial training to enable trainee competence assessors, now referred to as learners, to acquire the necessary knowledge and skills which underpin the tasks to be performed as a Competence Assessor.

The objectives of this training are that learners will be able to:

(a) Understand the principals and corresponding roles and responsibilities involved in competence assessment

(b) Plan and carry out an assessment

(c) Monitor and verify assessment records

(d) Objectively review and assess different types of evidence

(e) Understand the importance of robust record keeping

(f) Deliver assessment feedback

The OPITO Competence Assessor Award delivered through Blended Learning requires the following:

Computer/Laptop

Webcam

Printer/scanner

The Blended Learning is delivered in Stages. Access to the e-learning modules are in My Training tab in the Training portal. Stage 1 & 2 are found in the OPITO Competence Assessor Award e-learning module 1. 

Stage 1 - Online registration 1 hour to complete

Stage 2- E-learning modules Self-study 5/6 hours recommended

Stage 3- Live instructor webinar and online test 1 full day (sessions run twice weekly)

Stage 4- Upon successful completion of the training, and with evidence that the skills and knowledge have been successfully applied in the workplace, the learner would be eligible to conduct workplace assessments, providing they themselves are technically competent in the discipline being assessed. Following this training, it will be the responsibility of the employing organisation to allow each assessor to gain further experience. 


Course code: APP-001
Course type: E-learning course
Duration: 7 hours
Language: English
Price: NOK 4200,-

This course looks at electrical installations in explosive atmospheres. The object of the course is to enable those working in explosive atmospheres to perform their work properly and safely.

 

This course fulfils the requirements for personnel working in explosive atmospheres. Theory is taken from CENELEC and IEC norms.

 

Text, images, videos, animations and 3D simulations will help give you a better understanding of explosive atmospheres and their particular characteristics.

Course code: MUK-060
Course type: E-learning course
Duration: 30 minutes
Language: English
Price: NOK 500,-

Who is this course for?
Trainee Oil and Gas Operations Technicians / Deck Crew

Is previous experience required?
You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

How will this course benefit me?
This course aims to provide an introduction to the use of storage tanks

How will this course benefit my company?
By ensuring you are introducted to the use of storage tanks

What standards are referred to in this course?
N/A

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: MUK-006
Course type: E-learning course
Duration: 30 minutes
Language: French (Subtitles)
Price: NOK 500,-

Ce cours vise à vous permettre de :

• Définir le terme « manutention manuelle » et expliquer l'importance de la sécurisation des opérations de manutention manuelle 

• Identifier les types de blessures susceptibles de se produire par suite d’opérations de manutention manuelle 

• Identifier la législation mise en place pour réguler les opérations de manutention manuelle

• Décrire les responsabilités attribuées aux employeurs et aux employés par la législation sur les opérations de manutention manuelle

• Expliquer l'importance de l'évaluation des risques liés aux opérations de manutention manuelle 

• Identifier les facteurs à prendre en compte quand on évalue des opérations de manutention manuelle et identifier les manières de réduire les risques de blessure 

• Décrire les bonnes techniques de manutention pour un levage, une poussée et une traction des charges sûrs, et

• Expliquer les exigences en matière de formation associées aux opérations de manutention manuelle

Course code: EXT-003
Course type: E-learning course
Duration: 8 hours
Language: English
Price: NOK 4200,-

This course provides the candidate with a general understanding of the principles of explosion theory, and what measures we put in place to ensure safety. In this course we explain why gases are divided into classes, areas into zones and show you how equipment is designed and marked for use in specific conditions. All to ensure safety and reduce the potential for explosions in gaseous atmospheres.

Content:

- Fire and explosion theory
- Main organizations and regulations for Ex
- Area classification and Ex zoning
- General principles for type of protection and marking
- Applicable standards for Ex
- Proper design and positioning of Ex equipment
- Exd protection
- Exe protection
- Exp protection
- Exo, Exq and Exm protection
- Exn and Exs protection
- Exi protection
- Ex protection in real-life situations


Norwegian EX Basic course can be found by searching for the course code EXT-024.

Course code: MUK-073
Course type: E-learning course
Duration: 45 minutes
Language: French (Subtitles)
Price: NOK 500,-

À l'issue de ce cours, vous devriez pouvoir:

•  Expliquer l'importance de la prévention des déversements

•  Identifier les sources de déversements potentielles

•  Décrire les impacts environnementaux potentiels associés aux déversements

•  Décrire les contrôles réglementaires associés à la prévention et à l'intervention en cas de déversement

•  Expliquer l'objectif des plans d'urgence en cas de pollution par hydrocarbures (PUPH)

•  Identifier les actions à prendre et les exigences en matière de signalement en cas de déversement, et

•  Décrire les actions quotidiennes que tout le personnel peut prendre pour empêcher des déversements mineurs

Course code: MTP-080
Course type: E-learning course
Duration: 60 minutes
Language: English
Price: NOK 600,-

Who is the course for?

Personnel who require knowledge or awareness of dangerous goods within HEMS operations.

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

 

How will the course benefit me?

This course is part of the required trainings for HEMS operating crew, and covers classification of dangerous goods, how dangerous goods is divided into hazard classes, how it should be marked and labelled and what emergency procedures should contain.

 

This course must be repeated every 24 months.

 

How will the course benefit my company?

By ensuring you are familiar with the classification of dangerous goods, how dangerous goods is divided into hazard classes, how it should be marked and labelled and what emergency procedures should contain.

 

What standards are referenced in the course?

• International Civil Aviation Organization (ICAO)

• International Air Transport Association (IATA)

Hits per page
| 1 ... 8 ... |