Course catalogue

Presentation

This training course provides an overview of the different techniques employed for non-destructive tests (NDT) of materials and welding, their objectives and principles.

Objectives

On completion of the training, students will be able to:

Know the objectives and principles of the various non-destructive testing methods.

Differentiate NDT methods regarding application selection and physical principles.

Understand the evaluation process referred to the testing procedure.

Be familiar with the reliability of the various NDT methods.

Program

Definitions and terminology

Role of non-destructive testing

NDT methods

Systematisation of NDT methods

o Visual testing

o Penetrant testing

o Magnetic particles testing

o Radiographic testing

o Ultrasonic testing

Evaluation of NDT findings

Indications and flaws

Acceptance criteria

Reliability of NDT

Probability of detection

NDT operators certification

Certificate

On completion of the training program, the student will be awarded:

A Certificate of Introduction to NDT, issued by Bureau Veritas Solutions Marine & Offshore.

The Certificate of Introduction to NDT is obtained after completion of the course and passing the online test.

Presentation

This training course provides a general overview of the requirements of the International Load Lines Convention and the conditions of assignment of load lines.

Objectives

On completion of the training, students will be able to:

Know the general requirements of the International Load Lines Convention and understand the conditions of assignment of load lines.

Know the different types of surveys; understand the scope of each survey and the certificates, records and documents associated with the Load Lines Convention.

Know the most common deficiencies and PSC detainable items in connection with the Load Lines Convention.

Program

History of Load Lines Convention

Purpose of the Convention

Definitions

Freeboard calculation

Load line marks

Conditions of assignment

o Information to be supplied to the Master

o Doors

o Cargo and other hatchways

o Machinery space openings and miscellaneous openings

o Ventilators and air pipes

o Scuppers, inlets and discharges

o Scuttles and windows

o Freeing ports

o Protection of crew

o Special conditions of assignment for Type A ships

Special requirements for ships assigned with timber freeboards

Certificates, records and other documents

Scope of Load Line surveys

o Initial survey

o Annual survey

o Renewal survey

Common PSC deficiencies related to Load Lines

o PSC statistics

o Detainable deficiencies

Certificate

On completion of the training program, the student will be awarded:

A Certificate of Load Lines, issued by Bureau Veritas Solutions Marine & Offshore.

The Certificate of Load Lines is obtained after completion of the course and passing the online test.

Hensikt: Grunnleggende overlevelsestrening for offshore vindindustri. 

Ved gjennomføring av Global Wind Organization (GWO) Basic Safety Training (BST) vil delegatene ha en bevissthet om farene som oppstår når de arbeider i vind-industrien og hvordan man kontrollerer og reduserer disse farene.

Kursdeltakerne vil få (repetert) kunnskap og ferdigheter til å anerkjenne fordeler og begrensninger knyttet til livreddende utstyr og PVU samt korrekt bruk av dette i forbindelse med offshore vind. 

Hensikten med kurset er å gi deltakerne kunnskaper/oppfriskning om livreddende utstyr, GMDSS og SAR utstyr, hvordan en kollektivt kan øke sjansen til overlevelse i en nødsituasjon, hvordan entre og forlate vindturbiner, samt evakuering i nødsituasjoner. 

Kurset dekker krav til opplæring av personell og repetisjonskurs både land- og havvind iht:

- Global Wind Organization (GWO)

- Arbeidstilsynet (Forskrifter)


Kompetanse for «Sea Survival» skal vedlikeholdes iht. retningslinje i GWO standarden. Det skal gjennomføres repetisjonskurs hvert 2. år.

This course is only available in Norwegian.

LEARNING OBJECTIVES

The period of supervised DP sea time days after the Simulator Course may be reduced by a maximum of 30 days by the satisfactory completion of an intensive DP Simulator Course.

CONTENT

• Study of DP incidents
• Construction and use of worksite diagrams, Electronic Charts and Vessel templates for use in DP operations
• Preparation of plans for a projected DP operation,contingency plans for expected deviations and emergencies
• Participation in simulated situations in a variety of DP operations while handling routine and emergency situations
• Risk and safety analysis, and defining DP equipmentclasses
• The DP system’s utilization of position

LEARNING PROCESS

The participants will work with practical scenarios based on real operations, training on planning and executing specified operations under varying simulated conditions.

During the operations, typical DP failure modes will be included. Communication with field control, other vessels and the different departments onboard will be included. A rotation plan will be made for participants to act in different roles during the course.

The scenarios will be run on a K-POS DP system Class2, in a full mission simulator environment connected to an advanced simulator control (NI Class A).

SPECIAL INFORMATION

The Sea Time Reduction Course reduces phase D of the Nautical Institute (NI) DP Operator Certification Scheme (watchkeeping experience). The course will be logged into the Nautical Institute DP Operator’s log book and reduce the Watchkeeping Experience requirements by 30 days

CERTIFICATE

Certification of attendance will be issued on succcessful completion of the course.

LEARNING OBJECTIVES

By the end of the course the participants should:

• Have acquired knowledge of the latest rules and regulations
• Have acquired knowledge of the latest developments within sensors and Position Reference Systems (PRS)
• Have acquired knowledge of the latest relevant DP incidents and why they occurred
• Be able to recognize the various alarm, warning and information messages
• Carry out operational planning, risk assessment and hazard identification tasks
• Set up the DP system for a particular task/ operation
• Decide on courses of action because of system failure

CONTENT

The course is conducted as classroom training, combining theoretical presentation (Show-and Tell Lessons) and practical work/discussion with exercises in simulator and guidance (Stair-Step learning design). For practical capabilities and skills, exercises are performed in full equipped DP simulator. This course will fulfil the revalidation learning objectives as specified by Nautical institute.

SPECIAL INFORMATION

At present (2016), the requiremets is that the holder of a Nautical Institute (NI) DPO certificate must revalidate their DPO certificates.

The requirement is that the DPO must have at least 150 days of DP sea time experience in the previous 5 years, if not NI DPO Revalidation course is needed.

CERTIFICATE

A certificate acceditated by the Nautical Institute will be issued on succcessful completion of the course.

LEARNING OBJECTIVES

After the course the participant is able to:
• Operate the system
• Understand the basic principles of stability
• Safe vessel operation and utilization of load capacity

CONTENT

Themes in the course are:
• Basic stability theory
• System setup and configuration
• Basic operation and understanding of the system
• Intact stability and utilization of vessel capacity
• Damage stability with emergency response

LEARNING PROCESS

The training will be a combination of theoretical lessons and practical exercises. Each participant will use a PC with necessary software installed to do training cases. 

SPECIAL INFORMATION

This course is done on a demo ship with a generic software.

CERTIFICATE

Certificate of attendance will be issued upon completion of the course.

LEARNING OBJECTIVES

After the course, the successful participants are able to:

• Define the principles of DP
• Recognise the component parts of a DP system
• Understand the relationship between vessel movement  position reference systems, sensors, computers propulsion units and feedback
• Understand the concept of redundancy
• Understand the DP modes of control
• Describe the operation of sensors and common position reference systems
• Describe propulsion units, types and configurations
• Understand power supply, redundancy and management
• Practice communication and watch handover procedures

CONTENT

• Definition of DP, elements of the DP system, DP systems redundancy, and Class Requirements
• Functions of the DP system, and DP principles
• Different types of DP vessels and DP operations, sensors and use of sensor inputs
• Introduction to position reference systems and the DP system’s use of position measurements
• Vessel capability, DP consequence analysis and DP capability analysis
• Thrusters and manoeuvring systems
• Power systems and Blackout Prevention
• Operational procedures for DP operation, and procedures for operating the DP system
• Study of DP incidents
• Principal use of the DP system

LEARNING PROCESS

The training will be a combination of theoretical lessons and practical exercises. During the course each participant will have his own operator station with generic DP software.

SPECIAL INFORMATION

The DP Induction course is the first phase of the Nautical Institute (NI) DP Operator Certification Scheme. The course participants will be issued with the NI Dynamic Positioning Operator’s Log Book upon successful completion of the DP Induction Course.

This course is according to the system specific competence requirements in IMO STCW Regulations I/14 1.5, Part A-I/14 2.1.1, part B V/f 6 and IMCA M117.

CERTIFICATE

A certificate accreditated by the Nautical Institute will be issued on succcessful completion of the course.

LEARNING OBJECTIVES

This course aim to improve the participants knowledge, understanding and skills in the following overall learning objective(s):
• Obtain competence of forces involved, related to ship handling in general, and offshore loading in particular
• Obtain competence of planning and manual maneuvering in port, narrow waters and at offshore loading installations
• Obtain competence of the Equinor, Teekay and OGUK’s requirements for training of shuttle tanker personnel
• Improve skills in performing good Bridge Team Cooperation and communication
• Improve competence in use of all propulsion machinery, navigational equipment, steering systems and deck equipment involved

CONTENT

The course content aim to give the participants basic knowledge, understanding and skills of: • Ship handling
• Pivot point
• Propellers/rudders
• Thrusters
• Anchoring
• Waves/currents
• Tugs
• Squat/sink age/interaction
• ROT technique

LEARNING PROCESS

The course is divided into modules and consists of totally nine theoretical lessons and eight selected simulator exercises. Participant learning progress is assessed by concurrent evaluation of it during both theory sessions and simulator exercises.

CERTIFICATE

Certification of attendance will be issued on successful completion of the course.

LEARNING OBJECTIVES

This course is specifically designed for training future DPO’s on board a large number of offshore vessels.

The course aim to provide the candidates with knowledge and skills as preparation for DNV DPO Advanced Operations exams and certification.

By the end of course the students shall have:

• Acquired a thorough knowledge of the various types of DP operations such as ROV operations, cable laying pipe laying, trenching, dredging and rock-dumping
• The capability to operate the DP in the various modes associated with such operations, i.e. joystick,  auto pos mode, autotrack mode and follow target mode
• Recognize when environmental conditions or system failure  requires DPO to take action to avoid hazardous situations
• The  ability to carry out such operations according to existing operational guidelines and checklists
• The ability  to demonstrate good personal attitudes towards safety in operating DP vessels according to best practice in the industry

CONTENT

Planning,  briefing and de-briefing of various field exercises according to the existing guidelines, regulations, and industry standards. Repetition of necessary DP theory to close any knowledge gap the students may have in these subjects.

LEARNING PROCESS

All DP  exercises will be carried out on a full scale DNV GL Approved DP Class A simulator, using vessels that are equipped according to DP class 2 and 3. The participants will perform both surface and subsea  operations, utilizing the following DP modes: Joystick, Autoposition, Autotrack and Follow target functionalities.

SPECIAL INFORMATION

• DNV GL, Standard for Certification no. 0023
• DNV GL, Standard for Certification no. 0008
• DNV GL, RP-0007
• NMA 201209765-4/813.4.
• GOMO, Guidelines for offshore marine operations, Supply and Rig Move Operations and other relevant guidelines such as IMCA M-117 and other IMCA guidelines

A level test will be conducted before commencing the course.

CERTIFICATE

Certification of attendance will be issued upon successful completion of the course.

Hensikt:

Målsetting med opplæring er at den som gis opplæring tilegner seg tilstrekkelig kunnskap om metoder for å lede og veilede løfteoperasjoner slik at de blir forskriftmessig utført.

Opplæringen gir også kunnskap om farer forbundet med løfteoperasjoner samt bruk av risikokartlegging.

Kurset gir deltakere kunnskap til å kunne utøve overordnet operasjonell ledelse av løfteoperasjoner. Med det menes å kunne planlegge, risikokartlegge og evaluere, samt forebygge ulykker. Videre vil deltaker også tilegne seg kunnskaper om å gjøre rede for materialhåndteringsplan, oppbevaring og bruk av utstyr.

Målsetting med opplæring er at den som gis opplæring tilegner seg tilstrekkelig kunnskap om metoder for å lede og veilede løfteoperasjoner slik at de blir forskriftmessig utført.

Innhold:

• Krav og ansvar til rollen operasjonelt ansvarlig

• Lover, forskrifter, standarder og retningslinjer som gjelder vedr. bruk av løfteutstyr

• Overordnet operasjonell ledelse av løfteoperasjoner

• Helhetlig planlegging av løfteoperasjoner

• Risikokartlegging

• Identifisering av og etablering av barrierer. Gjennomføring og evaluering av en løfteoperasjon

• Informasjonsutveksling

• Krav for oppbevaring av løst løfteutstyr

• Krav for ulike typer løfteutstyr

• Krav til fadder, praksis og sensor

• Avsluttende prøve

Objective: The aim of the training is that theoretical and practical knowledge about fall protection and the correct use of rescue equipment, rescue of free-hanging persons, rescue of personnel over open sea, tank, stretcher transport, descent and treatment of personnel after fall accident is refreshed and repeated.

The training is adapted for personnel who are part of fall protection / rescue teams on board an installation. Participants must gain expertise in risk assessment, rescue (equipment and methods) and first aid.

Covers repetition requirements every 2nd year in accordance with NOG 113 and SFS.

Content:

Introduction
Regulations
Review of accidents and incidents
The rescue service
Equipment
Routines when working at height
Risk assessment
Management, site of injury
Stress and stress management
Hanging trauma, CPR
Rescue drills
Evaluation

Objective: The purpose of the training is to provide users of work equipment mentioned in § 10-1 and 10-3 in «Regulations on the performance of work» (no. 1357), a good general basic training in the safe use of work equipment, so that accidents and accidents in connection with use is avoided.

The authorities set requirements for basic safety certification of persons who are to drive forklifts, mass transfer machines and cranes. The requirements include both theoretical and practical training. To complete the common theory, one must take and pass a theoretical exam.

Module 1.1 Working environment, responsibilities and consequences are common to machine, forklift and crane. If you can document that you have module 1.1 from before that is not older than 3 years, you can start right on module 2.3.

Content:

- Laws and regulations
- Working environment, responsibilities, and consequences
- Environmental
- Safety regulations
- Dangerous goods, marking and handling

This course is taken externally on the Astutis platform, the delegate will receive a separate email from the provider with access details once this is processed by Astutis.

The enrolment will then be marked complete in Trainingportal once the course is passed.

Provided in association with Astutis, NEBOSH Learning Partner 807.

The NEBOSH National Diploma in Occupational Health and Safety is an advanced health and safety qualification. Equivalent to an undergraduate degree in OHS. The NEBOSH Diploma is NEBOSH's flagship qualification. It is recognized by employers and professional bodies in over 180 countries around the world!

The qualification will develop competence in all areas of health and safety so you can reduce risk in dangerous environments and keep people safe. It is the ideal course if you want a successful, long-term career in health and safety.

Unit A: Managing Health and Safety

This unit provides an in-depth understanding of the key areas for managing health and safety, covering moral, economic, and societal drivers, health & safety law, and health & safety management systems.

A1-Principles of health & safety management, A2-Principles of health & safety law, A3-Criminal Law, A4-Civil Law, A5-Loss causation and incident investigation, A6-Measuring and reviewing health and safety, A7-Identifying hazards, assessing and evaluating risk, A8-Risk control, A9-Organisational factors, A10-Human factors, A11-The role of health & safety practitioner.

Unit B: Hazardous Agents in the Workplace

Unit B details all major aspects of managing chemical, biological, physical and physiological hazards in the workplace.

B1-Managing Occupational Health, B2-Identification, assessment & evaluation of hazardous substances, B3-Control of hazardous substances, B4-Monitoring and measuring, B5-Biological agents, B6-Physical agents - noise and vibration, B7-Physical agents - radiation, B8-Mental ill-health & dealing with violence & aggression at work, B9-Musculoskeletal risks and controls, B10-Work environment risks and controls.

Unit C: Workplace and Work Equipment Safety

Unit C provides a thorough understanding of how to create and manage safe working environments, covering welfare, fire, dangerous substances, work equipment, electricity, construction, and transport.

C1-Workplace welfare requirements and specific workplace issues, C2-Fire and explosion, C3-Workplace fire risk assessment, C4-Storage, handling, and processing of dangerous substances, C5-Work equipment (general), C6-Work equipment (workplace machinery), C7-Mobile, lifting, access, and work at height equipment, C8-Electrical safety, C9-Construction & works of a temporary nature - hazards and controls, C10-Workplace transport and driving for work.

Do you want to mentor an environment of innovative thinking in your organization? A leader needs to have some qualities to promote innovative thinking among their team members. The leader also needs to know the techniques of exercising innovation. This lesson outlines the qualities and techniques as well as the four-step process of leading innovation sessions. You can also learn various strategies to maintain the environment of innovation in your organization. It encourages you to challenge your processes and think out of the box. This is a must-learn lesson for persons who want to lead innovation teams effectively.

• Describe an ideal change leader and team members

• Explain the techniques of exercising innovation

• Describe the four-step process of leading innovation sessions

The old saying, greater the risk, greater the rewards has probably rung true for many of us in different stages and areas of life. However, still most people tend to avoid risks when possible, because they think that inaction is often safer than action. The belief is that taking a risk is “exposing oneself to the possibility of loss or injury in the hopes of achieving a gain or reward.” But the legendary boxer Muhammed Ali stated “He who is not courageous enough to take risks will accomplish nothing in life.” In this course, you will learn to mitigate risks and start taking calculated risks.

• Recognize the need for smart risk-taking and its 5 components

• Determine the strategies of smart risk-taking  

• List the types of risk-taking cultures

Consistent business analysis is critical to a company’s short- and long-term success. Because the SWOT framework is such a simple, flexible, and powerful tool, organizations can use it to examine, plan, and implement business decisions and plans that range from incremental to comprehensive. By gathering a range of input from inside and outside the organization, your analysis will provide substantial, relevant, and objective data to guide your decision-making. Whether you’re planning new corporate-wide strategic goals or reviewing departmental processes, a well-executed SWOT analysis will enable you to focus on your strengths, diminish threats, and take advantage of identified business and market opportunities as you move forward.

• Describe SWOT Analysis   

• Conduct a SWOT Analysis   

• Create a SWOT Action Plan

The balance sheet is one of several financial reports that organizations use for monitoring and planning purposes. It is a snapshot of a company’s financials on a specific date. All balance sheets include three components: assets, liabilities, and owner’s (or shareholder’s) equity. The report shows the resources an organization owns (assets), how much money it owes (liabilities), and how much equity the owners (or shareholders) have after liabilities are subtracted from the assets. This is also called the net worth of the company. Some of the benefits of being able to read and understand a balance sheet include making better management decisions, identifying potential financial issues before they cause bigger problems, and improving your company’s organizational efficiency.

• Record the assets of a company    

• Define liabilities    

• Explain owner’s equity

Presentation

This training course provides an overview of the Ultrasonic Testing (UT) method for non-destructive examination of materials and welding, its objectives and principles.

Objectives

On completion of the training, students will be able to:

Understand the basic physical principles of ultrasonic testing.

Know the testing procedure and the inspection process referred to the equipment used.

Differentiate applications and the acceptance criteria applied.

Get familiar with the purpose of calibration and reference blocks to ensure the quality of test performance and test results.

Program

Basic principle

o Ultrasonic waves and propagation

o Ultrasonic pulse-echo principle

Equipment and testing materials

o Ultrasonic testing instruments

o Ultrasonic testing probes

o Coupling media

o Calibration and reference blocks

Testing procedure

o Surface preparation

o Scanning – ultrasonic testing techniques

o Testing parameters

o Examination

o Data presentation

Applications and acceptance criteria

o Scope

o Indication evaluation

o Acceptance criteria

o Test report

Reliability, quality of test results

o UT system performance

o NDT personnel competence

Certificate

On completion of the training program, the student will be awarded:

A Certificate of NDT – Ultrasonic Testing, issued by Bureau Veritas Solutions Marine & Offshore.

The Certificate of NDT – Ultrasonic Testing is obtained after completion of the course and passing the online test.

Presentation

This training course provides a general introduction to welding, including an introduction to metallurgy, general information concerning welding, an overview of the electric arc processes commonly used in shipbuilding and details of welding inspection.

Objectives

On completion of the training, students will be able to:

Understand the nature and know the mechanical properties of metals; Understand the production process of steel and aluminium and the application of casting and forging processes.

Understand fundaments of fusion welding; Know how to determine heat input and preheat temperature; Understand the influence of the thermal cycle on weld microstructure and distortion; Know the general types of welding joints and the different welding positions

Know how to differ and recognize the arc welding processes used in shipbuilding; Understand the applicability and limitations of the different welding processes; Get familiar with common types of arc welding equipment and power sources

Know and apply the required activities in welding inspection; Determine and arrange the scope of inspection plan for different tasks; Know the different types of weld imperfections; Understand how to perform visual inspection of welding

Program

Module 1 – Introduction to Metallurgy

Module 2 – Welding Fundamentals

Module 3 – Arc Welding Processes

Module 4 - Welding Inspection

Certificate

On completion of the training program, the student will be awarded:

A Certificate of Welding Fundamentals, issued by Bureau Veritas Solutions Marine & Offshore.

The Certificate of Welding Fundamentals is obtained after completing the course and passing the online test.

To better understand today’s digital age, it’s important to look back at the Industrial Revolution. As Steve Jobs said, “You can’t connect the dots looking forward, you can only connect them looking backward.” Just as the steam engine and other machines transformed the 18th-century economy, digital technologies are changing our world economy, business practices, customer expectations, and societal norms—and will continue to do so for the foreseeable future. And while it’s impossible to predict the exact changes that lie ahead, it’s possible to predict who will succeed: agile organizations who are able to quickly take advantage of new opportunities by applying digital technologies.

• Understand the parallels between the industrial revolution and the digital revolution

• Define Digital Transformation

• Understand how digital is changing the operation of businesses, affecting all business sectors, and is making organizations flatter