Oil and Gas

Course catalogue

hits
129
Course code: MUK-167
Course type: E-learning course
Duration: 1 hour 30 minutes
Language: English
Price: NOK 1000,-

Who is this course for?

Personnel requiring an awareness or understanding of drilling technology.

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

 

How will this course benefit me?

This course aims to provide learners with an introduction to the Oil and Gas Industry and the different stages required for extracting and producing hydrocarbons.

 

How will this course benefit my company?

By ensuring you have an introduction to the Oil and Gas Industry and the different stages required for extracting and producing hydrocarbons.

 

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: MUK-006-FT
Course type: E-learning course
Duration: N/A
Language: English
Price: NOK 500,-

FAST TRACK is a learning method which provides you with bespoke learning content by identifying any knowledge gaps you may have in a particular subject area.

FAST TRACK is a pre-assessment learning tool which is designed to assess your existing knowledge of a particular subject area. The pre-assessment uses a pool of questions to test your current knowledge. The results of this assessment help identify your personal knowledge gaps. FAST TRACK then automatically creates a bespoke course to address these knowledge gaps.


Course goal: To increase learners’ awareness of the importance of safe manual handling operations and the risks involved with manual handling. The course also aims to outline best practice for the correct handling techniques for safe lifting, and for the pushing and pulling of loads.

This course covers the following learning objectives:

LO1 Define the term ‘manual handling’ and explain the importance of safe manual handling operations

LO2 Identify the types of injuries that may result from manual handling operations

LO3 Identify the legislation that is in place to regulate manual handling operations

LO4 Describe the duties that are placed on employers and employees by the Manual Handling Operations Regulations

LO5 Explain the importance of risk assessing manual handling operations

LO6 Identify the factors to consider when assessing manual handling operations and identify ways of reducing the risks of injury

LO7 Describe good handling techniques for safe lifting and the importance of working within the HSE manual handling risk assessment guidelines

LO8 Describe good handling techniques for pushing and pulling loads

LO9 Explain the training requirements associated with manual handling operations

Course code: MUK-064
Course type: E-learning course
Duration: 30 minutes
Language: English
Price: NOK 500,-

Who is this course for?

Personnel who require awareness and understanding of the hazards and controls of common compressed air uses.

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

 

How will this course benefit me?

This course aims to encourage the safe use of compressed air and describes the ways in which compressed air can be dangerous as well as how to minimise the risks of such dangers occurring

 

How will this course benefit my company?

By ensuring you are introducted  to safe use of compressed air and describes the ways in which compressed air can be dangerous as well as how to minimise the risks of such dangers occurring

 

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: MUK-111
Course type: E-learning course
Duration: 30 minutes
Language: English
Price: NOK 500,-

Who is this course for?

Personnel requiring an awareness or understanding of the role of Banksmen and Slingers.

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

 

How will this course benefit me?

This course aims to give an overview of the roles of the Banksman and Slinger

 

How will this course benefit my company?

To ensure you have an overview of the roles of the Banksman and Slinger

 

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: MUK-060
Course type: E-learning course
Duration: 30 minutes
Language: English
Price: NOK 500,-

Who is this course for?
Trainee Oil and Gas Operations Technicians / Deck Crew

Is previous experience required?
You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

How will this course benefit me?
This course aims to provide an introduction to the use of storage tanks

How will this course benefit my company?
By ensuring you are introducted to the use of storage tanks

What standards are referred to in this course?
N/A

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: MUK-086
Course type: E-learning course
Duration: 3 hours
Language: English
Price: NOK 1500,-

Who is this course for?

All relevant personnel.

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role.

 

How will this course benefit me?

This course aims to provide an introduction to Gas Compression.

 

The course has seven modules:

Module 1: Introduction to Gas Compression

Module 2: Gas Compression Systems

Module 3: Gas Compressors and their Principles

Module 4: Gas Compressors and their Components

Module 5: Gas Compression Systems: Controlling Surge

Module 6: Gas Compression Systems: Start-up and Shutdown

Module 7: Gas Compression Systems: Innovation

 

How will this course benefit my company?

To ensure you have had an introduction to Gas Compression.

 

What standards are referred to in this course?

The course is made according to industry best practice.

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.This course has seven modules:

Course code: MUK-068
Course type: E-learning course
Duration: 20 minutes
Language: English
Price: NOK 500,-

Who is this course for?

For all personnel who are involved in working with gas turbines.

 

Is previous experience required?

No previous experience is required to complete this course.

 

How will this course benefit me?

This course aims to provide an introduction to gas turbines and how they are designed and operated.

 

How will this course benefit my company?

The course will benefit companies by ensuring that all relevant personnel have an understanding of gas turbines and how they are designed and operated.

 

What standards are referred to in this course?

No standards or regulations are referenced in this course.

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: MUK-037
Course type: E-learning course
Duration: 1 hour 30 minutes
Language: English
Price: NOK 1000,-

Course Goal: This course aims to provide learners with an introduction to the principles of the systems associated with oil and gas processing operations. 

Course code: MUK-127
Course type: E-learning course
Duration: 15 minutes
Language: English
Price: NOK 500,-

Who is this course for?

All relevant personnel

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

 

How will this course benefit me?

This course aims to provide an overview of the hazards associated with the use of portable hand tools and the measures that should be in place to control the risk of injury

 

How will this course benefit my company?

By ensuring you have an overview of the hazards associated with the use of portable hand tools and the measures that should be in place to control the risk of injury

 

What standards are referred to in this course?

Provision and Use of Work Equipment Regulations 1998 (PUWER)

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: MUK-181
Course type: E-learning course
Duration: 35 minutes
Language: English
Price: NOK 500,-

Who is this course for?

All personnel.

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role.

 

How will this course benefit me?

This course aims to provide learners with the knowledge of how to assess when it is safe to tackle a fire, information on different types of extinguisher, and an overview of how to operate a fire extinguisher safely.

 

How will this course benefit my company?

To ensure you have the knowledge of how to assess when it is safe to tackle a fire, information on different types of extinguisher, and an overview of how to operate a fire extinguisher safely.

 

What standards are referred to in this course?

The course is made according to industry best practice.

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: MUK-142
Course type: E-learning course
Duration: 15 minutes
Language: English
Price: NOK 500,-

Who is this course for?

Personnel requiring an awareness or understanding of flare systems.

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

 

How will this course benefit me?

This course provides an overview of flare systems.

 

How will this course benefit my company?

By ensuring you have an overview of flare systems.

 

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: MUK-141
Course type: E-learning course
Duration: 15 minutes
Language: English
Price: NOK 500,-

Who is this course for?
Newcomers to the Oil and Gas Industry

Is previous experience required?
You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

How will this course benefit me?
This course aims to provide a brief overview of fire and safety systems

How will this course benefit my company?
By ensuring you have a brief overview of fire and safety systems.

What standards are referred to in this course?
Health and Safety at Work Act
The Management of Health and Safety at Work Regulations
The Regulatory Reform (Fire Safety) Order
The Fire (Scotland) Act

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: MUK-176
Course type: E-learning course
Duration: 45 minutes
Language: English
Price: NOK 500,-

Who is this course for?

Personnel involved in UK oil and gas operations.

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

 

How will this course benefit me?

This course aims to highlight best practice in relation to environmental compliance and toidentify the environmental regulatory regime that oversees offshore installations and oil and gas operations within the UK Continental Shelf (UKCS).

 

How will this course benefit my company?

By ensuring you have been introduced to best practice in relation to environmental compliance and toidentify the environmental regulatory regime that oversees offshore installations and oil and gas operations within the UK Continental Shelf (UKCS).

 

What standards are referred to in this course?

 ISO 14001

Environmental Impact Assessment (EIA) Regulations

Habitat and Conservation Regulations

European Union Habitat Directive

Environmental Statement

Environmental Policy

European Union Offshore Safety Directive

OSPAR Convention

The Offshore Petroleum Production and Pipelines (Assessment of Environmental Effects) Regulations

The Offshore Petroleum Activities (Conservation of Habitats) Regulations

The Offshore Marine Conservation Regulations

The Offshore Combustion Installations (Prevention and Control of Pollution) Regulations

The Offshore Installations (Emergency Pollution Control) Regulations

The Offshore Chemical Regulations

The Greenhouse Gas Emissions Trading Scheme Regulations

The Offshore Petroleum Activities (Oil Pollution Prevention and Control) (OPPC) Regulations

The REACH Enforcement Regulations

The Fluorinated Greenhouse Gases Regulations

Integrated Pollution Prevention and Control (IPPC) Directive) 

Control of Major Accident Hazards (COMAH) Regulations

Merchant Shipping (Prevention of Pollution by Sewage and Garbage from Ships) Regulations

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: MUK-145
Course type: E-learning course
Duration: 45 minutes
Language: English
Price: NOK 1000,-

Who is this course for?

Personnel requiring awareness or understanding of upstream oil and gas operations.

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

 

How will this course benefit me?

This course aims to provide learners with an overview of upstream oil and gas operations.

 

How will this course benefit my company?

By ensuring you have an overview of the process of upstream oil and gas operations.

 

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: MUK-159
Course type: E-learning course
Duration: 45 minutes
Language: English
Price: NOK 500,-

Who is this course for?

This course is suitable for all personnel to assist in first aid.

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

 

How will this course benefit me?

This course is designed to enable personnel to treat a casualty who is injured at work, or suffers from a serious illness, while waiting for qualified medical assistance to arrive.

 

How will this course benefit my company?

By ensuring you enable personnel to treat a casualty who is injured at work, or suffers from a serious illness, while waiting for qualified medical assistance to arrive.

 

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: MUK-136
Course type: E-learning course
Duration: 15 Minutes
Language: English
Price: NOK 500,-

Who is this course for?

All personnel working with electricity in the Oil and Gas Industry

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

 

How will this course benefit me?

This course aims to provide all relevant personnel with an overview of the safety precautions to be taken when working on electrical equipment

 

How will this course benefit my company?

By ensuring you have an overview of the safety precautions to be taken when working on electrical equipment

 

What standards are referred to in this course?

Health and Safety at Work Act (1974)

Electricity at Work Regulations (1989)

Management of Health and Safety at Work Regulations (1999)

Electricity at Work Safe Working Practices (2003)

Offshore Electricity and Noise Regulations (1997) 

Provision and Use of Work Equipment Regulations (1998)

BS 7671: 2008 Requirements for Electrical Installations

Offshore Installations (Safety Case) Regulations 2005 

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%

Course code: MUK-088
Course type: E-learning course
Duration: 3 hours
Language: English
Price: NOK 1500,-

Who is this course for?

All relevant personnel

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

 

How will this course benefit me?

This course aims to provide an overview of Oil and Gas metering, Sampling and Pigging

This course contains seven modules:

Module 1: Introduction to Metering

Module 2: Gas Metering Principles of Flow Measurement

Module 3: Gas Metering

Module 4: Oil Metering

Module 5: Metering Operations

Module 6: Sampling Systems

Module 7: Pigging

 

How will this course benefit my company?

To ensure you have an overview of Oil and Gas metering, Sampling and Pigging

 

What standards are referred to in this course?

The course is made according to industry best practice. 

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: MUK-116
Course type: E-learning course
Duration: 15 minutes
Language: English
Price: NOK 500,-

Who is this course for?

Personnel requiring an awareness or understanding of common handling and storage methods for chemicals.

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

 

How will this course benefit me?

This course aims to provide an overview of the requirements for the handling and storage of hazardous substances

 

How will this course benefit my company?

By ensuring you have an overview of the requirements for the handling and storage of hazardous substances

 

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%. 

Course code: MUK-178
Course type: E-learning course
Duration: 30 minutes
Language: English
Price: NOK 500,-

Who is this course for?

Personnel who work with pumps in the Oil & Gas industry.

 

Is previous experience required?

No previous experience is required to complete this course.

 

How will this course benefit me?

This course aims to provide an overview of the various types of pumps used in the Oil and Gas Industry.

 

How will this course benefit my company?

The course will benefit companies by ensuring that all personnel who work with pumps have an overview of each type and how they work.

 

What standards are referred to in this course?

No standards or regulations are referenced in this course.

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: MUK-183
Course type: E-learning course
Duration: 30 minutes
Language: English
Price: NOK 500,-

Course Goal: This course aims toprovide learners with an overview of industry best practice associated with pressure vessel inspection

 

Learning Objectives:

LO1 Define what is meant by a ‘pressure vessel’

LO2 Give examples of pressure vessels

LO3 Identify the factors that can cause pressure vessel incidents

LO4 Identify the hazards posed by pressure vessel failure

LO5 Explain the requirements for inspections to be carried out by a competent person

LO6 Explain the requirements for a written scheme of examination

LO7 Describe how to carry out internal and external pressure vessel inspection

LO8 Describe how to carry out pressure pipework inspection

LO9 Explain the importance of carrying out regular pressure testing

LO10 Describe the control measures that are required to limit the risk posed by pressure vessels

Hits per page