Oil and Gas

Course catalogue

hits
654
Course code: NI-022
Course type: E-learning course
Duration: 30 minutes
Language: Norwegian / english
Price: NOK 400,-

The course covers the following topics:

- How to handle substance abuse
- Drug policies
- AKAN

At the beginning of the course you can take a pre-test, where you get the opportunity to show your skills. If you pass the pre-test, you do not have to go through the entire course.

Course code: MUK-136
Course type: E-learning course
Duration: 15 Minutes
Language: English
Price: NOK 500,-

Who is this course for?

All personnel working with electricity in the Oil and Gas Industry

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

 

How will this course benefit me?

This course aims to provide all relevant personnel with an overview of the safety precautions to be taken when working on electrical equipment

 

How will this course benefit my company?

By ensuring you have an overview of the safety precautions to be taken when working on electrical equipment

 

What standards are referred to in this course?

Health and Safety at Work Act (1974)

Electricity at Work Regulations (1989)

Management of Health and Safety at Work Regulations (1999)

Electricity at Work Safe Working Practices (2003)

Offshore Electricity and Noise Regulations (1997) 

Provision and Use of Work Equipment Regulations (1998)

BS 7671: 2008 Requirements for Electrical Installations

Offshore Installations (Safety Case) Regulations 2005 

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%

Course code: MUK-193
Course type: E-learning course
Duration: 70 minutes
Language: English
Price: GBP 80,-

Course Goal: This course aims to provide an introduction to the decommissioning process and an overview of the regulations governing decommissioning on the United Kingdom Continental Shelf (UKCS).

 

Who is the course for?

All relevant personnel

 

Is there an assessment? 

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

 

Learning Objectives:

LO1 Give an overview of the history of oil and gas production on the United Kingdom Continental Shelf (UKCS)

LO2 Explain why decommissioning activity is increasing on the UKCS

LO3 Describe what is meant by ‘decommissioning’

LO4 Explain the scope of decommissioning on the UKCS

LO5 Provide an overview of relevant decommissioning legislation and regulations

LO6 Explain the impact of the Brent Spar incident on decommissioning regulation

LO7 Provide an overview of the OSPAR Decision 98/3

LO8 Identify the different phases of the decommissioning lifecycle

LO9 Provide a basic overview of well plugging and abandonment 

LO10 Provide an overview of the different methods of decommissioning

LO11 Provide examples of decommissioning projects on the UKCS

LO12 Give examples of the types of hazards which may be encountered during decommissioning

Course code: NOG-GSK
Course type: Blended course
Duration: 5 days
Language: Norwegian
Price: From NOK 14500,-

The object of this course is to motivate participants to actively contribute to a better and safer working environment. The course emphasises preventative measures that can prevent harm to people, the environment and equipment.

 

Course Content

After completing the course the students should have acquired basic knowledge of and proficiency in:

- HSE culture

- Prevention of work accidents

- Use of relevant fire fighting and rescue equipment

- Lifesaving first aid

- Collective evacuation aids

- Correct use of rescue suits with breathing apparatus

- Helicopter evacuation (HUET)

 

The course aims to create positive attitudes to the term HSE culture and an understanding of the importance of the social and physical working environment to life, health and values, both at work and during leisure time.

 

The course is valid for 48 months.

Course code: IKM-004
Course type: Classroom course
Duration: 1 day
Language: Norwegian
Price: From NOK 3500,-

Hensikten med kurset er å repeter grunnleggende kunnskaper og ferdighet, til utførende ansvarlig person som skal demontere, montere og for spenne bolter i henhold til NS EN 1591-4 kapittel 8

Praktisk informasjon:
Re sertifiseringen er basert på 1 dag og består av klasseromsundervisning og praktiske oppgaver
Kurset avsluttes med en teoretisk og praktisk eksamen med sensor.
Etter man har bestått teoretisk og praktisk eksamen er man sertifisert for nye 5 år men følgende punkter må i varetas for at det skal vare ut 5 års perioden:
- Sertifisert personell skal ikke ha hatt avbrudd i arbeid med bolte arbeid for en periode på over seks måneder.
- Ved utførelse av arbeid på boltede forbindelser, skal det ikke foreligge noen grunn til å stille spørsmål om den faglige kompetansen til sertifisert personell.

Hvis disse vilkårene ikke oppfylles, skal sertifiseringen trekkes tilbake.
 
Kursinnhold:
Kurset tar for seg følgende tabeller i EN1591-4:2013:
1, 2, 3, 6, 7, 8 og 9.

 

Course code: MUK-210-FT
Course type: E-learning course
Duration: 35 minutes
Language: English (US)
Price: NOK 500,-

Course Goal: 

This course provides learners with an awareness of US best practice in relation to working at height and fall protection.

 

Learning Objectives:

 

LO1 Identify when fall protection is required

LO2 Identify the legislative and regulatory requirements for fall protection that help to control work at height

LO3 Explain the duties that are placed on employers and employees

LO4 Describe the hazards involved in working at height

LO5 Explain the importance of planning and risk assessment

LO6 Describe the hierarchy of control for managing and selecting fall protection equipment 

LO7 Identify the factors that should be considered when assessing fall protection methods

LO8 Describe the main methods of access for working at height and give examples of the different types of fall protection equipment

LO9 Describe the rules for working with ladders

LO10 Describe the rules for working with scaffolds

LO11 Explain the importance of inspecting equipment

LO12 Explain how to correctly use a safety harness

Course code: MUK-088
Course type: E-learning course
Duration: 3 hours
Language: English
Price: NOK 1500,-

Who is this course for?

All relevant personnel

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

 

How will this course benefit me?

This course aims to provide an overview of Oil and Gas metering, Sampling and Pigging

This course contains seven modules:

Module 1: Introduction to Metering

Module 2: Gas Metering Principles of Flow Measurement

Module 3: Gas Metering

Module 4: Oil Metering

Module 5: Metering Operations

Module 6: Sampling Systems

Module 7: Pigging

 

How will this course benefit my company?

To ensure you have an overview of Oil and Gas metering, Sampling and Pigging

 

What standards are referred to in this course?

The course is made according to industry best practice. 

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: MUK-223
Course type: E-learning course
Duration: 45 minutes
Language: English (US)
Price: NOK 500,-

Who is this course for?

All personnel involved in forklift activities.

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

 

How will this course benefit me?

This course aims to provide an overview of the hazards specific to forklift activities. 

 

How will this course benefit my company?

By ensuring you have an overview of the hazards specific to forklift activities. 

 

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: MUK-218
Course type: E-learning course
Duration: 30 minutes
Language: English (US)
Price: NOK 500,-

Course Goal:

This course aims to  provide learners with an overview of US best practice in relation to working with hand and power tools.

This course aims to provide an understanding of the potential hazards associated with the use of hand tools and power tools, as well as the safety precautions required to prevent those hazards from occurring.

 

Learning Objectives:

LO1 Identify the general hazards and control measures associated with hand and power tools

LO2 Identify specific hazards associated with hand tools

LO3 Give an overview of general power tool safety precautions

LO4 Explain how guards provide protection to operators

LO5 Give examples of tools that must be equipped with a momentary switch

LO6 Identify specific hazards and control measures related to the use of electric tools

LO7 Identify the proper procedures to follow when using a grinder

LO8 Identify specific hazards and control measures related to the use of pneumatic tools

LO9 Identify specific hazards and control measures related to the use of powder-actuated tools

LO10 Identify specific hazards and control measures related to the use of hydraulic jacks

 

Course code: MUK-252
Course type: E-learning course
Duration: 20 minutes
Language: English
Price: NOK 250,-

Who is this course for?
All personnel.

Is previous experience required?
You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

How will this course benefit me?
This course aims to provide personnel with a guide on the preventative and protective measures that may be put in place at workplaces following personnel return

How will this course benefit my company?
By ensuring you have an overview of the preventative and protective measures that may be put in place at workplaces following personnel return

What standards are referred to in this course?
N/A

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: MUK-003
Course type: E-learning course
Duration: 45 minutes
Language: English (Latin America ...
Price: NOK 500,-

Este curso está diseñado para brindarle al personal costa afuera un conocimiento general sobre los peligros y medidas de control que se relacionan con las áreas de trabajo de la instalación en las que puede estar presente el H2S.

• Comprender mejor los peligros que se relacionan con el H2S y las medidas necesarias de detección y protección que deben tenerse y cumplirse

• Identificar los niveles y límites de exposición laboral legales que se han establecido para su protección.

• Explicar las responsabilidades de los empleadores en lo que respecta a la gestión de riesgos asociados a la posible exposición al H2S en el lugar de trabajo.

• Explicar las tareas de los empleados respecto de cumplir con los procedimientos pertinentes sobre H2S y seguir las pautas que proporcionan los empleadores o propietarios de las instalaciones.

Course code: TS-003
Course type: Classroom course
Duration: 2 days
Language: Norwegian
Price: From NOK 9250,-

The course is only available in Norwegian

 

Kurset gir kjennskap til forskrifter, regelverk og retningslinjer for arbeids- og entringstillatelser i områder med brann- og helsefarlige produkt. I tillegg gis kjennskap til virkemåter og begrensninger for sensorer som måler brennbare gasser, oksygen og helsefarlige gasser, samt kunnskap om metoder for gassfriing og rengjøring av anlegg.

 

Rettet mot alle som arbeider i prosesser/områder hvor det kan oppstå eksplosjonsfarlige atmosfærer. 

 

Etter kurset skal deltakerne:

- kjenne forskrifter, regelverk og retningslinjer for arbeids- og entringstillatelser i områder med brann- og helsefarlige produkt

- virkemåter og begrensninger for sensorer som måler brennbare gasser, oksygen og helsefarlige gasser

- kunne metoder for gassfriing og rengjøring av anlegg

 

Innhold
- Regelverk for godkjenning av gasskontrollør
- Betjening av bærbare gassmåleinstrument til bruk ved gassmålinger for HC og O2
- Kontroll og vedlikeholdsrutiner for instrumentene
- Brann- og eksplosjonsteori
- Måleskalaen %LEL
- Sensorenes virkemåte
- Normer for forurensning i atmosfæren
- Risikofylt og ikke risikofylt entring
- Fremgangsmåte ved inertisering ved bruk av N2; samt lufting for sikker entring
- Relevante prosedyrer og instrukser
- Varsling og kommunikasjon samt praktisk bruk av radio
- Handlingsmønster ved uønskede hendelser og stans av arbeidet
- Teoretiske og praktiske gruppeoppgaver (tester gjøres i vårt prosessanlegg i vår 10” container)
Course code: TOS-005
Course type: Classroom course
Duration: 2 hours 30 minutes
Language: Norwegian
Price: From NOK 1100,-

FSE first aid is a practical course, with a high number of skill training stations. FSE first aid module will Increase knowledge of life-saving first aid.

The course covers the followong subjects: The first assessment, burns and electrical burns, recovery position, the unconsciousness patient, CPR skill training.

Course code: LSI-001
Course type: E-learning course
Duration: 1 hour
Language: English
Price: NOK 650,-

The goal of this course is that all personnel who use hazardous work equipment, will gain good knowledge of HSE when using work equipment. The course deals with personnel requirements, roles and responsibilities, as well as accidents and regulations on safety.

 

In addition, the course requires that practical training is conducted on applicable work equipment.

 

The course covers the following topics:

 

• Work equipment in general

• Use of work equipment

• Selection of work equipment

• Training in the use of work equipment

• Workspaces and personnel requirements

• Risk assessment

• Safety, accidents and liability

• Direct and underlying causes of accidents

• Relevant laws and regulations

 

The course includes exercises, and final test with 30 questions.

Course code: MUK-116
Course type: E-learning course
Duration: 15 minutes
Language: English
Price: NOK 500,-

Who is this course for?

Personnel requiring an awareness or understanding of common handling and storage methods for chemicals.

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

 

How will this course benefit me?

This course aims to provide an overview of the requirements for the handling and storage of hazardous substances

 

How will this course benefit my company?

By ensuring you have an overview of the requirements for the handling and storage of hazardous substances

 

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%. 

Course code: PRO-002
Course type: E-learning course
Duration: 3-5 hours
Language: Norwegian
Price: NOK 1900,-

We investigate to learn, to implement preventive measures and prevent recurrence of adverse events. Investigating an incident is like peeling an onion. We start with the direct causes which are the most visible. To get to the bottom of the events we must uncover "layer upon layer" which others causes lay behind. The technological development, and new forms of organizations, increase the complexity and it becomes more difficult to understand the connection between the incident and the underlying causes. This course presents method, organization and process for the implementation of investigations. The course can also be offered in combination with a classroom session.

COURSE CONTENT

- Description and classification of events

- Organization of an investigation

- Collection and securing of information

- The cause of loss model

- MTO model

- STEP model

- Reporting and follow-up


HOW WILL THIS COURSE BENEFIT ME AND MY COMPANY?

After completing the course, participants should understand what investigation is and know the various steps in an investigation process. Participants will also receive knowledge of how investigations are conducted and implemented in practice.

 

Course provider: Proactima

Course code: MUK-208
Course type: E-learning course
Duration: 20 minutes
Language: English (US)
Price: NOK 500,-

Who is this course for?

Personnel requiring an awareness or understanding of US respiritory protection and RPE.

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

 

How will this course benefit me?

This course aims to ensure that relevant personnel in the US have a common and consistent understanding of RPE.

 

How will this course benefit my company?

By ensuring you have a common and consistent approach to company and industry best practice in relation to US RPE.

 

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: MUK-171
Course type: E-learning course
Duration: 30 minutes
Language: English
Price: NOK 500,-

Who is this course for?

Oil and Gas Operations Technicians.

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role.

 

How will this course benefit me?

This course aims to provide an overview of wireline equipment and its operation.

 

How will this course benefit my company?

To ensure you have an overview of wireline equipment and its operation.

 

What standards are referred to in this course?

The course is made according to industry best practice.

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: MUK-178
Course type: E-learning course
Duration: 30 minutes
Language: English
Price: NOK 500,-

Who is this course for?

Personnel who work with pumps in the Oil & Gas industry.

 

Is previous experience required?

No previous experience is required to complete this course.

 

How will this course benefit me?

This course aims to provide an overview of the various types of pumps used in the Oil and Gas Industry.

 

How will this course benefit my company?

The course will benefit companies by ensuring that all personnel who work with pumps have an overview of each type and how they work.

 

What standards are referred to in this course?

No standards or regulations are referenced in this course.

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: MUK-183
Course type: E-learning course
Duration: 30 minutes
Language: English
Price: NOK 500,-

Course Goal: This course aims toprovide learners with an overview of industry best practice associated with pressure vessel inspection

 

Learning Objectives:

LO1 Define what is meant by a ‘pressure vessel’

LO2 Give examples of pressure vessels

LO3 Identify the factors that can cause pressure vessel incidents

LO4 Identify the hazards posed by pressure vessel failure

LO5 Explain the requirements for inspections to be carried out by a competent person

LO6 Explain the requirements for a written scheme of examination

LO7 Describe how to carry out internal and external pressure vessel inspection

LO8 Describe how to carry out pressure pipework inspection

LO9 Explain the importance of carrying out regular pressure testing

LO10 Describe the control measures that are required to limit the risk posed by pressure vessels

Hits per page
| 1 ... 10 ... |