Oil and Gas

Course catalogue

hits
10
Course code: GAS-001
Course type: Blended course
Duration: 8 hours
Language: English
Price: From USD 580,-

This course aims to enhance the capabilities of shipboard personnel who sail on ships using LFF (low flashpoint fuel) as propulsion energy. It focuses on the responsibilities of all personnel serving on these kinds of ships. The course is developed in accordance with IMO model course 7:13.

1st January 2017 the IGF Code was made mandatory and STCW now includes new minimum requirements for the training and qualifications of personnel on ships subject to the IGF Code. This training program has been approved by the Norwegian Maritime Authority. The training consists of an e-learning course, practical assessment at a facility center and a classroom exam. When the training is completed a course diploma is issued. 

The practical training takes place at facilities located in various parts of Norway and abroad. Please choose the most convenient training for yourself or your employees. It is possible for our instructors to perform the practical assessment on the premises of a client. Should this be of interest please contact us on: post@gassteknikk.no

Course code: GAS-002
Course type: Blended course
Duration: 3 Days
Language: English / Norwegian
Price: From NOK 9900,-

IGF Advanced Webinar

Lectures will be presented remotely. Participants need a PC/tablet with camera, mic, speaker, pen and paper for the lectures. After enrolment, participant will receive a personal information about the course and code for "log in" to Mintra TrainingPortal. Compendiums for use in the course can be downloaded from TrainingPortal. A personal code for joining the webinar will be sent by Mail.                            

Mandatory requirements for personal COP IGF Advanced:

After fulfilling the lectures (Remotely), participants will need sailing experience (PA) on an IGF vessel and documentation of 3 bunkering’s. They will need to collect the sailing experience after they have recived their IGF Basic certificate. See more info at our homepage: www.gassteknikk.com / IGF COP or NMA's hompage: https://sdir.no 

Course code: ITB-003
Course type: Blended course
Duration: 12 Months
Language: English
Price: From GBP 665,-

The aim of this training programme is to impart the initial training to enable trainee competence assessors, now referred to as learners, to acquire the necessary knowledge and skills which underpin the tasks to be performed as a Competence Assessor.

The objectives of this training are that learners will be able to:

(a) Understand the principals and corresponding roles and responsibilities involved in competence assessment

(b) Plan and carry out an assessment

(c) Monitor and verify assessment records

(d) Objectively review and assess different types of evidence

(e) Understand the importance of robust record keeping

(f) Deliver assessment feedback

The OPITO Competence Assessor Award delivered through Blended Learning requires the following:

Computer/Laptop

Webcam

Printer/scanner

The Blended Learning is delivered in Stages. Access to the e-learning modules are in My Training tab in the Training portal. Stage 1 & 2 are found in the OPITO Competence Assessor Award e-learning module 1. 

Stage 1 - Online registration 1 hour to complete

Stage 2- E-learning modules Self-study 5/6 hours recommended

Stage 3- Live instructor webinar and online test 1 full day (sessions run twice weekly)

Stage 4- Upon successful completion of the training, and with evidence that the skills and knowledge have been successfully applied in the workplace, the learner would be eligible to conduct workplace assessments, providing they themselves are technically competent in the discipline being assessed. Following this training, it will be the responsibility of the employing organisation to allow each assessor to gain further experience. 


Course code: NOG-GSK
Course type: Blended course
Duration: 5 days
Language: Norwegian
Price: From NOK 14500,-

The object of this course is to motivate participants to actively contribute to a better and safer working environment. The course emphasises preventative measures that can prevent harm to people, the environment and equipment.

 

Course Content

After completing the course the students should have acquired basic knowledge of and proficiency in:

- HSE culture

- Prevention of work accidents

- Use of relevant fire fighting and rescue equipment

- Lifesaving first aid

- Collective evacuation aids

- Correct use of rescue suits with breathing apparatus

- Helicopter evacuation (HUET)

 

The course aims to create positive attitudes to the term HSE culture and an understanding of the importance of the social and physical working environment to life, health and values, both at work and during leisure time.

 

The course is valid for 48 months.

Course code: ITB-004
Course type: Blended course
Duration: 12 Months
Language: English
Price: From GBP 465,-

The OPITO Internal Verifier Award delivered through Blended Learning requires the following:

Computer/Laptop

Webcam

Printer/scanner

The Blended learning is delivered in Stages:

Stage 1 Online registration 1 hour to complete

Stage 2 Self study of the workbook provided

Stage 3 A live webinar 1 day of 6 hours. (sessions run once per week)

The following units will be discussed and practical exercises completed on the live webinar following a 1 hour Exam:

1. Introduction to Internal Verification

1.1 The Purpose of Internal Verification

2. The Internal Verifier’s Role

2.1 Supporting Assessors

2.2 Monitoring and Verifying the Quality of Assessments

2.3 Record Keeping and Feedback

2.4 Assuring the Competence Process

Delegates attending this Internal Verifier Blended Learning training programme will be given a series of explanations and demonstrations that will identify what they are expected to know and do. This will be followed by practical exercises allowing delegates to rehearse their skills, knowledge and understanding of the Internal Verifier role. All practical exercises conducted on the live webinar shall use, wherever possible, the actual paperwork that the delegates are expected to use in their workplace.

Stage 4- Workplace verifications to be completed within 12 months of training to become a fully qualifed OPITO Internal verifier 

OPITO Internal Verifier Award Standard 

Course code: ITB-001
Course type: Blended course
Duration: 70 days - 3 years
Language: English
Price: From GBP 540,-

E-learning course material to self-study the L&D9DI requirements to meet SQA for:

1. Preparing and planning assessments 

2. Assessing candidate’s performance and knowledge 

3. Confirming candidate progression and achievement 

4. Documenting each of the above according to the requirement of the management system in the workplace 

5. How to build a portfolio of evidence that meets the L&D9DI standard 

6. How to demonstrate knowledge of the above processes and a range of knowledge related to competence assessment in the workplace

 

What’s included in this course:

• SQA Registration Fee

• Online Induction

• Access to all L&D9DI e-learning modules

• Full explanation of evidence requirements and access to templates and evidence guides and examples 

• Full access to Mintra ITB TrainingPortal

• Virtual classroom on request - Introduction to SQA running weekly 

• Comprehensive support from an ITB Assessor to completion

• Assessment and Internal Verification of your submitted evidence

• SQA Certification Successful delegates will receive a certificate from the Scottish Qualifications Authority (SQA)

 

Virtual webinar sessions running weekly with an ITB Trainer for a Q&A session. Join as many virtual sessions as needed to support to completion of the full SQA qualification. 

 

Those who assess in the workplace using direct and indirect methods of assessment using examples: observation, questioning, work product, professional discussions, simulations, written evidence such as witness statements and candidate statements and RPL.

Assessment Requirements

Delegates will be required to submit a portfolio of evidence covering all of the Performance and Knowledge Criteria for the L&D9DI Unit. They must submit, as a minimum, assessment-related documentation that provides evidence for the elements listed below, for two candidates, covering two assessments per candidate: 

• Preparing to assess 

• Planning assessments 

• Assessing candidate’s performance and knowledge 

• Confirming progression and achievement

Delegates must use a range of assessment methods, including observation, questioning and work product. 

Delegates will also need to be observed carrying out part of the assessment process by an ITB (or NVQ-level) assessor and participate, with other assessors in their workplace, in standardisation practice.

 

Course code: ITB-002
Course type: Blended course
Duration: 70 days - 3 years
Language: English
Price: From GBP 460,-

This option is more aimed at delegates with prior knowledge/experience in the workplace assessment, who are looking to consolidate their skills and knowledge to gain a formal certificate.

The e-learning material includes:

How to build a portfolio of evidence that meets the L&D9DI standard 

How to demonstrate knowledge of the above processes and a range of knowledge related to competence assessment in the workplace

What’s included in this course:

• SQA Registration Fee

• Online Induction

• Access to L&D9DI evidence requirements e-modules 

• Full explanation of evidence requirements and access to templates and evidence guides and examples 

• Virtual classroom on request - Introduction to SQA running weekly 

• Comprehensive support from an ITB Assessor to completion

• Assessment and Internal Verification of your submitted evidence

• SQA Certification Successful delegates will receive a certificate from the Scottish Qualifications Authority (SQA)

Virtual webinar sessions running weekly with an ITB Trainer for a Q&A session. Join as many virtual sessions as needed to support to completion of the full SQA qualification. 

Those who assess in the workplace using direct and indirect methods of assessment using examples: observation, questioning, work product, professional discussions, simulations, written evidence such as witness statements and candidate statements and RPL.

 

Assessment Requirements

Delegates will be required to submit a portfolio of evidence covering all of the Performance and Knowledge Criteria for the L&D9DI Unit. They must submit, as a minimum, assessment-related documentation that provides evidence for the elements listed below, for two candidates, covering two assessments per candidate: 

• Preparing to assess 

• Planning assessments 

• Assessing candidate’s performance and knowledge 

• Confirming progression and achievement

Delegates must use a range of assessment methods, including observation, questioning and work product. 

 

Delegates will also need to be observed carrying out part of the assessment process by an ITB (or NVQ-level) assessor and participate, with other assessors in their workplace, in standardisation practice.

Course code: EXT-007
Course type: Blended course
Duration: 5 hours + 1 day cla ...
Language: Norwegian
Price: From NOK 11200,-

This course combines self-study by e-learning and classroom training with demonstrations and examples which is useful when working in explosive atmospheres.

This course is made for personnel involved in selection, erection, inspection and maintenance of equipment for potentially explosive atmospheres.

The courses give an introduction and repetition in different subjects treated in the relevant IEC 60079 Standards (NEK EN 60079).

Course code: EXT-006
Course type: Blended course
Duration: 8-hour e-learning + ...
Language: English, Norwegian
Price: From NOK 11200,-

This course combines self-study by e-learning and classroom training with demonstrations and examples which is useful when working in explosive atmospheres.

The course is suitable for personnel who should have an introduction in potentially explosive areas, marking, equipment, and requirements.

Participants will be introduced to the relevant parts of the NEK 420, IEC 60079 standard (NEK EN 60079-standards) as well as national adaptations where relevant.

Course code: EXT-008
Course type: Blended course
Duration: 5-hour e-learning + ...
Language: Norwegian
Price: From NOK 11200,-

 

This course combines self-study by e-learning and classroom training with demonstrations and examples which is useful when working in explosive atmospheres.

The concept intrinsic safety is unlike the other Ex protection concepts as it is a system concept. Therefore, it is necessary to understand the system as a whole, how the environment and individual components affect the system to maintain the integrity of the intrinsically safe system.

Hits per page