Course catalogue

Who is this course for?

All relevant personnel.

Is previous experience required?

You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role.

How will this course benefit me?

This course aims to provide an introduction to Gas Compression.

The course has seven modules:

Module 1: Introduction to Gas Compression

Module 2: Gas Compression Systems

Module 3: Gas Compressors and their Principles

Module 4: Gas Compressors and their Components

Module 5: Gas Compression Systems: Controlling Surge

Module 6: Gas Compression Systems: Start-up and Shutdown

Module 7: Gas Compression Systems: Innovation

How will this course benefit my company?

To ensure you have had an introduction to Gas Compression.

What standards are referred to in this course?

The course is made according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.This course has seven modules:

Who is this course for?

Personnel who require awareness and understanding of the hazards and controls of common compressed air uses.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to encourage the safe use of compressed air and describes the ways in which compressed air can be dangerous as well as how to minimise the risks of such dangers occurring

How will this course benefit my company?

By ensuring you are introducted  to safe use of compressed air and describes the ways in which compressed air can be dangerous as well as how to minimise the risks of such dangers occurring

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

Personnel requiring awareness or understanding of upstream oil and gas operations.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to provide learners with an overview of upstream oil and gas operations.

How will this course benefit my company?

By ensuring you have an overview of the process of upstream oil and gas operations.

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

All personnel.

Is previous experience required?

You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role.

How will this course benefit me?

This course aims to provide learners with the knowledge of how to assess when it is safe to tackle a fire, information on different types of extinguisher, and an overview of how to operate a fire extinguisher safely.

How will this course benefit my company?

To ensure you have the knowledge of how to assess when it is safe to tackle a fire, information on different types of extinguisher, and an overview of how to operate a fire extinguisher safely.

What standards are referred to in this course?

The course is made according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

All relevant personnel

Is previous experience required?

You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

How will this course benefit me?

This course aims to provide an overview of the hazards associated with the use of portable hand tools and the measures that should be in place to control the risk of injury

How will this course benefit my company?

By ensuring you have an overview of the hazards associated with the use of portable hand tools and the measures that should be in place to control the risk of injury

What standards are referred to in this course?

Provision and Use of Work Equipment Regulations 1998 (PUWER)

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

Trainee Oil and Gas Operations Technicians.

Is previous experience required?

No previous experience is required to complete this course, but it is assumed that you are competent in your designated role.

How will this course benefit me?

By providing you with an overview of potable water systems.

How will this course benefit my company?

This course aims to provide personnel with an overview of potable water systems.

What standards are referred to in this course?

This course does not refer to specific legislation or standards.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

Trainee Oil and Gas Operations Technicians

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to provide an overview of fuel systems

How will this course benefit my company?

By ensuring you have an overview of fuel systems

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

"Who is this course for?

Personnel requiring awareness or understanding of gas detection and measurement methods.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to provide information about the types of gases found in the oil and gas industry and how these gases are detected and measured

How will this course benefit my company?

By ensuring you have  information about the types of gases found in the oil and gas industry and how these gases are detected and measured

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%. "

Who is this course for?

Personnel who require an awareness of scaffolding operations.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

This course will provide you with a brief overview of scaffolding safety.

How will this course benefit my company?

By ensuring personnel have an overview of the requirements for the safe use of scaffolding during operations.

What standards are referred to in this course?

This course does not refer to specific legislation or standards.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Accreditation:

This course is approved by the Institution of Occupational Safety and Health (IOSH).

IOSH is the world’s Chartered body for safety and health professionals. 

What that means:

We are the largest membership body for health and safety professionals.

We champion occupational safety and health causes and advocate for change.

We advise governments, NGOs and policymakers.

We facilitate safety and health awareness training in around 130 countries through IOSH Services Ltd, our wholly-owned trading arm.

We commission research and set national and international standards.

We shape the future of the profession.

Who is this course for?

Personnel who work with pumps in the Oil & Gas industry.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

This course aims to provide an overview of the various types of pumps used in the Oil and Gas Industry.

How will this course benefit my company?

The course will benefit companies by ensuring that all personnel who work with pumps have an overview of each type and how they work.

What standards are referred to in this course?

No standards or regulations are referenced in this course.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is the course for?  

Personnel with responsibility for the Control of Work at the worksite(s).  

Is previous experience required?    

You do not need prior knowledge or experience to complete this course.  

How will the course benefit me? 

This course helps learners plan and manage work safely by strengthening their understanding of risk controls, permits, and procedures which is essential in hazardous or tightly regulated environments.  

How will the course benefit my company? 

This course aims to ensure that all personnel have a consistent and common understanding of, and approach to Control of Work.  

What standards or regulations are referenced in the course? 

•     The Health and Safety at Work Act 

•     The Management of Health and Safety at Work Regulations 

•     The Offshore Installations and Pipeline Works (Management and Administration) Regulations 

•     The Control of Substances Hazardous to Health Regulations (COSHH) 

•     HSG 250 and 253 

•     Electricity at Work Regulations 

•     Provision and Use of Work Equipment Regulations (PUWER) 

•     Lifting Operations and Lifting Equipment Regulations (LOLER) 

•     Manual Handling Operations Regulations 

•     Personal Protective Equipment at Work Regulations 

•     Work at Height Regulations 

•     Control of Vibration at Work Regulations 

•     Control of Noise at Work Regulations 

•     Confined Spaces Regulations  

Course goal: This course aims to introduce, develop and increase learners’ knowledge and awareness of the importance of Risk Assessment and how it can reduce the likelihood of accidents in the workplace.

Learning Objectives

LO1 Explain the principles of, and steps involved in, the Risk Assessment process
LO2 Explain that employers have a responsibility for completing Risk Assessments and that employees have a duty to follow Risk Assessment outcomes
LO3 Identify a typical Risk Assessment form
LO4 Explain the requirements of the Risk Assessment team
LO5 Recognise and explain Risk Assessment terminology
LO6 Identify the different steps within the Risk Assessment process
LO7 Identify common, industry-specific hazards
LO8 Determine the appropriate level of Risk Assessment that may be required
LO9 Explain how to use a Risk Matrix to evaluate the level of risk
LO10 Explain how to identify appropriate control measures based on the Hierarchy of Control
LO11 Explain what is meant by ‘Initial Risk’ and ‘Residual Risk’
LO12 Describe what to do if any Residual Risk remains too high
LO13 Explain how to carry out a Personal Risk Assessment and recognise its importance before each task
LO14 Explain the importance of Dynamic Risk Assessment
LO15 Identify situations where ‘Stopping the Job’ may apply
LO16 Explain the importance of communicating the outcomes of a Risk Assessment
LO17 Understand the importance of communicating ‘Lessons Learned’

Who is this course for?

Personnel requiring an awareness or understanding of flare systems.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course provides an overview of flare systems.

How will this course benefit my company?

By ensuring you have an overview of flare systems.

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

FAST TRACK is a learning method which provides you with bespoke learning content by identifying any knowledge gaps you may have in a particular subject area.

FAST TRACK is a pre-assessment learning tool which is designed to assess your existing knowledge of a particular subject area. The pre-assessment uses a pool of questions to test your current knowledge. The results of this assessment help identify your personal knowledge gaps. FAST TRACK then automatically creates a bespoke course to address these knowledge gaps.

This course covers the following learning objectives:

LO1 Explain the importance of reducing and managing waste in general

LO2 Identify the different types of waste that are generated offshore

LO3 Describe the environmental impacts associated with waste streams

LO4 Identify the regulatory controls relating to waste

LO5 Describe the waste hierarchy

LO6 Explain the ways in which companies can manage and control waste to minimise environmental impact

LO7 Describe the everyday actions that all personnel can take in order to minimise waste

Who is this course for?

This course is suitable for all personnel to assist in first aid.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course is designed to enable personnel to treat a casualty who is injured at work, or suffers from a serious illness, while waiting for qualified medical assistance to arrive.

How will this course benefit my company?

By ensuring you enable personnel to treat a casualty who is injured at work, or suffers from a serious illness, while waiting for qualified medical assistance to arrive.

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

Oil and Gas Operations Technicians.

Is previous experience required?

You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role.

How will this course benefit me?

This course aims to provide an overview of coiled tubing equipment and its operation.

How will this course benefit my company?

To ensure you have an overview of coiled tubing equipment and its operation.

What standards are referred to in this course?

This course is made according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is the course for?

All personnel who could potentially be exposed to noise in the workplac

Is previous experience required?

No previous knowledge or experience is required to complete this course.

How will the course benefit me?

This course aims to provide personnel with the knowledge required to understand the hazards and controls associated with noise in the workplace.

How will the course benefit my company?

By ensuring personnel are aware of the hazards posed by noise in the workplace and the controls that should be put in place to minimise their exposure and reduce the risk of hearing loss.

What standards are referenced in the course?

Control of Noise at Work Regulations

Is there an assessment?

This has a course assessment with a 80% pass mark and 2 attempts.

Accreditation:

- CPD, IOSH

- This course is approved by the Institution of Occupational Safety and Health (IOSH).

- IOSH is the world’s Chartered body for safety and health professionals. 

What that means:

• We are the largest membership body for health and safety professionals.

• We champion occupational safety and health causes and advocate for change.

• We advise governments, NGOs and policymakers.

• We facilitate safety and health awareness training in around 130 countries through IOSH Services Ltd, our wholly-owned trading arm.

• We commission research and set national and international standards.

• We shape the future of the profession.

Course Goal: This course aims to provide learners with an introduction to the principles of the systems associated with oil and gas processing operations. 

FAST TRACK is a learning method which provides you with bespoke learning content by identifying any knowledge gaps you may have in a particular subject area.

FAST TRACK is a pre-assessment learning tool which is designed to assess your existing knowledge of a particular subject area. The pre-assessment uses a pool of questions to test your current knowledge. The results of this assessment help identify your personal knowledge gaps. FAST TRACK then automatically creates abespoke course to address these knowledge gaps.

Who is the course for?

All personnel involved with confined space entry work.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

This course aims to provide learners with an overview of industry best practice in relation to confined space entry work.

How will the course benefit my company?

The course will benefit companies by reducing confined space entry related injuries.

What standards are referenced in the course?

• Confined Space Regulations, and

• EH40/2005

Assessment Details

Course assessment has unlimited attempts to pass at 100%.

Who is this course for?

Personnel involved in UK oil and gas operations.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to highlight best practice in relation to environmental compliance and toidentify the environmental regulatory regime that oversees offshore installations and oil and gas operations within the UK Continental Shelf (UKCS).

How will this course benefit my company?

By ensuring you have been introduced to best practice in relation to environmental compliance and toidentify the environmental regulatory regime that oversees offshore installations and oil and gas operations within the UK Continental Shelf (UKCS).

What standards are referred to in this course?

 ISO 14001

Environmental Impact Assessment (EIA) Regulations

Habitat and Conservation Regulations

European Union Habitat Directive

Environmental Statement

Environmental Policy

European Union Offshore Safety Directive

OSPAR Convention

The Offshore Petroleum Production and Pipelines (Assessment of Environmental Effects) Regulations

The Offshore Petroleum Activities (Conservation of Habitats) Regulations

The Offshore Marine Conservation Regulations

The Offshore Combustion Installations (Prevention and Control of Pollution) Regulations

The Offshore Installations (Emergency Pollution Control) Regulations

The Offshore Chemical Regulations

The Greenhouse Gas Emissions Trading Scheme Regulations

The Offshore Petroleum Activities (Oil Pollution Prevention and Control) (OPPC) Regulations

The REACH Enforcement Regulations

The Fluorinated Greenhouse Gases Regulations

Integrated Pollution Prevention and Control (IPPC) Directive) 

Control of Major Accident Hazards (COMAH) Regulations

Merchant Shipping (Prevention of Pollution by Sewage and Garbage from Ships) Regulations

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.